200-355 | What Realistic 200-355 exam question Is?
P.S. Printable 200-355 preparation exams are available on Google Drive, GET MORE: https://drive.google.com/open?id=1K_5D8ttuOQQ1eiQAN2BmiV98Cm613fIz
New Cisco 200-355 Exam Dumps Collection (Question 13 - Question 22)
New Questions 13
An engineer is deploying an autonomous AP, and the customer requests that all IEEE 802.11b data rates be disabled on the AP. Which interface must be amended to disable the 802.11b data rates on a Cisco Aironet 1252 Series Access Point?
A. Dot11radio0
B. Dot11radio1
C. GigabitEthernet0
D. BVI1
Answer: A
New Questions 14
A customer wants to analyze the data rates that are available to a corporate laptop in its wireless deployment. The customer wants a heat map that displays actual data and shows the data rates that are available to the client in different areas of its facility. When using AirMagnet Survey PRO, which type of survey provides the actual data rates?
A. virtual
B. predictive
C. passive
D. active
Answer: D
New Questions 15
Which architecture is used to divide the roles between the access point and the WLC when deploying a centralized wireless solution?
A. Split MAC
B. CAPWAP
C. LWAPP
D. Local MAC
Answer: A
New Questions 16
Which description of the procedure for a lightweight AP to successfully establish a connection to a controller is true?
A. The AP sends its certificate to the RADIUS server. The AP then authenticates the controller certificate as valid.
B. The AP sends its certificate to the RADIUS server. The AP then authenticates the RADIUS certificate as valid.
C. The AP authenticates the received Cisco WLC certificate as valid. The AP then sends its certificate to the controller.
D. The AP sends its certificate to the controller. The AP then authenticates the received Cisco WLC certificate as valid.
Answer: D
New Questions 17
Refer to the exhibit.
Which GUI item do you click to configure authentication and authorization in Cisco WCS?
A. Security
B. Monitor
C. Configure
D. Services
E. Administration
F. Tools
Answer: E
New Questions 18
Which three configuration elements must match for a client to successfully associate to a standalone AP? (Choose three.)
A. BVI subnet
B. PSK
C. AP name
D. SSID
E. encryption method
F. gateway IP
Answer: B,D,E
New Questions 19
Refer to the exhibit.
Which tab is used to set up web authentication for guest users?
A. Security > Layer 3
B. Security > Layer 2
C. Security > AAA Servers
D. Advanced
E. General
Answer: A
New Questions 20
Which two actions would you use to begin to troubleshoot an access point that fails to join a wireless LAN controller successfully? (Choose two.)
A. SSH to the AP.
B. SSH to the Cisco WCS.
C. SSH to the Cisco WLC.
D. Issue the Cisco WLC command debug capwap events enable
E. Issue the Cisco WLC command show capwap events
Answer: C,D
New Questions 21
Refer to the exhibit. During deployment of a WLC on a customer site, the GUI log displayed this error message. What could be causing this error?
A. An access point has been assigned to an AP group that has reached maximum capacity.
B. An access point has been assigned to an AP group that has been deleted.
C. An access point has been removed from an AP group and assigned to a FlexConnect AP group.
D. An access point has been removed from an AP group and assigned to the default AP
group.
Answer: B
New Questions 22
When reading a radiation pattern for an antenna, at which two drops in signal and power is the beamwidth measured? (Choose two.)
A. 3 dB
B. 6 dB
C. 9 dB
D. 10 dB
E. 1/2 power
F. 1/4 power
G. 1/8 power
H. 1/10 power
Answer: A,E
P.S. Easily pass 200-355 Exam with Dumpscollection Printable Dumps & pdf vce, Try Free: http://www.dumpscollection.net/dumps/200-355/ (433 New Questions)