300-075 | Validated CCNP Collaboration 300-075 exam question

Question No: 1

Scenario:

There are two call control systems in this item.

The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone.

The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.

DP:

Locations:

CSS:

Movie Failure:

Movie Settings:

CIPTV2 Topology:

Subzone:

Links:

Pipe:

Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can't make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure?

A. Wrong username and/or password.

B. Wrong SIP domain name.

C. The TMSPE is not working.

D. The bandwidth is incorrectly configured.

Answer: D

Question No: 2

Which commands are needed to configure Cisco Unified Communications Manager Express in SRST mode?

A. telephony-service and srst mode

B. telephony-service and moh

C. call-manager-fallback and srst mode

D. call-manager-fallback and voice-translation

Answer: A

Question No: 3

An administrator is setting up analog phones that connect to a Cisco VG310. Which type of gateway or trunk on Cisco Unified Communication Manager for the Cisco VG310 must the administrator set up to allow the phones to have the call pickup feature?

A. H.323 gateway

B. SCCP gateway

C. H.225 trunk

D. MGCP gateway

E. SIP trunk

Answer: B

Explanation: http://www.cisco.com/c/en/us/products/collateral/unified-communications/vg-seriesgateways/product_data_sheet09186a00801d87f6.html

Question No: 4

Which gateway does the Cisco Unified Communications Manager control all call activity?

A. SIP

B. MGCP

C. H.323

D. Media

Answer: B

Question No: 5

Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?

A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.

B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.

C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.

D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.

Answer: A

Question No: 6

Company X wants to implement RSVP-based Call Admission Control and move away from the current location-based configuration.

Where does the administrator go to create a default profile?

A. System > Call Manager > Clusterwide > Service Parameters > RSVP

B. System > Service Parameters > RSVP

C. System > Service Parameters > Call Manager > Clusterwide parameters > RSVP

D. on each MGCP gateway at all remote locations

Answer: C

Question No: 7

How long is the default keepalive period for SRST in Cisco IOS?

A. 45 sec

B. 30 sec

C. 60 sec

D. 120 sec

Answer: B

Question No: 8

Which feature allows you to specify which endpoints ring when someone calls a user on a specific destination ID?

A. FindME

B. Extension Mobility

C. Speech Connect

D. Single Number Reach

Answer: A

Question No: 9

Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones?

(Choose three.)

A. Configure voice register pool.

B. Configure voice register global dn.

C. Configure an SRST reference.

D. Configure a phone NTP reference.

E. Configure the SIP registrar.

F. Configure telephony service.

Answer: A,B,C

Question No: 10

Scenario:

There are two call control systems in this item.

The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.

The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.

SX20 System information:

DX650 Configuration:

MRGL:

DP:

Locations:

AARG:

CSS:

Movi Failure:

Movie Settings:

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two)

A. Incorrect username and password.

B. Wrong SIP domain configured.

C. User is not associated with the device.

D. IP or DNS name resolution issue.

E. CSF Device is not registered.

F. IP Phone DN not associated with the user.

Answer: B,D