200-150 | Downloadable 200-150 Dumps Questions 2021
Cause all that matters here is passing exam with . Cause all that you need is a high score of . The only one thing you need to do is downloading free now. We will not let you down with our money-back guarantee.
Check 200-150 free dumps before getting the full version:
NEW QUESTION 1
Which OSI reference model layer provides flow control, sequencing, and acknowledgments?
- A. transport
- B. data link
- C. session
- D. presentation
Answer: A
NEW QUESTION 2
Which type of cable do you use with a Cisco QSEP 40-Gbps BiDi transceiver?
- A. MMF
- B. active twinax
- C. STP
- D. SMF
Answer: A
NEW QUESTION 3
When connecting a switch port to a virtualization host requiring 802.1q VLAN tagging, which spanning-tree port type should be configured on the switch?
- A. normal
- B. edge
- C. edge trunk
- D. PortFast
- E. trunk
Answer: C
NEW QUESTION 4
Refer to the exhibit.
How does the switch process the Ethernet frame?
- A. drop the frame
- B. Forwards the frame to port3
- C. filter the frame
- D. floods the frame
Answer: B
NEW QUESTION 5
A network engineer is verifying Layer 2 connectivity of a server to a Cisco Nexus switch by checking the Address Resolution table statistics. Which command shows the MAC address, physical interfaced, VLAN and IP address of a server on a Cisco Nexus switch?
- A. show Ip arp interface
- B. show Ip arp
- C. show Ip arp detail
- D. show arp detail
Answer: C
NEW QUESTION 6
Which command should be used to determine which hosts are Fibre Channel targets?
- A. MDS-A# show host database
- B. MDS-A# show flogi database
- C. MDS-A# show fens database
- D. MDS-A# show host-id
Answer: B
NEW QUESTION 7
Which two layers of the OSI model relate to the transmission of bits over the wire and packet forwarding based on destination IP address? (Choose two.)
- A. 1
- B. 2
- C. 3
- D. 4
- E. 5
Answer: AC
Explanation: Bits - 1 layer Packets - 3 layer
http://en.wikipedia.org/wiki/OSI_model
NEW QUESTION 8
Which statement about SAN zooming is true?
- A. Describes can belong to more than one zone.
- B. zones must be the same size.
- C. zone membership can be configured only on a pWWN basis.
- D. Hard zoning can be disabled
Answer: A
NEW QUESTION 9
Which field in an Ethernet II frame performs the same function as the DSAP field in an 802.3 Ethernet frame?
- A. Start of frame
- B. EtherType
- C. Frame check sequence
- D. Subnetwork Access Protocol
- E. Logical Link Control
Answer: B
NEW QUESTION 10
How is TIP defined?
- A. TIP allows communication between any immersive and non-immersive endpoint.
- B. TIP multiple RTP ports to reduce the number of video streams required in call between immersive endpoints.
- C. TIP multiple RTP ports to reduce the number of video streams required in calls between any H.323 and SIP endpoint, whether they are immersive endpoints or non-immersive endpoints.
- D. TIP allows communication between any endpoint, regardless of what protocol is used.
Answer: B
NEW QUESTION 11
Drag and drop the feature on the left to the correct description on the right.
Answer:
Explanation: Authorization = Provide access control and verifies whether the connected user can execute a submitted
command.
Authentication = The process of verifying the identity of the person or device accessing the resource. Accounting = Provides a method to collect and log information, and send the information to the AAA server
for billing, auditing, and reporting
RBAC = A method of restricting or authorization system access for users based on user roles and locales.
NEW QUESTION 12
Which two options describe Junctions of the data center aggregation layer? (Choose two)
- A. services layer
- B. high-speed packet switching O repeater
- C. access control
- D. QoS marking
Answer: AC
NEW QUESTION 13
When you enter the feature npv command on a storage-capable switch from Cisco, what is the result?
- A. N-Port Virtualization is enabled without rebooting.
- B. The switch reloads and erases the current configuration before it enables the feature N-Port ID Virtualization.
- C. The switch reloads and erases the current configuration before it enables the feature N-Port Virtualization.
- D. N-Port ID Virtualization is enabled without rebooting.
Answer: C
NEW QUESTION 14
What is a unique feature of Expressway?
- A. Persistent content available to room participants.
- B. Message, meet and calling for cloud-based solutions.
- C. Advanced video routing on video-only networks.
- D. Support of unified communications with contact center
Answer: C
NEW QUESTION 15
What are two features of a bridge? (Choose two.)
- A. Reliable transmission
- B. Operate at OSI Layer 2
- C. Operate at OSI Layer 3
- D. Create multiple broadcast domains
- E. Create multiple collision domains
- F. Flood input packets to all ports
- G. Drop IP packets with invalid destination ports
Answer: BE
Explanation: "- a bridge is a two interfaces device that creates 2 collision domains, since it forwards the traffic it receives from one interface only to the interface where the destination layer 2 device (based on his mac address) is connected to. A bridge is considered as an "intelligent hub" since it reads the destination mac address in order to forward the traffic only to the interface where it is connected"
https://learningnetwork.cisco.com/thread/1734
NEW QUESTION 16
Which premise-based conferencing solution works with Conductor, TMS and WebEx to create CMR Hybrid solutions?
- A. MSE8000
- B. Cisco Meeting Server
- C. Spark
- D. TelePresence Server
Answer: B
NEW QUESTION 17
What is the only WebEx product that can used in a CMR Cloud solution?
- A. Cisco WebEx Support Center
- B. Cisco WebEx Training Center
- C. Cisco WebEx Meeting Center
- D. Cisco WebEx Event Center
Answer: C
NEW QUESTION 18
Drag and drop the protocols on the left to the correct storage types for which they are used on the right.
Answer:
Explanation: File Storage CIFS
ISCSI
Block Storage Fibre Channel NFS
NEW QUESTION 19
When command set will create an access control 1st on a Cisco Nexus switch to permit only unencrypted Web traffic from any source to destination host 10.10.1.110?
- A. N5K-A(config)#access-list 101 permit tcp any host 10.10.1.110 eq 80
- B. N5K-A(config)# Ip access-list 101N5K-A(config-acl)# permit tcp any host 10.10.1.110 eq 80 N5K-A(config-acl)# permit Ip any any
- C. N5K-A(config)#Ip access-list 101N5K-A(config-acl)# permit tcp any host 10.10.110 eq 80
- D. N5K-A(config)#Ip access-list 101 permit tcp any host 10.10.1.100 eq 80 N5K-A(config)#Ip access-list 101 deny ip any any
Answer: C
100% Valid and Newest Version 200-150 Questions & Answers shared by Certleader, Get Full Dumps HERE: https://www.certleader.com/200-150-dumps.html (New 177 Q&As)