350-401 | Renew 350-401 Guidance 2021

Proper study guides for Up to the immediate present Cisco Implementing and Operating Cisco Enterprise Network Core Technologies certified begins with Cisco 350-401 preparation products which designed to deliver the Simulation 350-401 questions by making you pass the 350-401 test at your first time. Try the free 350-401 demo right now.

Free 350-401 Demo Online For Cisco Certifitcation:

NEW QUESTION 1
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?

  • A. security group tag ACL assigned to each port on a switch
  • B. security group tag number assigned to each port on a network
  • C. security group tag number assigned to each user on a switch
  • D. security group tag ACL assigned to each router on a network

Answer: B

NEW QUESTION 2
Refer to the exhibit.
350-401 dumps exhibit
What is the JSON syntax that is formed the data?

  • A. Name: Bob, Johson, Age: 75, Alive: true, Favourite Food
  • B. [Cereal, ''Mustard'', ''Onions}}
  • C. Name'', ''Bob'' Johson'', ''Age'', 75, ''Alive'', true, ''favourite Foods'', [''Cereal, ''Mustard'', Onions''}}
  • D. Name', 'Bob Johson,' 'Age', 75, 'Alive', true, 'favourite Foods' 'Cereal’, ’Mustard', 'Onions'}
  • E. Name''. ''Bob Johson'', ''Age'': Seventyfive, ''Alive'' true, ''favourite Foods'' ,[Cereal'' ''Mustard'' ''Onions''}}

Answer: C

NEW QUESTION 3
Which two pieces of information are necessary to compute SNR? (Choose two.)

  • A. EIRP
  • B. noise floor
  • C. antenna gain
  • D. RSSI
  • E. transmit power

Answer: BD

NEW QUESTION 4
An engineer is configuring local web authentication on a WLAN. The engineer chooses the Authentication radio button under the Layer 3 Security options for Web Policy. Which device presents the web authentication for the WLAN?

  • A. ISE server
  • B. local WLC
  • C. RADIUS server
  • D. anchor WLC

Answer: B

NEW QUESTION 5
Refer to the exhibit.
350-401 dumps exhibit
The WLC administrator sees that the controller to which a roaming client associates has Mobility Role Anchor configured under Clients > Detail. Which type of roaming is supported?

  • A. Indirect
  • B. Layer 3 intercontroller
  • C. Layer 2 intercontroller
  • D. Intracontroller

Answer: B

NEW QUESTION 6
At which Layer does Cisco DNA Center support REST controls?

  • A. EEM applets or scripts
  • B. Session layer
  • C. YMAL output from responses to API calls
  • D. Northbound APIs

Answer: D

NEW QUESTION 7
What is the difference between the enable password and the enable secret password when service password encryption is enable on an IOS device?

  • A. The enable password is encrypted with a stronger encryption method.
  • B. There is no difference and both passwords are encrypted identically.
  • C. The enable password cannot be decrypted.
  • D. The enable secret password is protected via stronger cryptography mechanisms.

Answer: D

NEW QUESTION 8
Refer to the exhibit.
350-401 dumps exhibit
Link1 is a copper connection and Link2 is a fiber connection. The fiber port must be the primary port for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port is blocked by spanning tree. An engineer enters the spanning- tree port-priority 32 command on GO/1 on SW2, but the port remains blocked. Which command should be entered on the ports that are connected to Link2 to resolve the issue?

  • A. Enter spanning-tree port-priority 32 on SW1.
  • B. Enter spanning-tree port-priority 224 on SW1.
  • C. Enter spanning-tree port-priority 4 on SW2.
  • D. Enter spanning-tree port-priority 64 on SW2.

Answer: A

NEW QUESTION 9
Which statement about multicast RPs is true?

  • A. RPs are required only when using protocol independent multicast dense mode.
  • B. RPs are required for protocol independent multicast sparse mode and dense mode.
  • C. By default, the RP is needed periodically to maintain sessions with sources and receivers
  • D. By default, the RP is needed only to start new sessions with sources and receivers.

Answer: D

NEW QUESTION 10
What the role of a fusion in an SD-Access solution?

  • A. provides connectivity to external networks
  • B. acts as a DNS server
  • C. performs route leaking between user-defined virtual networks and shared services
  • D. provides additional forwarding capacity to the fabric

Answer: C

NEW QUESTION 11
Which description of an SD-Access wireless network infrastructure deployment is true?

  • A. The access point is part of the fabric underlay.
  • B. The WLC is part of the fabric underaly.
  • C. The access point is part the fabirc overlay.
  • D. The wireless client is part of the fabirc overlay.

Answer: C

NEW QUESTION 12
When using TLS for syslog, which configuration allows for secure and reliable transportation of messages to its default port?

  • A. logging host 10.2.3.4 vrf mgmt transport tcp port 6514
  • B. logging host 10.2.3.4 vrf mgmt transport udp port 6514
  • C. logging host 10.2.3.4 vrf mgmt transport tcp port 514
  • D. logging host 10.2.3.4 vrf mgmt transport udp port 514

Answer: A

NEW QUESTION 13
Which QoS component alters a packet to change the way that traffic is treated in the network?

  • A. Marking
  • B. Classification
  • C. Shaping
  • D. Policing

Answer: A

NEW QUESTION 14
Refer to this output. What is the logging severity level?
R1#Feb 14 37:15:12:429: %LINEPROTO-5-UPDOWN Line protocol on interface GigabitEthernet0/1. Change state to up

  • A. Notification
  • B. Alert
  • C. Critical
  • D. Emergency

Answer: A

NEW QUESTION 15
Which two protocols are used with YANG data models? (Choose two.)

  • A. HTTPS
  • B. SSH
  • C. RESTCONF
  • D. TLS
  • E. NFTCONF

Answer: CE

NEW QUESTION 16
Which statements are used for error handling in Python?

  • A. try/catch
  • B. try/except
  • C. block/rescue
  • D. catch/release

Answer: B

NEW QUESTION 17
Refer to the exhibit.
350-401 dumps exhibit
Which statement about the OPSF debug output is true?

  • A. The output displays all OSPF messages which router R1 has sent to received on interface Fa0/1.
  • B. The output displays all OSPF messages which router R1 has sent or received on all interfaces.
  • C. The output displays OSPF hello messages which router R1 has sent received on interface Fa0/1.
  • D. The output displays OSPF hello and LSACK messages which router R1 has sent or received.

Answer: C

NEW QUESTION 18
A client with IP address 209 16b 201 2b must access a web server on port 80 at 209 I6b.200.22b. To allow this traffic. an engineer must add a statement to an access control list that is applied in the inbound direction on the port connecting to the web server Which statement allows this traffic?

  • A. permit tcp host 209 165 200 225 eq 80 host 209.165.201.25
  • B. permit tcp host 209 165.201 25 host 209.165.200.225 eq 80
  • C. permit tcp host 209.165.200 225 It 80 host 209.165.201.25
  • D. permit tcp host 209.165.200.225 host 209.165.201.25 eq 80

Answer: B

NEW QUESTION 19
Refer to the exhibit.
350-401 dumps exhibit
Assuming that R is a CE router, which VRF is assigned to Gi0/0 on R1?

  • A. VRF VPN_B
  • B. Default VRF
  • C. Management VRF
  • D. VRF VPN_A

Answer: D

NEW QUESTION 20
Which PAgP mode combination prevents an Etherchannel from forming?

  • A. auto/auto
  • B. desirable/desirable
  • C. auto/desirable
  • D. desirable

Answer: A

NEW QUESTION 21
Which statement about Cisco EAP-FAST is true?

  • A. It does not require a RADIUS server certificate.
  • B. It requires a client certificate.
  • C. It is an IETF standard.
  • D. It operates in transparent mode.

Answer: A

NEW QUESTION 22
What is the difference between a RIB and a FIB?

  • A. The RIB is used to make IP source prefix-based switching decisions
  • B. The FIB is where all IP routing information is stored
  • C. The RIB maintains a mirror image of the FIB
  • D. The FIB is populated based on RIB content

Answer: D

NEW QUESTION 23
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?

  • A. MACsec
  • B. IPsec
  • C. SSL
  • D. Cisco Trustsec

Answer: A

NEW QUESTION 24
If a VRRP master router fails, which router is selected as the new master router?

  • A. router with the highest priority
  • B. router with the highest loopback address
  • C. router with the lowest loopback address
  • D. router with the lowest priority

Answer: A

NEW QUESTION 25
......

Thanks for reading the newest 350-401 exam dumps! We recommend you to try the PREMIUM 2passeasy 350-401 dumps in VCE and PDF here: https://www.2passeasy.com/dumps/350-401/ (100 Q&As Dumps)