300-175 | Cisco 300-175 Free Practice Questions 2021

Act now and download your today! Do not waste time for the worthless tutorials. Download with real questions and answers and begin to learn with a classic professional.

Online 300-175 free questions and answers of New Version:

NEW QUESTION 1
Which Cisco UCS firmware are contained in the Cisco UCS Infrastructure software bundle? (Choose three.)

  • A. Cisco UCS BIOS
  • B. Cisco UCS fabric interconnects firmware
  • C. Cisco UCS adapters
  • D. Cisco UCS Manager
  • E. Cisco I/O module firmware
  • F. Cisco IMC

Answer: BDE

NEW QUESTION 2
Which boot method would you use to boot the OS of a server by using a storage device located on an IP network?

  • A. CIMC secure boot
  • B. local disk boot
  • C. SAN boot
  • D. iSCSI boot

Answer: D

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Server-Mgmt/3-1

NEW QUESTION 3
300-175 dumps exhibit

    Answer:

    Explanation: 300-175 dumps exhibit

    NEW QUESTION 4
    Which of the following is true with respect to hardware failover or NIC teaming within a Cisco Unified Computing System?

    • A. Hardware failover is specified by the operating system.
    • B. An uplink failure when using automatic pinning requires that hardware failover for the server vNIC be disabled.
    • C. NIC teaming is controlled by the vNIC.
    • D. The hardware failover option that is available for Ethernet does not affect Fibre Channel traffic.

    Answer: D

    NEW QUESTION 5
    Which three components perform the port extension functions for a Cisco UCS domain? (Choose three.)

    • A. the multiprotocol port on the Cisco storage
    • B. the Device Manager in Cisco Prime Data Center Network Manager
    • C. the Cisco UCS 2208XP IOMs
    • D. the Cisco UCS Manager
    • E. the Cisco Nexus 2232PP FEX
    • F. the Cisco UCS VIC adapter that has VM-FEX and Adapter FEX technology

    Answer: ACD

    NEW QUESTION 6
    Which two statements describe effects of enabling a Cisco UCS Fabric Interconnect in Ethernet end-host mode? (Choose two.)

    • A. MAC address learning is disabled on the uplink ports of the fabric interconnect.
    • B. MAC address learning is enabled on the server ports of the fabric interconnect.
    • C. Server-to-server communication on the same VLAN is not performed locally via fabric interconnect, but requires an external switch.
    • D. By default, unicast traffic received by the fabric uplink port to unknown destination MAC addresses is forwarded to all of the server ports.
    • E. MAC address learning is disabled on all of the ports in Ethernet end-host mode.

    Answer: AB

    Explanation: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/whitepaper_c11 MAC address learning occurs only on the server ports; MAC address movement is fully supported.
    Server-to-server Layer 2 traffic is locally switched. In end-host mode, unknown unicast broadcasts are not flooded, switch mode is required. Additionally, because there is no MAC address learning on the uplink ports, the MAC address table can scale to support as many virtual machines as the number of entries available in the MAC address forwarding table.

    NEW QUESTION 7
    If there are four I/O module links from the Cisco Unified Computing System 5108 Blade Chassis to the Cisco Unified Computing System 6248UP Fabric Interconnect, which dynamic vNICs can be defined?

    • A. 9
    • B. 16
    • C. 24
    • D. 48
    • E. 54
    • F. 112

    Answer: E

    NEW QUESTION 8
    Which four physical connections on a fabric interconnect are needed to perform the initial system setup for a cluster configuration? (Choose four.)

    • A. Ethernet uplink ports connected to upstream switch
    • B. console port connected to a computer terminal or console server.
    • C. Layer 1 ports on both fabric interconnects connected to each other
    • D. Layer 1 port of the first fabric interconnect connected to Layer 2 port of the second fabric interconnect
    • E. Layer 2 ports on both fabric interconnects connected to each other
    • F. Fibre Channel uplink ports connected to upstream fabric switch
    • G. management Ethernet port (mgmt0) connected to external switch or router
    • H. port channel to each fabric interconnect

    Answer: BCEG

    NEW QUESTION 9
    Open the windows by clicking on the minimized at the bottom of the viewing area. Windows can be minimized by clicking on the [X], repositioned by dragging the title bar, and resized by using the handle at the lower right corner to customize the viewing area.
    If you are required to access the devices to complete this scenario, the mouse cursor will use a hand symbol when moved over device icons. Clicking the icon will open a device terminal so you can interact with the hardware.
    Open the Questions window and begin by clicking a question number. When you have completed answering all questions, click Done to continue.
    Scenario
    Use your UCS knowledge on Adapter errors ………………………………………configurations.
    300-175 dumps exhibit
    We are working on which Chassis ID?

    • A. 1
    • B. 2
    • C. 3
    • D. 4
    • E. 5

    Answer: A

    NEW QUESTION 10
    What is the purpose of the maximum ports that are filed in the port profile?

    • A. determines the maximum number of uplinks that VMs can use
    • B. determines the maximum number of VMs that can use the DVS
    • C. determines the maximum number of DVSs that can use the port profile
    • D. determines the maximum number of dynamic vNICS on the DVS

    Answer: D

    NEW QUESTION 11
    Which two statements describe the Cisco UCS Manager full state type of backup? (Choose two.)

    • A. The file created can be used for an import.
    • B. The file created cannot be used to restore the system during disaster recovery.
    • C. The file created can only be used to restore a system that is running the same version as the system from which the backup file was exported.
    • D. It creates an XML file.
    • E. It creates binary file.

    Answer: CE

    NEW QUESTION 12
    Which two options are valid modes for VM-FEX in a Cisco UCS Manager port profile? (Choose two.)

    • A. transparent
    • B. bypass
    • C. standard
    • D. advanced
    • E. high-performance
    • F. low-pass

    Answer: CE

    NEW QUESTION 13
    Cisco UCS Manager has deleted the VM object from its database, yet it still exists in vCenter. For which two reasons is the object removed from the Cisco UCS Manager database? (Choose two.)

    • A. The VM last passed traffic more than 5 minutes ago.
    • B. The VM is misconfigured.
    • C. The VM has been offline for more than 15 minutes.
    • D. vCenter is offline.
    • E. The VN link policy has been set for auto-deletion during a vMotion event.
    • F. The link between the fabric interconnect and IOM is offline.
    • G. The object was deleted in the Cisco UCS Manager, which also deletes it from vCenter.
    • H. The VM traffic is being sent to a SPAN

    Answer: CF

    NEW QUESTION 14
    Which three AAA protocols are supported for communication with external AAA providers? (Choose three.)

    • A. TACACS+
    • B. RADIUS
    • C. AD
    • D. LDAP
    • E. ACS
    • F. 802.1X

    Answer: ABD

    Explanation: Cisco UCS supports two methods to authenticate user logins: Through user accounts local to Cisco UCS Manager Remotely through one of the following protocols:
    LDAP RADIUS TACACS+
    Reference: https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration

    NEW QUESTION 15
    When using VM-FEX, the new VMs are not connected, but existing VMs are unaffected. Which option describes the most likely cause?

    • A. Binding is set to ephemeral on the DVS, but it must be set to static.
    • B. Dynamic NICs have been exhausted.
    • C. Hostd on the host has stopped responding to Cisco UCS Manager.
    • D. The adapter has failed.

    Answer: B

    NEW QUESTION 16
    Which two statements about service profile configuration option in the Cisco UCS Manager GUI are true? (Choose two.)

    • A. It can be configured by using the chassis connectivity policy.
    • B. it can be derived from the chassis discovery policy.
    • C. it can be generated automatically from the service profile template.
    • D. it can be configured by cloning a virtual machine profile
    • E. it can be derived from the initial template or the updating template.

    Answer: AB

    NEW QUESTION 17
    You need to install Cisco UCS Central Software at a customer site and set it up to manage Cisco UCS Manager.
    What should you do to accomplish this goal?

    • A. Register the Cisco UCS domains in Cisco UCS Central Software.
    • B. Register the same Cisco UCS equipment that is managed by Cisco UCS Manager, and Cisco UCS Manager itself, in Cisco UCS Central Software.
    • C. Register Cisco UCS Manager in Cisco UCS Central Software.
    • D. Register Cisco UCS Central Software in Cisco UCS Manager.

    Answer: A

    NEW QUESTION 18
    Which of the following is the most accurate concerning the link configuration between Cisco Unified Computing System 22XX I/O modules and Cisco Unified Computing System 62XX Fabric Interconnects?

    • A. Port channels are always recommended when using source-dest-mac load balancing.
    • B. The addition of links to a port channel requires a reacknowledgement.
    • C. You cannot mix and match discrete links and port channeling for different chassis when using 22XX.
    • D. Port channels do not require a Global Chassis Discovery policy.

    Answer: A

    NEW QUESTION 19
    You must upgrade a Cisco UCS -Series Server. Where must the Cisco UCS bundle image be located before you can begin the upgrade?

    • A. the Cisco Integrated Management Controller memory of the server
    • B. a USB drive connected to a Cisco UCS Fabric Interconnect
    • C. a TFTP server accessible to the Cisco UCS Fabric Interconnect
    • D. the flash file system of the fabric interconnect

    Answer: C

    Explanation: Reference:
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/21/b_GUI_Firmware_Man
    ger.html#concept_1923688E7A2E46239DCAE363E4A3DE81

    NEW QUESTION 20
    Which two statements about the maintenance policy configurations available from the Cisco UCS Manager GUI are true? (Choose two.)

    • A. A maintenance policy can be defined for the service profile associated to a server and for updating a service profile bound to one or more service profiles.
    • B. A maintenance policy is used to configure a nondisruptive upgrade of the Cisco UCS Fabric Interconnects.
    • C. A maintenance policy can defer the direct deployment of firmware images for components that use neither the host firmware nor the management firmware packages available in the Cisco UCS Manager, such as fabric interconnects and IOMs.
    • D. A maintenance policy can deploy service profile changes immediately, when acknowledged by an admin user or automatically at the time specified in the schedule.
    • E. A maintenance policy can be used only to apply nondisruptive service profile changes to servers.

    Answer: BD

    Explanation: Reference:
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/20/b_UCSM_GUI_Configura

    P.S. Easily pass 300-175 Exam with 349 Q&As Passcertsure Dumps & pdf Version, Welcome to Download the Newest Passcertsure 300-175 Dumps: https://www.passcertsure.com/300-175-test/ (349 New Questions)