300-075 | The Up to the minute Guide To 300-075 vce

Q1. With Cisco Extension Mobility, when a user logs in to a phone type which has no user device profile, what will happen to the phone?

A. The phone takes on the default clusterwide device profile.

B. The phone creates a new device profile automatically.

C. The phone immediately logs the user off.

D. The phone crashes and reboots.

Answer: A

Q2. Refer to the exhibit.

When the user of a phone registered to the Cisco Unified Communications Manager places a call to 3001 when the SAF network is down, what happens?

A. The call fails.

B. The call is rerouted to the PSTN with the constructed PSTN number as +442288223001

C. The call is rerouted to the PSTN with the constructed PSTN number as 442288223001

D. The call is rerouted to the PSTN with the constructed PSTN number as 0002288223001

E. The call is rerouted to the PSTN with the constructed PSTN number as

+0002288223001

Answer: A

Explanation: Incorrect: BCD

When the SAF forwarder loses network connection with its call-control entity, the SAF forwarder withdraws those learned patterns that were published by the call control entity. In this case, CCD requesting service marks those learned patterns as unreachable via IP, and the calls gets routed through the PSTN gateway.

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fscallcontrol discovery.html

Q3. A Cisco Unified Communications Manager cluster is installed in headquarters only.

How can international calls be blocked while national calls are allowed for branch office Cisco IP Phones during a WAN failure?

A. Configure CSS and partitions in Cisco Unified Communications Manager and apply the CSS and partitions to the SRST ISR.

B. Configure CSS and partitions in the SRST ISR.

C. Configure COR in the SRST ISR.

D. Configure voice translations in the SRST ISR.

Answer: C

Q4. This is the configuration on the voice gateway:

telephony-service max-ephones 30

max-dn 60 preference 0 srst mode auto-provision all srst dn line-mode dual

srst dn template 3

srst ephone description srst fallback auto-provision phone srst ephone template 5

Which ephone-dn would be expected upon activation of SRST?

A. ephone-dn 1 dual-line number 7001

description 7001

name 7001

ephone-dn-template 5

This DN is learned from srst fallback ephones

B. ephone-dn 1 dual-line number 7001

description 7001

name 7001

ephone-dn-template 3

This DN is learned from srst fallback ephones

C. ephone-dn 1

number 7001

description 7001

name 7001

ephone-dn-template 5

This DN is learned from srst fallback ephones

D. ephone-dn 1

number 7001

description 7001

name 7001

ephone-dn-template 3

This DN is learned from srst fallback ephones

Answer: A

Q5. Refer to the exhibit.

How does the Cisco Unified Communications Manager advertise dn-block 2?

A. 14087071222 with number type international

B. +14087071222 with number type international

C. +14087071222

D. 14087071222

Answer: C

Q6. Which Cisco IOS command is used for internal SAF Clients to check SAF learned routes?

A. show eigrp address-family ipv4 saf

B. show voice saf routes

C. show voice saf detail

D. show eigrp service-family ipv4 saf

E. show voice saf dndb all

Answer: E

Explanation: Incorrect: ABCD Router# show voice saf dnDb all

Total no. of patterns in db/max allowed : 1/6000 Patterns classified under dialplans (private/global) : 0/1 Informational/Error stats -

Patterns w/ invalid expr detected while add : 0 Patterns duplicated under the same instance : 0 Patterns rejected overall due to max capacity : 0 Attempts to delete a pattern which is invalid : 0

Last successful DB update @ 2009:12:14 15:42:45:967 Link:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/feature/guide/SAF_FeatureModul e.html#wp1202115

Q7. While operating in SRST, what is needed to route calls outside of the remote site location to the PSTN?

A. SIP trunk

B. CallManager route patterns

C. translation patterns

D. POTS dial peers

E. VOIP dial peers

Answer: D

Explanation: Incorrect: ABCE

in time of srst configuration on router, please configure a dial-peer so that call flow in SRST mode.

Link:

Q8. When an incoming PSTN call arrives at an H.323 gateway, how does the called number

get normalized to an internal directory number in Cisco Unified Communications Manager?

A. Normalization is done by configuring the significant digits for inbound calls on the H.323 gateway configuration in Cisco Unified Communications Manager.

B. Normalization is done using route patterns.

C. Normalization is done using the gateway incoming calling party prefixes based on number type.

D. Normalization is achieved by local route group that is assigned to the H.323 gateway.

Answer: A

Q9. When Cisco Extension Mobility is implemented, which CSS is used for calling privileges?

A. The user device profile line CSS combined with the device CSS of the physical phone used to log in the extension mobility user.

B. The user device profile device CSS combined with the line CSS of the physical phone used to log in the extension mobility user.

C. Only the user device profile device CSS is used.

D. The combined line/device CSS of the physical phone is used to log in the extension mobility user.

E. The combined line/device CSS of the user device profile.

Answer: A

Q10. You are entering the description for the Service Advertisement Framework forwarder. Which three characters should you avoid entering in the description? (Choose three.)

A. < >

B. &

C. %

D. #

E. $

F. @

Answer: A,B,C