300-165 | Cisco 300-165 Free Practice Questions 2021

are updated and are verified by experts. Once you have completely prepared with our you will be ready for the real 300-165 exam without a problem. We have . PASSED First attempt! Here What I Did.

Free 300-165 Demo Online For Microsoft Certifitcation:

NEW QUESTION 1
In OTV, how are the VLANs split when a site has two edge devices?

  • A. They are configured manually by user.
  • B. They are split in half among each edge device.
  • C. They are split as odd and even VLAN IDs on each edge device.
  • D. It is not possible to have two edge devices in same sit

Answer: C

NEW QUESTION 2
Which two options accurately describe the implementation of Fibre Channel domain IDs? (Choose two.)

  • A. are assigned on a per-line card basis
  • B. must be unique on all of the Fibre Channel switches in the fabric
  • C. are assigned on a per switch basis
  • D. are assigned on a per-VSAN basis
  • E. must be the same on all of the Fibre Channel switches in the fabric

Answer: BC

NEW QUESTION 3
Refer to the exhibit. What is the result of the configuration?
300-165 dumps exhibit

  • A. A MAC address of 11c0.adaa.3213 is denied.
  • B. The MAC ACL is applied to VLANs 10-120.
  • C. The MAC ACL denies a MAC address of 1122.2847.4591 on VLAN 101.
  • D. A MAC address of 11c0.adaa.3213 is permitte

Answer: D

NEW QUESTION 4
On a Cisco Nexus7000 switches what is true regarding Cisco FabricPath requirements?
300-165 dumps exhibit
300-165 dumps exhibit
300-165 dumps exhibit
300-165 dumps exhibit

  • A. Ensure that you have installed the Enhanced Layer 2 license and that you have installed an F Series module
  • B. Ensure that you have installed the Enhanced Layer 2 license and that you have installed an M Series module
  • C. Ensure that you have installed the Enhanced Layer 3 license and that you have installed an M Series module
  • D. Ensure that you have installed the Scalable Feature License license and that you have installed an F Series module

Answer: A

Explanation: FabricPath switching has the following prerequisites:
• You should have a working knowledge of Classical Ethernet Layer 2 functioning.
• You must install the FabricPath feature set on the default and nondefault VDC before you enable FabricPath on the switch. See Configuring Feature Set for FabricPath for information on installing the FabricPath feature set.
• You are logged onto the device.
• Ensure that you have installed the Enhanced Layer 2 license.
• You are in the correct virtual device context (VDC). A VDC is a logical representation of a set of system resources. You can use the switchto vdc command with a VDC number.
• You are working on the F Series module. Reference:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nxos/ fabricpath/configuration/guide/fp_switching.html

NEW QUESTION 5
When a local RBAC user account has the same name as a remote user account on an AAA server, what happens when a user with that name logs into a Cisco Nexus switch?

  • A. The user roles from the remote AAA user account are applied, not the configured local user roles.
  • B. All the roles are merged (logical OR).
  • C. The user roles from the local user account are applied, not the remote AAA user roles.
  • D. Only the roles that are defined on both accounts are merged (logical AND).

Answer: C

Explanation: If you have a user account configured on the local Cisco NX-OS device that has the same name as a remote user account on an AAA server, the Cisco NX-OS software applies the user roles for the local user account to the remote user, not the user roles configured on the AAA server.
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nxos/ security/configuration/guide/sec_nx-os-cfg/sec_rbac.html

NEW QUESTION 6
Which three selections represent implementations of Cisco VN-Link technology? (Choose three.)

  • A. Cisco Nexus 1000V
  • B. Cisco Nexus 2000 FEX
  • C. Cisco VM-FEX
  • D. VMware PTS
  • E. vMotion

Answer: ACD

Explanation: The VM is powered on and resides on the ESX Host 1 with all the information stored on the shared storage.
The VM was connected to the PODy (where y is the number of your POD) PTS VDS by associating it to port group VLAN61 that was created on the Cisco Nexus 5548 device. The VM has been connected to the vPC system automatically using a VN-Link in the hardware in PTS mode or in VM-FEX mode.
The VEM bits are used in PTS mode to connect the VM VNIC to the VMNIC interface.
In this case, the VMNIC interface is not a real VMNIC but a dynamic VNIC that is presented as an interface to the ESX OS. The dynamic VNIC is enabled when the Cisco UCS VIC creates and configures the VNIC parameters inherited from port group VLAN61.
Reference: http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mkt_ops_guides/513_n1_1
/n5k_ops_vmfex.html

NEW QUESTION 7
Which statement accurately describes an EPLD upgrade on supervisor modules?

  • A. It is disruptive in dual supervisor configurations.
  • B. It is disruptive in single supervisor configurations.
  • C. It can be performed during an ISSU.
  • D. It requires an NX-OS image upgrad

Answer: B

NEW QUESTION 8
Refer to the exhibit.
300-165 dumps exhibit
Which statement about the NetFlow implementation is true?

  • A. It samples inbound IPv6 traffic on Ethernet 2/1
  • B. It uses TCP for data export.
  • C. It samples outbound traffic on Ethernet 2/1
  • D. It samples inbound traffic on Ethernet 2/1

Answer: D

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fnetflow/configuration/15-mt/fnf-15-mtbook/use-fnflow-redce-cpu.html

NEW QUESTION 9
Which feature does a vFC interface support?

  • A. port tracking
  • B. F Port mode
  • C. SAN port channels
  • D. buffer-to-buffer credits

Answer: B

NEW QUESTION 10
Which example creates an Embedded Event Manager policy allowing the CLI command to execute,
and triggers an SNMP notification when a user enters configuration mode?
A)
300-165 dumps exhibit
B)
300-165 dumps exhibit
C)
300-165 dumps exhibit
D)
300-165 dumps exhibit

  • A. Option A
  • B. Option B
  • C. Option C
  • D. Option D

Answer: A

NEW QUESTION 11
Which feature enables NIV?

  • A. EHV
  • B. vPC
  • C. Cisco FabricPath
  • D. Cisco OTV
  • E. VN-Tag

Answer: A

Explanation: EHV is the feature that enables NIV.

NEW QUESTION 12
Which two options can be used for link aggregation when you configure vPC member interfaces? (Choose two.)

  • A. a static EtherChannel
  • B. the Cisco Fabric Services protocol
  • C. the LACP protocol
  • D. the VSL control link
  • E. the PAgP protocol

Answer: AC

NEW QUESTION 13
Which two Nexus family line cards allow the configuration of features regarding LISP, OTV and MPLS? (Choose two.)

  • A. B1
  • B. F3
  • C. F2
  • D. F1
  • E. M2

Answer: BE

NEW QUESTION 14
Refer to the exhibit,
300-165 dumps exhibit
Which description of the output is true?

  • A. The default map-cache limit is used.
  • B. PETR is disable
  • C. The table output apply to the default VRF
  • D. The switch acts as an IPv4 LISP ETR

Answer: A

NEW QUESTION 15
Refer to the exhibit.
300-165 dumps exhibit
How does Switch 1 route traffic to the Level 2 network?

  • A. Switch 1 prefers Switch 2 as the path to the Level 2 network.
  • B. Switch 1 load balances traffic destined for Level 2 between Switch 2 and Switch.
  • C. Switch 1 sends 75 percent of the traffic destined for Level 2 to Switch 3 and 25 percent to Switch 2.
  • D. Switch 1 prefers Switch 3 as the oath to the Level 2 networ

Answer: A

NEW QUESTION 16
Which item represents the process that allows FCoE multihop using T11 standard FC-BB-5?

  • A. distributed FCF
  • B. FIP proxy
  • C. N Port proxy
  • D. FIP snooping

Answer: D

Explanation: FIP snooping is used in multi-hop FCoE environments. FIP snooping is a frame inspection method that can be used by FIP snooping capable DCB devices to monitor FIP frames and apply policies based on the information in those frames. This allows for:
Enhanced FCoE security (Prevents FCoE MAC spoofing.) Creates FC point-to-point links within the Ethernet LAN
Allows auto-configuration of ACLs based on name server information read in the FIP frames Reference:
http://www.definethecloud.net/fcoe-initialization-protocol-fip-deep-dive/

NEW QUESTION 17
If vPC peer keepalives are used between vPC peers, which VRF is used by default?

  • A. management
  • B. default
  • C. The user must dedicate a VRF for keepalives.
  • D. system

Answer: A

NEW QUESTION 18
Which two statements are true when implementing fabric binding? (Choose two.)

  • A. The MAINFRAME_PKG or the ENTERPRISE_PKG license must be installed on a switch
  • B. Cisco fabric Services must be enabled on a switch to distribute configuration information
  • C. Activation must be performed globally
  • D. Activation must be performed globally on a switch
  • E. Activation must be performed on a per-VSAN basis

Answer: AE

Explanation: https://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080 5ecf5c.html

NEW QUESTION 19
Refer to the exhibit.
300-165 dumps exhibit
Which result does the configuration show?

  • A. border spine
  • B. tenant interface
  • C. SVI configuration
  • D. border leaf

Answer: D

Recommend!! Get the Full 300-165 dumps in VCE and PDF From Certshared, Welcome to Download: https://www.certshared.com/exam/300-165/ (New 286 Q&As Version)