200-150 | Real 200-150 Exam Dumps 2021

NEW QUESTION 1
Which statement about FHRP protocols is true?

• A. GLBP group member routers respond to ARP requests by providing their physical MAC addresses
• B. If HSRP priority is not configured, then the router with the highest IP address in the group is elected as active
• C. VRRP and GLBP are standards-based protocols
• D. VRRP provides load balancing by sharing the same virtual MAC address on all VRRP routers

Answer: A

NEW QUESTION 2
Which two options describe what can happen when devices are in the same broadcast domain? (Choose two.)

• A. They are on the same VLAN and the same switch.
• B. They are on different VLANs and the same switch.
• C. They are on different VLANs and different switches.
• D. They are on the same VLAN and different switches.

Answer: AD

NEW QUESTION 3
Before you configure an SVI on a Cisco Nexus Series switch, which command must you enter?

• A. Feature pim
• B. feature ospf
• C. feature interface-vlan
• D. feature private-vlan

Answer: C

NEW QUESTION 4
Which is a Call Control Device in a Cisco Collaboration environment?

• A. Cisco Content Server
• B. Cisco Meeting Server
• C. Cisco Telepresence Management Suite
• D. Cisco Expressway

Answer: B

NEW QUESTION 5
A network engineer examines a data capture and finds a lage amount traffic with the destination address of FF;FF;FF;FF;FF;FF. What type of address is this?

• A. Layer 2 broadcast address
• B. Layer 3 broadcast address
• C. layer 3 network address
• D. a multicast address

Answer: D

NEW QUESTION 6
In which call processing stage can analias be changed by a rule into another form?

• A. Search Rules
• B. Find Rules
• C. Hunt Rules
• D. Conference Rules

Answer: A

NEW QUESTION 7
Which two terms can take the place of the wildcard mask in an ACL?

• A. eq
• B. deny
• C. host
• D. all
• E. any

Answer: BC

NEW QUESTION 8
Drag and drop the CLI configuration command on the left to the correct order on the right to configure a Layer 3 interface. Not all options are used.

Answer:

Explanation:
Interface ethernet1/13 No switchport
Ip address 192.168.1.254/24 No shutdown

NEW QUESTION 9
Which three terms are used to describe data at Layers 1, 2, and 4 of the OSI model? (Choose three.)

• A. PDUs
• B. Bits
• C. Sequences
• D. Segments
• E. Packets
• F. Frames

Answer: BDF

Explanation: Bits -1 layer Frames - 2 layer Segments - 4 layer
http://en.wikipedia.org/wiki/OSI_model

NEW QUESTION 10
Which two protocols can you use SAN storage that is accesses via low-latency, high-bandwidth networking?
(Choose two.)

• A. AFP
• B. CIFS
• C. NFS
• D. FCP
• E. iSCSI

Answer: BC

NEW QUESTION 11
An engineer is configuring a new MDS switch. The switch is powered on, the customer connects to the console, and the initial setup script is started.
Which two items can be configured during this setup process?

• A. default port-channel mode
• B. default port VSAN membership
• C. default switch port interface state
• D. default zone mode
• E. default storage VDC

Answer: CD

NEW QUESTION 12
What is the principle function of the data center core layer?

• A. high-speed packet switching
• B. access control
• C. firewalling and intrusion prevention
• D. QoS marking

Answer: A

NEW QUESTION 13
For which reason would you implement a VSAN?

• A. to overcome the limitations of zoning
• B. to virtualize storage
• C. to segment the physical fabric into multiple logical fabrics
• D. to overcome the limitations of LUN masking

Answer: C

NEW QUESTION 14
Drag and drop the FCoE protocols on the left to the correct descriptions on the right.

Answer:

Explanation: DCBXP =used to announce, exchange, and negotiate node parameters between peers ETS = provides prioritized processing based on bandwidth allocation
PFC = Flow control mechanism
FIP =perform device discovery, initialization, and link maintenance

NEW QUESTION 15
Which option includes the two devices that can be connected when a Cisco Fabric Extender Transceiver is used?

• A. Server to Cisco Nexus 5548 Switch
• B. Server to Cisco Nexus 5010 Switch
• C. Cisco Nexus 2000 Series Fabric Extender to Cisco Nexus 5500 Switch
• D. Server to Cisco Nexus 2000 Series Fabric Extender

Answer: C

NEW QUESTION 16
Which Cisco UCS power policy mode enables a configuration that can tolerate the loss of an input power circuit?

• A. nonredundatnt
• B. Grid
• C. N+1 in normal mode
• D. N+1 in high-density mode

Answer: B

Explanation: Grid Redundant (N+N) – below: The purpose of the grid redundant mode is to enable a configuration that can tolerate the loss of either a power supply or a input power circuit. In grid-redundant mode the system can withstand the loss of any two power supplies. The Figure 5 shows the required wiringScheme for Grid Redundant power where N=2.

NEW QUESTION 17
Which protocol data unit is associated with the link layer of the TCP/IP model?

• A. frame
• B. packet
• C. segment
• D. datagram

Answer: A

NEW QUESTION 18
Refer to the exhibit.

You want to restrict access from Host B. Where do you apply the ACL?

• A. to a VTY by using a named ACL
• B. to the outbound interface of the router
• C. to the inbound interface of the router
• D. to the inbound and the outbound interfaces of the router

Answer: D

NEW QUESTION 19

Refer to the exhibit. NP uplink ports connected to the core NPIV switch do not come online and are stuck in an initializing state. Which options is a cause for this behavior?

• A. The upstream NP Ports and the downstream server F Ports on the NPV edge switch may not be in the same VSA.
• B. The core switch has not been enabled for NPIV.
• C. The upstream VSAN ports and the server ports are in full duplex mode.
• D. Related VSAN identifier is not allowed on Virtual Port Channels toward the edge switch.

Answer: B