70-743 | Practical 70-743 Dumps 2021

Act now and download your 70 743 exam today! Do not waste time for the worthless 70 743 exam tutorials. Download 70 743 exam with real questions and answers and begin to learn exam 70 743 with a classic professional.

Online 70-743 free questions and answers of New Version:

NEW QUESTION 1
HOTSPOT
You have a server named Server1 that runs Windows Server 2021 and has a Hyper-V server role installed.
You open Disk Management on Server1 as shown in the following graphic.
70-743 dumps exhibit
You plan to configure Disk 13 as a pass-through disk for a generation 1 virtual machine.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
70-743 dumps exhibit

    Answer:

    Explanation: 70-743 dumps exhibit

    NEW QUESTION 2
    You have a Hyper-V host that runs Windows Server 2021. The host contains a virtual machine named VM1. VM1 has resource metering enabled.
    You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.
    Which cmdlet should you run?

    • A. New-VMResourcePool
    • B. Set-VMNetworkAdapter
    • C. Add-VMNetworkAdapterAcl
    • D. Set-VMNetworkAdapterRoutingDomainMapping

    Answer: C

    Explanation: References:
    https://technet.microsoft.com/itpro/powershell/windows/hyper-v/add-vmnetworkadapteracl

    NEW QUESTION 3
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021. All domain controllers run Windows Server
    2012 R2.
    Contoso.com has the following configuration:
    70-743 dumps exhibit
    You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.
    You need to configure Active Directory to support the planned deployment. Solution: You raise the forest (domain) functional level to Windows Server 2012 R2. Does this meet the goal?

    • A. Yes
    • B. No

    Answer: B

    Explanation: For a Windows Server 2012 R2 AD FS server, this solution would work. However, new installations of AD FS 2021 require the Active Directory 2021 schema (minimum version 85).
    References:
    https://technet.microsoft.com/en-us/windows-server-docs/identity/ad-fs/operations/configuredevice- based-conditional-access-on-premises

    NEW QUESTION 4
    You have a Windows Server 2021 failover cluster named Cluster1 that contains four nodes named Server1,
    Server2, Server3, and Server4.
    You need to configure Cluster1 to use directly attached storage to host several virtual machines. You run the Enable-ClusterStorageSpacesDirect cmdlet on Server1.
    What should you do next?

    • A. Run the Enable-ClusterStorageSpacesDirect cmdlet on the other three nodes.
    • B. Create volumes.
    • C. Create a storage pool.
    • D. Run the Add-ClusterResource cmdlet on all of the node

    Answer: B

    NEW QUESTION 5
    Note: This question is part of a series of questions that present the same scenario. Each question in
    the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2021.
    The settings for VM1 are configured as shown in the exhibit below.
    70-743 dumps exhibit
    You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You start the Hyper-V Guest Service Interface service on VM1.
    Does this meet the goal?

    • A. YES
    • B. NO

    Answer: A

    NEW QUESTION 6
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Refer to exhibit:
    70-743 dumps exhibit
    Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
    You need to ensure that VM1 connects to the corporate network by using NAT.
    Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use VM2 as the default gateway.
    Does this meet the goal?

    • A. Yes
    • B. No

    Answer: A

    NEW QUESTION 7
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2021.
    The settings for VM1 are configured as shown in the exhibit below.
    70-743 dumps exhibit
    You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You need to enable the Data Exchange integration service for VM1.
    Does this meet the goal?

    • A. YES
    • B. NO

    Answer: A

    NEW QUESTION 8
    HOTSPOT
    You have a four-node Hyper-V cluster named Cluster1.
    A virtual machine named VM1 runs on Cluster1. VM1 has a network adapter that connects to a virtual switch named Network1.
    You need to prevent a network disconnection on VM1 from causing VM1 to move to another cluster node. What command should you run? To answer, select the appropriate options in the answer area.
    70-743 dumps exhibit

      Answer:

      Explanation: 70-743 dumps exhibit

      NEW QUESTION 9
      You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2021. IPAM1 manages 10 DHCP servers.
      You need to provide a user with the ability to track which clients receive which IP addresses from DHCP. The solution must minimize administrative privileges.

      • A. IPAM MSM Administrators
      • B. IPAM ASM Administrators
      • C. IPAM IP Audit Administrators
      • D. IPAM User

      Answer: C

      NEW QUESTION 10
      HOTSPOT
      Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021.
      Server1 has IP Address Management (IPAM) installed. IPAM uses a Windows Internal Database. You install Microsoft SQL Server on Server1.
      You plan to move the IPAM database to SQL Server.
      You need to create a SQL Server login for the IPAM service account.
      For which user should you create the login? To answer, select the appropriate options in the answer area.
      70-743 dumps exhibit

        Answer:

        Explanation: References:
        https://blogs.technet.microsoft.com/yagmurs/2014/07/31/moving-ipam-database-from-windowsinternal- database-wid-to-sql-server-located-on-the-same-server/

        NEW QUESTION 11
        You have a virtual machine named VM1 that runs Windows Server 2021, VM1 hosts a service that requires high network throughput.
        VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface, Quality of Service? (QoS), and Receive Side Scaling (RSS).
        You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run on the host of VM1?

        • A. Set-NetAdapterRss
        • B. Set-NetAdapterRdma
        • C. Set-NetAdapterQos
        • D. Set-NetAdapterSriov

        Answer: D

        NEW QUESTION 12
        DRAG DROP
        You network contains an Active Directory forest. The forest contains an Active Directory Federation Services (AD FS) deployment.
        The AD FS deployment contains the following:
        * An AD FS server named server1.contoso.com that runs Windows Server 2021
        * A Web Application Proxy used to publish AD FS
        * A LIPN that uses the contoso.com suffix
        * A namespace named adfs.contoso.com
        You create a Microsoft Office 365 tenant named contoso.onmicrosoft.com. You use Microsoft Azure Active Directory Connect (AD Connect) to synchronize all of the users and the UPNs from the contoso.com forest to Office 365.
        You need to configure federation between Office 365 and the on-premises deployment of Active Directory.
        Which three commands should you run in sequence from Server1? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
        70-743 dumps exhibit

          Answer:

          Explanation: 70-743 dumps exhibit

          NEW QUESTION 13
          You have a server named Server1 that runs Windows Server 2021.
          On Server1, you use the Basic template to create a new Data Collector Set named CollectorSet1. You need to configure CollectorSet1 to generate performance alerts.
          What should you do before you start CollectorSet1?

          • A. Modify the performance counter data collector of CollectorSet1.
          • B. Add a new data collector to CollectorSet1.
          • C. Modify the configuration data collector of CollectorSet1.
          • D. Add a new task to CollectorSet1.

          Answer: A

          Explanation: https://technet.microsoft.com/en-us/library/cc722414(v=ws.11).aspx

          NEW QUESTION 14
          Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
          After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
          Your network contains an Active Directory domain named contoso.com
          You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2021 source files are located in drive D.
          Solution: You run the following cmdlet.
          New-NanoServerImage –Edition Datacenter –DeploymentType Most –Compute –Media ‘D:’ – TargetPath c:Nano1Nano1.wim –ComputerNamae Nano1 –DomainName Contoso.com
          Does this meet the goal?

          • A. Yes
          • B. NO

          Answer: B

          NEW QUESTION 15
          Your network contains an Active Directory forest. The forest contains two domains named litwareinc.com and contoso.com. The contoso.com domain contains two domain controllers named LON-DC01 and LON-DC02. The domain controllers are located in a site named London that is associated to a subnet of 192.168.10.0/24.
          You discover that LON-DC02 is not a global catalog server. You need to configure LON-DC02 as a global catalog server. What should you do?

          • A. From Active Directory Sites and Services, modify the NTDS Settings object of LON-DC02.
          • B. From Windows PowerShell, run the Set-NetNatGlobal cmdlet.
          • C. From Active Directory Sites and Services, modify the NTDS Settings object of the London site.
          • D. From the properties of the Domain Controllers organizational unit (OU) in Active Directory Users and Computers, modify the Security settings.

          Answer: A

          NEW QUESTION 16
          You have a DHCP server named Server1.
          Server1 has an IPv4 scope that serves 75 client computers that run Windows 10.
          When you review the address leases in the DHCP console, you discover several leases for devices that you do not recognize.
          You need to ensure that only the 75 Windows 10 computers can obtain a lease from the scope. What should you do?

          • A. Run the Add-DhcpServerv4ExclusionRange cmdlet.
          • B. Create and enable a DHCP filter.
          • C. Create a DHCP policy for the scope.
          • D. Run the Add-DhcpServerv4OptionDefinition cmdle

          Answer: A

          NEW QUESTION 17
          HOT SPOT
          You have a Windows Server 2021 failover cluster that contains two servers named Server1 and Server2.
          You need to apply patches to Server1.
          Which two commands should you run before you apply the patches? To answer, select the appropriate options in the answer area.
          70-743 dumps exhibit

            Answer:

            Explanation: References:
            https://support.microsoft.com/en-us/help/174799/how-to-update-windows-server-failover-clusters https://technet.microsoft.com/en-us/library/ee461003.aspx

            NEW QUESTION 18
            You have a server named Server1 that runs Windows Server 2021. Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks.
            You create a virtual disk named Disk 1 that uses a mirrored layout.
            You create a partition named Partition1 that uses all of the available space on Disk 1. You need to extend Partition1.
            What should you do first?

            • A. From Windows PowerShell, run the Resize-VirtualDisk cmdlet.
            • B. From Windows PowerShell, run the Resize-StorageTier cmdlet.
            • C. From Windows PowerShell, run the Expand-IscsiVirtualDisk cmdlet.
            • D. From Disk Management, modify the properties of Partition1.

            Answer: A

            NEW QUESTION 19
            HOTSPOT
            You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host. You run the commands shown in the following graphic:
            70-743 dumps exhibit
            Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
            70-743 dumps exhibit

              Answer:

              Explanation: 70-743 dumps exhibit

              P.S. Easily pass 70-743 Exam with 252 Q&As 2passeasy Dumps & pdf Version, Welcome to Download the Newest 2passeasy 70-743 Dumps: https://www.2passeasy.com/dumps/70-743/ (252 New Questions)