300-170 | Top Quality 300-170 Answers 2021
It is more faster and easier to pass the Cisco 300-170 exam by using Highest Quality Cisco DCVAI Implementing Cisco Data Center Virtualization and Automation (DCVAI) questuins and answers. Immediate access to the Most up-to-date 300-170 Exam and find the same core area 300-170 questions with professionally verified answers, then PASS your exam with a high score now.
Online 300-170 free questions and answers of New Version:
NEW QUESTION 1
Drag and drop the Cisco ACI Layer 4 to Layer 7 service insertion on the left to the correct descriptions on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
Check below
C:UserswkDesktopmudassarUntitled.jpg
NEW QUESTION 2
Which description of the Visore tool is true?
- A. It reports the current managed object in the bottom left hand corner of the GUI windows.
- B. It is a tool within USC Director that allows the user to view the end point database.
- C. It is an object store that existing on the APIC which can directly query the managed objects.
- D. It is a tool used to report API calls that are made by the GUI to the APIC.
Answer: C
NEW QUESTION 3
When running Cisco NX-OS, which description of route leaking between VRFs is true?
- A. By default the maximum number of IP prefixes that can be imported from the default VRF to a non-default VRF is 500.
- B. Route leaking can be restricted to specific routes by using a VASI interface.
- C. Route leaking is supported only between the default VRF and a non-default VRF.
- D. VRF route leaking requires an Enterprise license.
Answer: D
NEW QUESTION 4
Which statement about POAP licensing correctly describes temporary licensing?
- A. Temporary licensing is invoked by using the license grace-period command
- B. Temporary licensing is enabled automatically and is valid for 60 days
- C. Temporary licensing is invoked by using the license Install command
- D. Temporary licensing is enabled automatically and is valid for 30 days
Answer: A
NEW QUESTION 5
Which protocol is used to communicate endpoint mapping information to the spine proxy?
- A. COOP
- B. LLDP
- C. OpFlex
- D. IS-IS
Answer: A
NEW QUESTION 6
You are deploying L4-L7 services within Cisco Application Centric Infrastructure You need to modify an existing service graph. Where do you configure this?
- A. under the provider EPG
- B. on a connector within a service graph
- C. on a function profile within a service graph
- D. on a terminal node within a service graph
Answer: A
Explanation:
http://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-734298.html
NEW QUESTION 7
When you perform a task in the Cisco APIC GUI, the GUI creates and sends internal API messages to the operating system to execute the task. Which Cisco tool enables you to view and copy these API messages?
- A. API Inspector
- B. syslog
- C. SNMP
- D. Postman
- E. SPAN
- F. EPG listener
Answer: A
NEW QUESTION 8
Refer to Exhibit.
In which bridge domain does enabling hardware proxy have the greatest benefit?
- A. BD1
- B. BD2
- C. BD3
- D. BD4
Answer: D
NEW QUESTION 9
To provide stronger authentication for Cisco UCS Manager, you are installing a third-party certificate from a trusted point. Which format must the certificate be in?
- A. DER
- B. PEM
- C. CRT
- D. CER (X.509)
Answer: D
NEW QUESTION 10
Why should you configure DHCP relay for Virtual Machine Manager integration?
- A. to create VTEP VMK interfaces on each host for the OpFlex control channel
- B. to provide IP addresses to ESXi hosts
- C. to provide IP addresses to virtual hosts through the VXLAN infrastructure
- D. to ensure that virtual hosts have the same address when they are moved by using VMware vMotion
Answer: B
NEW QUESTION 11
Refer to the exhibit.
Which action do you take to ensure that both endpoints are within the same subnet?
- A. Stitch the two VLANs by using an attachable entity profile.
- B. Normalize the encapsulation by using the Same bridge domain.
- C. Normalize the encapsulation by using the same VRF
- D. Stitch the two VL ANs by using an application network profile.
Answer: A
NEW QUESTION 12
Which feature allows firewall ACLs to be configure automatically when new endpoint are attached to an
EPG?
- A. ARP network gleaning
- B. network stitching
- C. dynamic endpoint attach
- D. hardware proxy
Answer: C
NEW QUESTION 13
Refer to the exhibit.
Which description of the state of the m-band management configuration is true?
- A. A contract named default is consumed by the m-band EPG.
- B. VLAN 10 is the m-band management VLAN.
- C. In-band management is functional.
- D. A bridge domain was not assigned.
Answer: B
NEW QUESTION 14
Which two features are supported for configuration synchronization? (Choose two )
- A. port profile
- B. GEM pre-provisioning
- C. configurations rollbacks
- D. feature sets
- E. FCoE
Answer: AB
Explanation:
http://www.cisco.com/c/en/us/td/docs/swit
ches/datacenter/nexus5000/sw/operations/n5k_config_sync_ops.html
NEW QUESTION 15
You plan to deploy Cisco ACI. You must provide the proper device package to integrate the Cisco APIC and the L4-L7 device of a vendor Where can you get the package?
- A. technical support of the vendor
- B. the APIC repository
- C. the Cisco ACI webpage
- D. Cisco TAC support
Answer: A
NEW QUESTION 16
You have a Cisco Nexus Series Switch. Which two descriptions of how incoming packets are handled by the VRF instance are true? (Choose two )
- A. The route policy defines which VRF that Cisco NX-OS uses for incoming packets
- B. By default, Cisco NX-OS uses the VRF of the outgoing interface
- C. The policy n the management VRF defines which VRF that Cisco NX-OS uses for incoming packets D By defaul
- D. Cisco NX-OS uses the VRF of the incoming interface
- E. The policy in the default VRF defines which VRF that Cisco NX-OS uses for incoming packets
Answer: BD
NEW QUESTION 17
You have an external switch that runs STP An interface connected to the switch generates a loop_ inc error Wh.ch feature do you enable on the Cisco ACI fabric to resolve the issue?
- A. LACP
- B. MSTP
- C. BPDU filter
- D. PortFast
Answer: C
NEW QUESTION 18
You have a Cisco UCS system. You need to create VSAN 100 on a Cisco MDS 9000 Series switch and to enable switch port fc 1/10 as a member for the VSAN. Which command set should you use?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION 19
You are configuration a group of web servers and you create a contract that uses TCP port 80. Which action allows an external Layer 3 cloud to initiate communication with the EPG that contains the web servers?
- A. Configure the EPG as a consumer and L3Out as provider of the contract
- B. Configure OSPF to exchange routes between the L3Out and EPG
- C. Create a taboo contract and apply it to the EPG
- D. Configure the EPG as a provider and L3Out as consumer of the contract.
Answer: D
NEW QUESTION 20
You have a contract between in-band and out-of-band EPGs. Which two descriptions of this contention are true? (Choose two )
- A. Filters apply m the incoming direction only
- B. Both EPGs must be m one VRF
- C. Management statistics are available
- D. Shared services for CPU-bound traffic are supported
- E. The configuration supports Layer 2
Answer: AB
NEW QUESTION 21
Which situation causes POAP to auto provision a switch?
- A. The startup configuration is corrupt.
- B. The switch is powered on after being offline for more than 48 hours.
- C. The startup configuration is missing.The startup configuration is corrupt, and you manually rebooted the switch
Answer: C
NEW QUESTION 22
Which action does a VEM on a Cisco Nexus 1000V Series Switch take when an untagged packet is received on an access port?
- A. It adds the ports access VLAN to the packet.
- B. It adds a native VLAN tag to the packet.
- C. It drops the packet.
- D. It forwards the packet as is.
Answer: A
NEW QUESTION 23
Refer to the exhibit.
You attempt to configure a local SPAN session on a Cisco Nexus 1000V Series Switch by using the vEthernet interface of VM1 as the source port and the vEthernet destination port.
Which description of what happens to the SPAN session is true?
- A. It can be successfully only logged to a file on VEM1.
- B. It secceeds.
- C. Both VMs must be on same VLAN for this work.
- D. It fails.
Answer: D
NEW QUESTION 24
......
100% Valid and Newest Version 300-170 Questions & Answers shared by Certshared, Get Full Dumps HERE: https://www.certshared.com/exam/300-170/ (New 154 Q&As)