1Z0-878 | A Review Of Virtual 1Z0-878 braindumps
Q91. Which two are valid host names in /etc/inet/hosts? (Choose two.)
A. 21a
B. Twenty1a
C. twenty one a
D. bldg1-floor2-room3
E. abcdefghijklmnopqrstuvwxyz
Answer: B,D
Q92. You are setting up a new help desk technician. The help desk technician is responsible for administering all user privilege aspects. The technician must be able to answer user requests for forgotten passwords and set and change user passwords. The new technician must also be able to read the configuration files related to other users. However, the technician's supervisor must make any changes that are required. The help desk technician will use the login name of helpdesk4. The userid of helpdesk4 has already been created as an unprivileged user. Which two commands add the authority to the helpdesk4 user to change user passwords, but only allow read-only access to user and role configuration files?
(Choose two.)
A. usermod -A solaris.* helpdesk4
B. usermod -A solaris.admin.usermgr.read helpdesk4
C. usermod -A solaris.admin.usermgr.pswd helpdesk4
D. roleadd -A solaris.admin.usermgr.pswd helpdesk4
E. roleadd -A solaris.admin.usermgr.read helpdesk4
F. usermod -A solaris.admin.usermgr.grant helpdesk4
Answer: B,C
Q93. Which statement is true about the number of data sources that can be specified in the Name Service Switch file for each of the data types? (Choose two.)
A. A minimum of one can be specified.
B. A minimum of two can be specified.
C. A maximum of four can be specified.
D. The maximum number that can be specified depends on the data type.
E. The maximum number that can be specified depends on the system type.
Answer: A,D
Q94. Given:
# df -lh Filesystem size used avail capacity Mounted on /dev/dsk/c1t0d0s0 31G 3.4G 28G 11% / /devices 0K 0K 0K 0% /devices proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab fd 0K 0K 0K 0% /dev/fd swap 4.0G 112K 4.0G 1% /var/run swap 4.0G 18M 4.0G 1% /tmp /dev/dsk/c3t1d0s6 115G 8.1G 106G 8% /export /dev/md/clones/dsk/d10
4.9G 537M 4.3G 11% /export/clones/on81-test
/dev/md/clones/dsk/d20
4.9G 656M 4.2G 14% /export/clones/on10-test
/dev/md/clones/dsk/d30
4.9G 220M 4.7G 5% /export/clones/on10-stc2
Which command helps determine the configuration of the Solaris Volume Manager logical volumes?
A. metadb -i B. metadb -a C. metainit -p D. metastat -a
Answer: D
Q95. You have an x86-based system with mirrored boot drives (cid0p0 and c2d0p0). To enable the system to boot off of the disk (c2d0p0) which holds the secondary submirror when the primary boot disk (cid0p0 ) fails, you need to configure the system to see c2d0p0 as the alternate boot device. Which answer describes the procedure used to configure the alternate boot device?
A. Edit the /boot/grub/menu. 1st file and add the following information:
root (hdl,0,a)
kerne1 /boot/multi boot
module /boot/s86.miniroot—safe
B. Edit the bootenv. re file and enter a value for the altbootpath parameter as follows:
altbootpath=c2d0p0 .
C. Use the kernel command to edit the boot entries in the GRUB main menu as follows:
root (hdl,0,a)
kerne1 /boot/multiiboot
module /boot/x86.miniroot—safe
D. Press the space bar when the GRUB menu is visible during the boot process to edit the list of
commands, and enter the command to boot from the alternate disk drive.
Answer: A
Q96. A user is having LDAP client problems. The profile with which the client was configured was updated over night. From the error messages it would appear that the daemon on the client responsible for updating the profile might NOT have started.
Which daemon on the client is responsible for updating the profile?
A. ldap_client
B. ldap_update
C. ldap_profile
D. ldap_cachemgr
Answer: D
Q97. The administrator of the dbzone zone has requested a dedicated file system on which to install a database. The administrator requests that this be mounted as /database within the zone.
The host system has a metadevice d120 that has been allocated for dedicated use for this purpose.
The dbzone zone is currently NOT booted.
# zonecfg —z dbzone
zonecfg:dbzone > add fs
zonecf g:dbzone:f s > Which four commands are necessary to complete the administrator's request? (Choose four.)
A. set type=ufs
B. set special=rw
C. set dir=/database
D. set raw=/dev/md/rdsk/dl20
E. set special=/dev/md/dsk/dl20
F. add inherit—pkg—dir dir=/database
G. set zonedir=/export/dbzone/database
Answer: A,C,D,E
Q98. You have created a shell script to transfer files to a remote system. At the end of the script, you want to send a message to the sysiog messaging facility stating that the file transfer is complete. Which entry would send the Transfer Complete?message to the sysiog messaging facility?
A. echo "Transfer Complete" > syslogd
B. logger "Transfer Complete"
C. log "Transfer Complete"
D. sysiog —1 "Transfer Complete"
Answer: B
Q99. Which answers describe characteristics of the non-global zone? (Choose two)
A. A unique zone ID for each individual zone, starting at id 0.
B. A non-global zone has its own unique kernel.
C. Unaware of other non-global zones except the global zone.
D. Shares the Solaris kernel with the global zone.
E. The non-global zone can contain software that is not installed from or shared with the global zone.
Answer: D,E
Q100. Given:
# metadb; metastat -c flags first blk block count a u 16 8192 /dev/dsk/c1t0d0s3 a u 16 8192 /dev/dsk/c1t1d0s6 a u 8208 8192 /dev/dsk/c1t1d0s6 a u 16 8192 /dev/dsk/c1t2d0s6 a u 8208 8192 /dev/dsk/c1t2d0s6 a u 16 8192 /dev/dsk/c1t3d0s6 a u 8208 8192 /dev/dsk/c1t3d0s6 d100: Mirror Submirror 0: d10 State: Okay Submirror 1: d11 State: Resyncing Submirror 2: d12 State: Resyncing Resync in progress: 1 % done Pass: 1 Read option: roundrobin (default) Write option: parallel (default) Size: 54330534 blocks (25 GB) d10: Submirror of d100 State: Okay Size: 54330534 blocks (25 GB) Stripe 0: Device Start Block Dbase State Reloc Hot Spare c1t1d0s6 17334 Yes Okay Yes d11: Submirror of d100 State: Resyncing Size: 54330534 blocks (25 GB) Stripe 0: Device Start Block Dbase State Reloc Hot Spare c1t2d0s6 17334 Yes Okay Yes d12: Submirror of d100 State: Resyncing Which three statements are true about this configuration? (Choose three.)
Size: 54330534 blocks (25 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t3d0s6 17334 Yes Okay Yes
Device Relocation Information:
Device Reloc Device ID
c1t3d0 Yes id1,sd@THITACHI_DK32EJ-36NC 434H9227
c1t2d0 Yes id1,sd@THITACHI_DK32EJ-36NC 434H4187
c1t1d0 Yes id1,sd@THITACHI_DK32EJ-36NC 434J1501
A. The d10 metadevice is currently out of date.
B. The d11 metadevice is currently out of date.
C. The d12 metadevice is currently out of date.
D. The d100 metadevice is configured as a three-way RAID-1 mirror volume. E. The d100 metadevice is configured as a three-way RAID-0 striped volume. F. The d100 metadevice is configured as a seven-way RAID-1 mirror volume. G. The d100 metadevice is configured as a seven-way RAID-0 striped volume.
Answer: B,C,D