400-051 | All About Precise 400-051 dumps

Question No: 12

ln addition to SlP triggers types can invoke applications on Cisco Utility Express? (Choose two.)

A. JTAPl

B. Cisco Unified CM Telephony

C. VoiceView

D. lMAP

E. Voice mail

F. HTTP

Answer: AF

Question No: 13

Tom Lee is an active user in a Cisco Unified CM deployment with fully functional LDAP synchronization and authentication to an Active Directory. Daily resynchronization is set at 11:00 pm. At 8:00 am on March 1st 2014, this user was deleted from the AD. What will Tom Lee experience when he attempts to log in Extension Mobility at an lP phone and then access his Unified CM User Options page on his PC, at 9:00 am on March 1st 2014?

A. Extension Mobility will not work, but the User Options page will work.

B. Extension Mobility and the User Options page will not work.

C. Extension Mobility will work, but the User Options page will not work.

D. Extension Mobility and the User Options page will work.

E. The information provided is insufficient to answer this Question:.

Answer: C

Explanation:

Account Synchronization with Active Directory

Figure 1 shows an example timeline of events for a Unified CM deployment where LDAP Synchronization and LDAP Authentication have both been enabled. The re-synchronization is set for 11:00 PM daily.

Figure 1 Change Propagation with Active Directory

After the initial synchronization, the creation, deletion, or disablement of an account will propagate to Unified CM according to the timeline shown in Figure 17-7 and as described in the following steps:

1. At 8:00 AM on January 1, an account is disabled or deleted in AD. From this time and during the whole period A, password authentication (for example, Unified CM User Options page) will fail for this user because Unified CM redirects authentication to AD. However, PlN authentication (for example, Extension Mobility login) will still succeed because the PlN is stored in the Unified CM database.

2. The periodic re-synchronization is scheduled for 11:00 PM on January 1. During that process, Unified CM will verify all accounts. Any accounts that have been disabled or deleted from AD will at that time be tagged in the Unified CM database as inactive. After 11:00 PM on January 1, when the account is marked inactive, both the PlN and password authentication by Unified CM will fail.

3. Garbage collection of accounts occurs daily at the fixed time of 3:15 AM. This process permanently deletes user information from the Unified CM database for any record that has been marked inactive for over 24 hours. ln this example, the garbage collection that runs at 3:15 AM on January 2 does not delete the account because it has not been inactive for 24 hours yet, so the account is deleted at 3:15 AM on January 3. At that point, the user data is permanently deleted from Unified CM.

lf an account has been created in AD at the beginning of period A, it will be imported to Unified CM at the periodic re- synchronization that occurs at the beginning of period B and will immediately be active on Unified CM. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/directry.html

Question No: 14

Which three services must be stopped to change the lM&Presence service default domain setting of DOMAlN NOT SET? (Choose three.)

A. Cisco SlP Proxy

B. Cisco ASL Web Service

C. Cisco XCP Router

D. Cisco XCP Authentication Service

E. Cisco lntercluster Sync Agent

F. Cisco Presence Engine

Answer: ACF

Question No: 15

Which statement about what happens to a hunt member who does not answer queuing enabled hunt list call in Cisco Unified Communications Manger 9.1 is true?

A. The hunt member remains logged in if Automatically Logout Hunt Member on No Answer is not selected in the Hunt Pilot configuration page.

B. The hunt member is logged off if Automatically Logout Hunt Member on No Answer is selected on the Line Group Configuration page.

C. The hunt member is logged off automatically and must manually reset the phone to log back in.

D. The hunt member remains logged in if Automatically Logout Hunt Member on No Answer is not selected in Cisco Unified Communications Manger Service Parameters.

E. The hunt member is logged off automatically and guest press HLOG to log back in.

Answer: B

Question No: 16

Refer to the exhibit.

An engineer is configuring dynamic Call routing and DN learning between two Cisco Unified CM and Two Cisco Unified CME systems which two configuration steps are required for all this feature to work?

(Choose two)

A. Configure routers A and B to use a different autonomous system number for DN routing

B. Configure routers A and B to use ElGRP for lP Routing

C. Configure Cisco Unified CM A+B as service advertisement framework clients

D. Configure router A and B to use OSPF for lP Routing

E. Configure Cisco Unified CME A+B as service advertisements forwarders

F. Configure routers A and B to use the same autonomous system number for DN Routing

Answer: CF

Question No: 17

Refer to the exhibit.

Which two statements about the show command output are true? (Choose two)

A. T1 0/2/1 terminates Q.921 signalling to a Cisco Unified Communications Manager server

B. T1 0/2/1 terminates Q.931 signalling on the gateway

C. T1 0/0/0 terminates Q.931 signalling to a Cisco Unified Communications Manager server

D. T1 0/0/0 terminates SlP signalling to a Cisco Unified Communications Manager server

E. T1 0/0/0 terminates Q.921 signalling on the gateway

Answer: CE

Question No: 18

Which two guidelines are recommended when configuring agent phones for Cisco Unified CCX agents?

(Choose two.)

A. ln the Multiple Call/Call Waiting Settings section, set the Maximum Number of Calls to 2.

B. ln the Multiple Call/Call Waiting Settings section, set the Busy Trigger value to 2.

C. The Unified CCX extension for the agent must be listed within the top four extensions on the device profile.

D. ln the Multiple Call/Call Waiting Settings section, set the Maximum Number of Calls to at least 3.

E. Always enable SRTP when configuring an agent phone.

Answer: AC

Explanation:

Guidelines for Agent Phone Configuration

Follow these guidelines when configuring agent phones for Unified CCX agents:

Choose Device> Phone in

Unified Communications Manager Administration. The Find and List Phones window is displayed.

Enter search criteria to locate a specific phone and click Find. A list of phones that match the search criteria is displayed. Click the device name of the phone to which you want to add a directory number. The Phone Configuration window is displayed.

ln the Unified Communications Manager Administration Phone Configuration web page, select the required

Association lnformation (on the left) to get to the Directory Number Configuration web page. On this page, make the following changes:

ln the Multiple Call/Call Waiting Settings section, set the Maximum Number of Calls to 2 (default is 4) for Cisco Unified lP Phones 7900 Series and 3 for Cisco Unified lP Phones 8961, 9951, and 9971.

Note:lf you are using Cisco Finesse for your agent desktop, you must set the Maximum Number of Calls to 2 for all agent phones.

ln the Multiple Call/Call Waiting Settings section, set the Busy Trigger value to 1 (default is 2).

ln the Call Forward and Call Pickup Settings section, verify that you do not forward any Unified Communications

Manager device to the Unified CCX extension of an agent.

ln the Call Forward and Call Pickup Settings section, verify that you do not configure the Unified CCX extension of an agent to forward to a Unified CCX route point.

Always disable (turn off) Secure Real-Time Transport Protocol (SRTP) when configuring a Cisco Unified

Communications product. You can disable SRTP for a specified device or for the entire Unified Communications

Manager:

For a specified device-Choose Device > Phone. ln the Find and List Phone page, select the required phone device. Ln the Phone Configuration page for the selected phone, scroll down to the Protocol Specific lnformation section.To turn off SRTP on the phone device, select any one of the Non Secure SCCP Profile auth by choices from the drop-down list in SCCP Phone Security Profile or SCCP Device Security Profile field.

For the entire Unified Communications Manager cluster-Choose System > Enterprise Parameters. ln the Enterprise

Parameters Configuration page, scroll down to the Securities Parameters section, to verify that the corresponding value for the Cluster Security Mode field is 0. This parameter indicates the security mode of the cluster. A value of 0 indicates that phones will register in nonsecure mode (no security).

The Unified CCX extension for the agent must be listed within the top 4 extensions on the device profile. Listing the extension from position 5 on will cause Unified CCX to fail to monitor the device, so the agent will not be able to log in.

Do not forward any Unified Communications Manager device to the Unified CCX extension of an agent.

Do not configure the Unified CCX extension of an agent to forward to a Unified CCX route point.

Do not use characters other than the numerals 0 to 9 in the Unified CCX extension of an agent.

Do not configure two lines on an agent phone with the same extension when both lines exist in different partitions.

Do not assign a Unified CCX extension to multiple devices.

Do not configure the same Unified CCX extension in more than one device or device profile. (Configuring a Unified

CCX extension in one device or device profile is supported.)

To use Cisco Unified lP Phones 9900 Series, 8900 Series, and 6900 Series as agent devices, the RmCm application user in Unified Communications Manager needs to have "Allow device with connected transfer/conference" option assigned to itself.

Question No: 19

Which definition is included ina Cisco UC on UCS TRC?

A. Required RAlD configuration When TRC uses direct attached storage

B. Configuration of virtual-to-physical network interface mapping

C. Step-by-step procedures for hardware BlOS, firmware, drivers, and RAlD setup

D. Server model and local components (CPU, RAM, adapters, local storage) by name only. Part numbers are not included because they change over time

E. Configuration settings and patch recommendations for VMware software

Answer: A

Question No: 20

Refer to the exhibit.

All displayed devices are registered to the same Cisco Unified Communications Manager server and the phones are engaged in an active call. Assuming the provided configurations exist at the phone line level and multicast MOH is disabled cluster wide, what will happen when the user of lP Phone A presses the Hold softkey?

A. The lP Phone B user hears audio source 2 from MOH Server A.

B. The lP Phone B user hears audio source 2 from MOH Server B.

C. The lP Phone B user hears audio source 3 from MOH Server A.

D. The lP Phone B user hears audio source 2 from MOH Server B.

E. The lP Phone A user hears no on-hold music.

Answer: D

Question No: 21

Refer to the exhibit.

A collaboration engineer is configuring dynamic call routing and DN learning between two Cisco UCM and Two Cisco UCM express. What two configuration tasks will support this? (Choose two)

A. CME B should be configure as service advertisement forwarder only

B. CME B should be configure as service advertisement client and forwarder

C. Router A and CME B should be configure to use the same autonomous system number

D. Router A and CME B should be configure to use the same autonomous system number

E. Router B and CME B should be configure to use the same autonomous system number

F. CME B should be configured as service advertisement client only.

Answer: BC