300-085 | Cisco 300-085 Dump 2021

NEW QUESTION 1
The Cisco Unity Connection Serviceability menu provides which two troubleshooting functionalities? (Choose two.)

• A. viewing the status of the Cisco Unity Connection feature service
• B. generating reports that you can view in a range of formats, such as PDF, CSV, or HTML
• C. viewing trace information through the web browser
• D. providing an interface for the "starting and stopping" feature and network services
• E. monitoring the number of threads and processes that are in the system

Answer: AB

NEW QUESTION 2
Which protocol does Cisco Unified IM and Presence use to exchange phone presence information with Cisco Unified Communications Manager?

• A. XMPP
• B. CTI-QBE
• C. SIP
• D. WebDAV
• E. HTTPS
• F. IMPP

Answer: C

NEW QUESTION 3
Which statement is true about an endpoint that does not support secure signaling when connecting to a secure multisite conference scheduled through Cisco TMS?

• A. All participants connecting to the conference are notified
• B. The endpoint is not allowed to connect.
• C. The endpoint connects with a default security profile
• D. If all legs of the conference are secure, the endpoint connects

Answer: A

NEW QUESTION 4
Which two protocols allow Cisco TMS to manage an EX60 endpoint? (Choose two.)

• A. H.323
• B. SNMP
• C. SMTP
• D. SIP
• E. HTTP/HTTPS
• F. RTCP

Answer: BE

NEW QUESTION 5
In which two scenarios would a caller who is calling into the Cisco Unity Connection general pilot number hear the opening greeting of the voice-mail system and be prompted for a user ID and PIN? (Choose two.)

• A. non-subscriber
• B. subscriber who sends the calling number
• C. subscriber who does not send the calling number
• D. A SIP phone user will always be prompted for a user ID and PIN.
• E. An SCCP phone user will always be prompted for a user ID and PIN.
• F. The scenario is invalid.

Answer: AC

NEW QUESTION 6
Which device needs to be configured to allow Cisco Unified Presence to receive phone availability updates from subscribed users?

• A. H.323 Trunk
• B. Presence Gateway
• C. MGCP Gateway
• D. SIP Cisco Unified Personal Communicator Gateway
• E. CTI Gateway

Answer: B

NEW QUESTION 7
When troubleshooting a single Cisco Unified Presence user complaint, which is the Cisco recommended tool to start the troubleshooting process?

• A. Cisco Unified Real Time Monitoring Tool
• B. Cisco Unified Presence System Troubleshooter
• C. Cisco Unified Presence Monitoring Tool
• D. Cisco Unified Presence Viewer

Answer: D

NEW QUESTION 8
An organization wants to integrate its Cisco Unified IM and Presence Server with Microsoft Lync for Remote Call Control. Which protocol standard does the integration use?

• A. SAMLSSO
• B. XMPP
• C. LDAP
• D. JTAPI
• E. SIP/SIMPLE
• F. AXL

Answer: E

NEW QUESTION 9
Which two appear under the System Settings section of Cisco Unity Connection? (Choose two.)

• A. telephony integration
• B. licenses
• C. interview handlers
• D. bulk administration tool
• E. service parameters

Answer: BE

NEW QUESTION 10
Before adding users to TMSPE, where does an engineer set up a group hierarchy in Cisco TMS?

• A. Administrative Tools > Configuration
• B. System > Provisioning > Devices
• C. System > Provisioning > Users
• D. System > Provisioning > FindMe

Answer: C

NEW QUESTION 11
A company is in the process of deploying mobile and remote access with multiple IM&P clusters and must ensure that the user DB replicates among clusters and the Expressway-C correctly routes XMPP traffic. Which service must the engineering team turn on to accomplish this goal?

• A. Cisco Discovery Protocol Agent
• B. Host Resources Agent
• C. MB2 Agent
• D. Intercluster Sync Agent

Answer: D

NEW QUESTION 12
What is the next logical step in troubleshooting Cisco Unified Presence and Cisco Unified Personal Communicator in a live production environment if the Cisco Unified Presence System Troubleshooter and Server Health Tools do not help resolve the issue?

• A. Restart the Cisco Unified Presence server.
• B. Restart Cisco Unified Communications Manager.
• C. Enable tracing and use Cisco Unified RTMT to review the traces.
• D. Uninstall and re-install Cisco Unified Personal Communicator.
• E. Reset the Presence Gateway.

Answer: C

NEW QUESTION 13
Which two rules are the direct rules in Cisco Unity Connection? (Choose two.)

• A. Attempt Sign-in
• B. Opening Greeting
• C. Attempt Forward
• D. Attempt Sign-out
• E. Attempt Send
• F. Closing Greeting

Answer: AB

NEW QUESTION 14
When configuring mobile and remote access on Cisco VCS Control, what are two required configuration steps? (Choose two.)

• A. Ensure that provisioning is enabled
• B. Ensure that all Cisco VCS systems are synchronized to a reliable NTP service
• C. Ensure that the system host name and domain name are specified
• D. Ensure that local DHCP servers are specified.
• E. Set Unified Communications mode to peer-to-peer.

Answer: BC

NEW QUESTION 15
Refer to the exhibit.

Which application is illustrated in the exhibit?

• A. Call Handler
• B. Interview Handler
• C. Audiotext Application Manager
• D. Audio Text Manager
• E. Job Handler

Answer: D

NEW QUESTION 16
Refer to the exhibit.

Which six of the following commands are required to configure a dial peer that will allow voice-mail messages to be left on Cisco Unity Express for Unified Communications Manager Express users? The Cisco Unity Express module uses a pilot number of 4100. (Choose six.)

• A. destination-pattern 4100
• B. no vad
• C. session target ipv4:10.1.131.2
• D. codec transparent
• E. dial-peer voice 4100 pots
• F. codec g711ulaw
• G. session target ipv4:10.1.131.1
• H. dial-peer voice 4100 voip
• I. dtmf-relay sip-notify
• J. dtmf-relay h245-alphanumeric

Answer: ABCFHI

NEW QUESTION 17
Cisco Unified Communications Manager is being integrated with Cisco Unity Connection using SCCP. What should the Device Name Prefix be on the Cisco Unity Connection server if the Cisco Unified Communications Manager voice mail server ports are configured using the name CiscoUM1?

• A. CiscoUM1
• B. CUCM
• C. CUCM-1
• D. CiscoUM1-VI
• E. CUCM-V1
• F. CiscoUM1-V1

Answer: D

NEW QUESTION 18
What is an extension of the Cisco TMS legacy calendar option that is used for conferencing?

• A. Cisco VCS-E
• B. Cisco VCS-C
• C. Cisco TMSBA
• D. Cisco TMSXE

Answer: C

NEW QUESTION 19
After the initial Cisco Unity Connection installation, how and where can the time zone be changed?

• A. The Cisco Unity Connection time zone can be changed from the Cisco Unified Operating System Administration GUI.
• B. The Cisco Unity Connection time zone can be changed from the Cisco Unified Communications Manager GUI.
• C. The Cisco Unity Connection time zone can be changed from the Cisco Unified Operating System CLI.
• D. The Cisco Unity Connection time zone can be changed from the Cisco Unity Connection CLI.
• E. The Cisco Unity Connection time zone cannot be changed after the initial installatio
• F. A reinstallation is required.

Answer: D

NEW QUESTION 20
In Cisco Unified Communications Manager, which two UC Service Types under UC Service Configuration are valid? (Choose two)

• A. Phone Control
• B. MailStore
• C. AXL
• D. Mailbox
• E. CTI

Answer: BE

NEW QUESTION 21
In Cisco Unity Connection, which two methods can you use to segregate the global dial and message addressing space? (Choose two.)

• A. SIP trunk
• B. search spaces
• C. route patterns
• D. translation patterns
• E. partitions
• F. hunt pilot

Answer: BE

NEW QUESTION 22
Under System Settings in Cisco Unity Connection, where do you assign the cluster ID?

• A. general configuration
• B. cluster
• C. enterprise parameters
• D. service parameters
• E. licenses
• F. schedules
• G. roles
• H. authentication rules

Answer: C

NEW QUESTION 23
A user that is logged into Cisco Jabber reports that their availability status is incorrect for most of the contacts in their contact list. Which four service traces give a correct indication of the issue? (Choose four.)

• A. Cisco XCP Connection Manager
• B. Cisco XCP Router
• C. Cisco Presence Engine
• D. Cisco SIP Proxy
• E. Cisco Text Conferencing Manager
• F. Cisco Client Profile Agent
• G. Cisco XCP Web Connection Manager

Answer: ABCE

NEW QUESTION 24
Which two types of mailboxes are supported by Cisco Unity Express? (Choose two.)

• A. personal
• B. general delivery
• C. group
• D. mailing list
• E. voice
• F. temporary

Answer: AB

NEW QUESTION 25
Which tool is used to migrate users from Cisco Unity to Cisco Unity Connection?

• A. CSV import
• B. LDAP import
• C. Exchange Synch import
• D. COBRAS import
• E. Cisco Unity Migration Assistant

Answer: D

NEW QUESTION 26
Which set is a list of valid functions in Cisco TelePresence Management Suite?

• A. registration, reporting, provisioning, and remote control
• B. reporting, registration, provisioning, and asset management
• C. provisioning, reporting, asset management, and call control
• D. call control, asset management, reporting, and registration
• E. reporting and phonebook

Answer: E

NEW QUESTION 27
Which two methods can be used to create multiple users in Cisco Unity Connection? (Choose two.)

• A. importing users from LDAP
• B. importing users from Cisco Unified Communications Manager
• C. creating users from Cisco Unity Express
• D. creating users from Cisco Presence Server

Answer: AB

NEW QUESTION 28
Which two steps are required when configuring Cisco Unified Communications Manager in the Cisco Unity Express administration menu? (Choose two.)

• A. Select the IP addresses or hostnames of the Cisco Unified Communications Manager servers.
• B. Select the JTAPI username and password.
• C. Select the AXL username and password.
• D. Select the web username and password.
• E. Select the keepalive timers for Cisco Unified Communications Manager polling.

Answer: AB

NEW QUESTION 29
You are importing users into Cisco Unity Connection from Cisco Unified Communications Manager. You notice that several user accounts do not appear on the list after you select the Import Users process. Which situation can cause this issue?

• A. The users are not members of any groups.
• B. The extension in the telephone number field is missing.
• C. The primary extension is not selected.
• D. The users have multiple controlled devices.

Answer: C

NEW QUESTION 30
Which two are required when enabling BFCP with Cisco VCS? (Choose two.)

• A. TLS connectivity between VCS and Cisco Unified CM
• B. SIP UDP/BCF filter mode set to On
• C. a custom BFCP enabled SIP profile configured in Cisco Unified CM
• D. VCS Load Balancing
• E. VCS Zone

Answer: CE

NEW QUESTION 31
......