70-741 | Microsoft 70-741 Faq 2021

Want to know Ucertify 70-741 Exam practice test features? Want to lear more about Microsoft Networking with Windows Server 2021 certification experience? Study Precise Microsoft 70-741 answers to Avant-garde 70-741 questions at Ucertify. Gat a success with an absolute guarantee to pass Microsoft 70-741 (Networking with Windows Server 2021) test on your first attempt.

NEW QUESTION 1
You have a DNS server named Server1 that runs Windows Server 2021. Server1 has network interfaces that have the following IP addresses:
-10.0.0.100
-131.107.0.100
The internal network uses an IP address space of 10.0.0.0/16.
Server1 provides DNS name resolution to both internal and external clients. Server1 hosts the primary zone for contoso.com.
You need to configure Server1 to meet the following requirements:
* Internal clients must be able to use Server 1 to resolve internal-based DNS names.
* External clients must not be able to use Server1 to resolve Internal-based DNS names.
* External clients must able to use Server1 to resolve names in the contoso.com zone.
Which commands should you run on Server1.? To answer select the appropriate option in answer area.
70-741 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-741 dumps exhibit

NEW QUESTION 2
You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your network. IPAM is configured to use Group Policy provisioning.
You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones. You want to identify which user added the record.
You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday. You need to ensure that the operational events in the event catalog are never older than one hour.
What should you do?

  • A. From the properties on the DNS zone, modify the refresh interval.
  • B. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
  • C. From Task Scheduler, modify the MicrosoftWindowsIPAMAudit task.
  • D. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdlet.

Answer: C

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2021.
The settings for VM1 are configured as shown in the exhibit below.
70-741 dumps exhibit
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Data Exchange integration service for VM1. Does this meet the goal?

  • A. YES
  • B. NO

Answer: B

NEW QUESTION 4
Your network contains multiple wireless access points (WAPs) that use WPA2-Personal authentication. The network contains an enterprise root certification authority (CA).
The security administrator at your company plans to implement WPA2-Enterprise authentication on the WAPs.
To support the authentication change, you deploy a server that has Network Policy Server (NPS) installed. You need to configure NPS to authenticate the wireless clients.
What should you do on the NPS server?

  • A. Add RADIUS clients and configure network policies.
  • B. Create a remote RADIUS server group and configure connection request policies.
  • C. Create a remote RADIUS server group and install a server certificate.
  • D. Add RADIUS clients and configure connection request policies.

Answer: A

Explanation:
https://ittrainingday.com/2013/12/25/how-to-configure-a-windows-radius-server-for-802-1x-wireless-or-wired-c

NEW QUESTION 5
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
Users report that when they turn on their client computers, it takes a long time to access the network. You validate that it takes a long time for the computers to receive an IP address from Server1.
You monitor the network traffic and discover that Server1 issues five ping commands on the network before leasing an IP address.
You need to reduce the amount of time it takes for the computers to receive an IP address. What should you do?

  • A. From the properties of Scope1, modify the Conflict detection attempts setting.
  • B. From the properties of Scope1, configure Name Protection.
  • C. From the properties of IPv4, configure the bindings.
  • D. From IPv4, create a new filter.
  • E. From the properties of Scope1, create an exclusion range.
  • F. From IPv4, run the DHCP Policy Configuration Wizard.
  • G. From Control Panel, modify the properties of Ethernet.
  • H. From Scope1, create a reservation.

Answer: A

Explanation:
https://technet.microsoft.com/en-us/library/ee941125(v=ws.10).aspx

NEW QUESTION 6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2021.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 7
Your network contains an Active Directory forest named contoso.com.
The forest contains five domains. You manage DNS for the contoso.com domain only. You are not responsible for managing DNS for the child domains.
The DNS servers in a child domain named research.contoso.com are reconfigured often.
You need to ensure that clients in contoso.com can resolve addresses in research.contoso.com. The solution must minimize zone replication traffic.
What should you do?

  • A. Create a primary zone for research.contoso.com on the DNS servers of contoso.com
  • B. Create a secondary zone for research.contoso.com on the DNS servers of contoso.com
  • C. Create a stub zone for research.contoso.com on the DNS servers of contoso.com
  • D. Create a delegation for research.contoso.com

Answer: D

Explanation:
References:
https://blogs.msmvps.com/acefekay/2010/10/01/dns-parent-child-dns-delegation-how-to-create-a-dns-delegation

NEW QUESTION 8
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 that runs Windows Server 2021.
Server2 has 10 IPv4 scopes.
You need to ensure that the scopes are backed up every 30 minutes to the folder D:DHCPBackup. What should you run?

  • A. dism.exe
  • B. dns.exe
  • C. dnscmd.exe
  • D. netsh.exe
  • E. Set-DhcpServerDatabase
  • F. Set-DhcpServerv4DnsSetting
  • G. Set-DhcpServerv6DnsSetting
  • H. Set-DNSServerSetting

Answer: E

NEW QUESTION 9
You have a remote access server named Server1 that runs Windows Server 2021. Server1 has DirectAccess enabled.
You have a proxy server named Server2. All computers on the internal network connect to the Internet by using the proxy.
On Server1, you run the command Set-DAClient -forceTunnel Enabled.
You need to ensure that when a DirectAccess client connects to the network, the client accesses all the Internet resources through the proxy.
What should you run on Server1?

  • A. Set-DnsClientNrptRule
  • B. Set.DANetworkLocationServer
  • C. Set-DAClient
  • D. Set-DAServer

Answer: C

NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
Server1 has the following IP configuration.
70-741 dumps exhibit
Server2 has the following IP configuration.
70-741 dumps exhibit
Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
Solution: On Server1, you modify the ActivatePolicies setting of the scope. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 11
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
70-741 dumps exhibit
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
70-741 dumps exhibit
You need to ensure that when a record is added dynamically to fabrikam.com, only the computer that created the record can modify the record. The solution must allow administrators to modify all of the records in fabrikam.com.
What should you do?

  • A. Change fabrikam.com to an Active Directory-integrated zone.
  • B. Raise the functional level of the domain.
  • C. Modify the security settings of the Fabrikam.com.dns file.
  • D. Modify the Start of Authority (SOA) settings of fabrikam.com

Answer: A

Explanation:
https://technet.microsoft.com/en-us/library/cc753751(v=ws.11).aspx

NEW QUESTION 12
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 and a member server named Server2.
Server1 has the DNS Server role installed. Server2 has IP Address Management (IPAM) installed. The IPAM server retrieves zones from Server1 as shown in the following table.
70-741 dumps exhibit
The IPAM server has one access policy configured as shown in the exhibit. (Click the Exhibit button.)
70-741 dumps exhibit
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
70-741 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: Yes
As a member of the IPAM DNS Administrator Role of the ADatum zone, User1 can add DNS records to it. Box 2: Yes
As a member of the DNS Record Administrator Role of the Fabrikam zone, User1 can add DNS records to it. Box 3: No
DNS Record Administrators cannot delete zones, only administer DNS records. References: https://technet.microsoft.com/en-us/library/hh831353(v=ws.11).aspx

NEW QUESTION 13
You have a virtual machine named VM1 that runs Windows Server 2021, VM1 hosts a service that requires high network throughput.
VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface, Quality of Service? (QoS), and Receive Side Scaling (RSS).
You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run on the host of VM1?

  • A. Set-NetAdapterRss
  • B. Set-NetAdapterRdma
  • C. Set-NetAdapterQos
  • D. Set-NetAdapterSriov

Answer: A

NEW QUESTION 14
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:
70-741 dumps exhibit
Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM2 to private1 and External1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on VM2. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 15
Your network contains an Active Directory forest named contoso.com. The forest has three sites named Site1, Site2 and Site3.
Distributed File System (DFS) for the forest is configured as shown in the exhibit.
70-741 dumps exhibit
The forest contains a server named Server2 that hosts the DFS namespace.
\Contoso.comNamespace1Folder2 has the following configuration.
70-741 dumps exhibit
\ContosoNamespace1Folder2 has the targets configured as shown in the following table.
70-741 dumps exhibit
For each of the following statement, Select Yes if Statement is true. Otherwise, select No.
70-741 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-741 dumps exhibit

NEW QUESTION 16
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2021 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage -Edition Datacenter -DeploymentType Host -Package Microsoft-NanoServerCompute-Package -MediaPath ‘D:’ -TargetPath C:Nano1Nano1.wim -ComputerName Nano1 -DomainName Contoso.com Does this meet the goal?

  • A. Yes
  • B. NO

Answer: A

NEW QUESTION 17
You have two servers named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 have the Network Policy Server role service installed.
Server1 is configured to forward connection requests to Server2.
Incoming connection requests to Server1 contain the User Name attribute. The User Name attribute does not contain the domain name suffix.
You need to ensure that the User Name attribute will be replaced by using a format of username@contoso.com.
How should you configure the attribute manipulation role on Server1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
70-741 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-741 dumps exhibit

NEW QUESTION 18
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server4, and Server5 that run Windows Server 2021.
Distributed File System (DFS) is deployed as shown in the DFS Configuration exhibit. (Click the Exhibit button.)
70-741 dumps exhibit
You configure the replication schedule for \Contoso.comNamespace1Folder1 as shown in the Replication Schedule exhibit. (Click the Exhibit button.)
70-741 dumps exhibit
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphics.
70-741 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
The Replicated Folder (Folder1) refers to the name of the DFS target, not the name of the local folder. It does not matter if the local folder name does not match the name of the DFS target. Therefore, replication will work as normal according to the configured schedule.

NEW QUESTION 19
Your company has three offices. The offices are located in Seattle, Chicago, and Montreal.
You are configuring a new WAN link between the three offices by using the Remote Access server role in Windows Server 2021. You will use Border Gateway Protocol (DGP) as a routing protocol between the sites.
You need to configure the server in the Seattle office for BGP routing. What should you do first?

  • A. From Routing and Remote Access, add a new IPv4 routing protocol
  • B. From Windows PowerShell, run the Add-BgpPeer cmdlet and specify the –LocalASN parameter
  • C. From Routing and Remote Access, add a new IPv6 routing protocol
  • D. From Windows PowerShell, run the Add-BgpRouter cmdlet and specify the –LocalASN parameter

Answer: D

NEW QUESTION 20
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
Server1 has the following IP configuration.
70-741 dumps exhibit
Server2 has the following IP configuration.
70-741 dumps exhibit
Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
Solution: On Server2, you modify the ConflictDetectionAttempts value for IPv4. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 21
You are configuring the network for a small branch office. Currently, the branch office does not connect directly to the Internet.
In the branch office, you deploy a new server named Server1 that has a server Core installation of Windows Server 2021. Server1 has two network adapters configured as shown in the following table.
70-741 dumps exhibit
You plan to use Server1 to provide Internet connectivity for the branch office.
Routing and Remote Access (RRAS) in installed and configured for VPN remote access on Server1. You need to configure RRAS on Server1 to provide network address translation (NAT).
Which command or cmdlet should you use first?

  • A. New-NetNat Nat1 -ExternalIPInterfaceaddressPrefix 131.107.10.1/29
  • B. netsh.exe routing ip nat install
  • C. route.exe add 192.168.1.1 255.255.255.0 131.107.10.1 metric 1
  • D. Enable-NetNatTransitionConfiguration

Answer: B

Explanation:
References:
https://social.technet.microsoft.com/Forums/exchange/en-US/5cd50748-af62-4d29-ab92-1a010b9a1a9f/how-to-

NEW QUESTION 22
You have a DNS server named Server1 that runs Windows Server 2021. Server1 has an Active Directory-integrated zone named adatum.com.
All client computers run Windows 10.
You recently encountered unexpected responses to DNS client queries in the adatum.corn zone. You need to log all the records written to the zone.
Which cmdlet should you run?

  • A. Set-DnsServerDsSetting
  • B. Set-DnsServerDiagnostics
  • C. Set-DnsServer
  • D. Add-DnaServerQueryResolutionPolicy

Answer: B

NEW QUESTION 23
You have Hyper-V host named Server1. Serve1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an Ipv4 address.
Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors.
What should you do?

  • A. From Device Manager on Server1, configure TCP Checksum Offload (IPv4).
  • B. From Windows PowerShell on VM1, run the Enable-NetAdapterRSS cmdlet.
  • C. From Windows PowerShell on Server1, run the Enable-NetAdapterPacketDirect cmdlet.
  • D. From Windows PowerShell on VM1, run the Enable-NetAdapterPacketDirect cmdlet.

Answer: B

NEW QUESTION 24
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that has the Network Policy and Access Services server role installed. You create a Shared Secret Network Policy Server (NPS) template named Template1.
You need to view the shared secret string used for Template1.
Solution: From the Network Policy Server console, you export the configuration, and you view the exported XML file.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 25
You have a server that is configured as a hosted BranchCache server.
You discover that a Service Connection Point (SCP) is missing for the BranchCache server. What should you run to register the SCP?

  • A. setspn.exe
  • B. Reset-BC
  • C. ntdsutil.exe
  • D. Enable-BCHostedServer

Answer: D

Explanation:
https://technet.microsoft.com/en-us/library/jj862376(v=ws.11).aspx

NEW QUESTION 26
You have a Nano Server that has one network interface. The server is configured to obtain an IP address automatically.
You need to configure the server to have the following IP configurations:
• IP address 172.16.3.100
• Default gateway: 172.163.1
• Subnet mask: 255.255.255.0
What command should you run? To answer, select the appropriate options in the answer area.
70-741 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
References: https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netipaddress?view=win10-ps

NEW QUESTION 27
......

P.S. 2passeasy now are offering 100% pass ensure 70-741 dumps! All 70-741 exam questions have been updated with correct answers: https://www.2passeasy.com/dumps/70-741/ (248 New Questions)