70-743 | Free 70-743 Dumps 2021

Master the exam 70 743 content and be ready for exam day success quickly with this exam 70 743. We guarantee it!We make it a reality and give you real exam 70 743 in our Microsoft 70-743 braindumps. Latest 100% VALID microsoft 70 743 at below page. You can use our Microsoft 70-743 braindumps and pass your exam.

Microsoft 70-743 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. Server1 hosts a virtual machine named VM1 that is in a Running state.
On Server1, you export VM1 and then you import VM1 on Server2. What is the current state of VM1 on Server2?

  • A. Off
  • B. Running
  • C. Paused
  • D. Saved

Answer: B

NEW QUESTION 2
Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and litwareinc.com.
Your company recently deployed DirectAccess for the members of a group named DA_Computers. All client computers are members of DA_Computers.
You discover that DirectAccess clients can access the resources located in the contoso.com domain only. The clients can access the resources in the litwareinc.com domain by using an L2TP VPN connection to the
network.
You need to ensure that the DirectAccess clients can access the resources in the litwareinc.com domain.
What should you do?

  • A. On an external DNS server, create a zone delegation for litwareinc.com.
  • B. From a Group Policy object (GPO), modify the Name Resolution Policy Table (NRPT).
  • C. Add the servers in litwareinc.com to the RAS and IAS Servers group.
  • D. From the properties of the servers in litwareinc.com, configure the delegation setting

Answer: B

NEW QUESTION 3
HOT SPOT
You have a DNS server named Server1 that runs Windows Server 2021. Server1 has network interfaces that have the following IP addresses:
✑ 10.0.0.100
✑ 131.107.0.100
The internal network uses an IP address space of 10.0.0.0/16.
Server1 provides DNS name resolution to both internal and external clients. Server1 hosts the primary zone for contoso.com.
You need to configure Server1 to meet the following requirements:
* Internal clients must be able to use Server 1 to resolve internal-based DNS names.
* External clients must not be able to use Server1 to resolve Internal-based DNS names.
* External clients must able to use Server1 to resolve names in the contoso.com zone.
Which commands should you run on Server1.? To answer select the appropriate option in answer area.
70-743 dumps exhibit

    Answer:

    Explanation: 70-743 dumps exhibit

    NEW QUESTION 4
    You create a Storage Spaces Direct hyper-converged failover cluster. The duster contains three nodes and a 1-TB Storage Spaces Direct volume.
    The cluster will store virtual machines.
    You plan to extend the volume by adding an additional 3 TB.
    What is the minimum amount of extra disk capacity required to accommodate extending the volume?

    • A. 3 TB on the coordinator node
    • B. 3 TB per node
    • C. 4 TB per node
    • D. 4 TB on the coordinator node

    Answer: A

    NEW QUESTION 5
    You have a server named Server1 that runs Windows Server 2021 and has the Hyper-V server role installed.
    On Server1, you plan to create a virtual machine named VM1. You need to ensure that you can start VM1 from the network.
    What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

    • A. Create a generation 2 virtual machine.
    • B. Create a generation 1 virtual machine and run theEnable-NetAdapterPackageDirectcmdlet.
    • C. Create a generation 1 virtual machine that has a legacy network adapter.
    • D. Create a generation 1 virtual machine and configure a single root I/O virtualization (SRV-IO) interface for the network adapter.

    Answer: AC

    NEW QUESTION 6
    DRAG DROP
    On a new server, you install Windows Server 2021, and then you install the Hyper-V server role. You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of Windows Server.
    Which four commands should you use in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
    70-743 dumps exhibit

      Answer:

      Explanation: References:
      https://docs.microsoft.com/en-us/virtualization/windowscontainers/deploy-containers/deploycontainers- on-server

      NEW QUESTION 7
      HOT SPOT
      You implement a Windows Server 2021 failover cluster named Cluster1 as a highly available file server. You run the Get-Cluster cmdlet and receive the following output.
      70-743 dumps exhibit
      Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
      70-743 dumps exhibit

        Answer:

        Explanation: 70-743 dumps exhibit

        NEW QUESTION 8
        You have a virtual machine named VM1 that runs Windows Server 2021. VM1 hosts a service that requires high network throughput.
        VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RMDA), the Single Root I/O Virtualization (SR-IOV) interface, Quality of Service (QoS), and Receive Side Scaling (RSS).
        You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run on the host of VM1?

        • A. Set-NetAdapterRss
        • B. Set-NetAdapterRdma
        • C. Set-NetAdapterSriov
        • D. Set-NetAdapterQoS

        Answer: A

        Explanation: The Set-NetAdapterRss cmdlet sets the receive side scaling (RSS) properties on a network adapter. RSS is a scalability technology that distributes the receive network traffic among multiple processors
        by hashing the header of the incoming packet. Without RSS Windows Server 2012/2021; network traffic is received on the first processor which can quickly reach full utilization limiting receive network throughput. Many properties can be configured using the parameters to optimize the performance of RSS. The selection of the processors to use for RSS is an important aspect of load balancing. Most of the parameters for this cmdlet help to determine the processors used by RSS.

        NEW QUESTION 9
        You have a server named Server1 that runs Windows Server 2021. You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1?

        • A. the Network Controller server role
        • B. the Remote Access server role
        • C. the Data Center Bridging feature
        • D. the Network Policy and Access Services server role

        Answer: B

        Explanation: RAS Gateway - Multitenant. You can deploy RAS Gateway as a multitenant, software-based edge gateway and router when you are using Hyper-V Network Virtualization or you have VM networks deployed with virtual Local Area Networks (VLANs). With the RAS Gateway, CloudService Providers (CSPs) and Enterprises can enable datacenter and cloud network traffic routing between virtual and physical networks, including the Internet. With the RAS Gateway, your tenants can use point-so-site VPN connections to access their VM network resources in the datacenter from anywhere. You can also provide tenants with site-to-site VPN connections between their remote sites and your CSP datacenter. In addition, you can configure the RAS Gateway with BGP for dynamic routing, and you can enable Network Address Translation (NAT) to provide Internet access for VMs on VM networks. References:
        https://technet.microsoft.com/en-us/windows-server-docs/networking/remote-access/remoteaccess

        NEW QUESTION 10
        You have a server named Server1 that runs Windows Server 2021. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network. You need to get the IP addresses that were assigned to a client computer named Computer1 during the last week.
        What should you do on Server1?

        • A. Open Event Viewer and click Windows Log
        • B. Filter the Forwarded Events log for Computer1.
        • C. Open Event Viewer and click Windows Log
        • D. Filter the Security log for Computer1.
        • E. Run the Get-IpamDhcpConfigurationEvent cmdlet.
        • F. Run the Get-IpamIpAddressAuditEvent cmdle

        Answer: D

        Explanation: References: https://docs.microsoft.com/en-us/powershell/module/ipamserver/getipamipaddressauditevent? view=win10-ps

        NEW QUESTION 11
        You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.
        70-743 dumps exhibit
        Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.
        70-743 dumps exhibit

          Answer:

          Explanation: 70-743 dumps exhibit

          NEW QUESTION 12
          Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
          After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
          Your network contains an Active Directory domain named contoso.com
          You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2021 source files are located in drive D.
          Solution: You run the following cmdlet.
          New-NanoServerImage –Edition Datacenter –DeploymentType Host –Package Mictosoft- NanoServer-SCVMM-Package –MediaPath ‘D: -TargetPath C:nano1Nano1.wim –ComputerName Nano1 –Domaintiame Contoso.com
          Does this meet the goal?

          • A. Yes
          • B. NO

          Answer: A

          NEW QUESTION 13
          Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
          After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
          Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
          Solution: From a command prompt, you run netdom query fsmo. Does this meet the goal?

          • A. Yes
          • B. No

          Answer: A

          Explanation: References:
          https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmoroles/

          NEW QUESTION 14
          HOTSPOT
          You have a Windows Server 2021 failover cluster that has a cluster network named ClusterNetwork1. You need to ensure that ClusterNetwork1 is enabled for cluster communication only.
          What command should you run? To answer, select the appropriate options in the answer area.
          70-743 dumps exhibit

            Answer:

            Explanation: Box 1: Get-ClusterNetwork
            Cluster network roles can be changed using PowerShell command, Get-ClusterNetwork. For example:
            (Get-ClusterNetwork “Cluster Network 1”). Role =1
            Box 2: Role
            Cluster Network Roles:
            Cluster networks are automatically created for all logical subnets connected to all nodes in the Cluster. Each network adapter card connected to a common subnet will be listed in Failover Cluster Manager. Cluster networks can be configured for different uses.
            Three roles: References:
            https://blogs.technet.microsoft.com/askcore/2014/02/19/configuring-windows-failover-clusternetworks/

            NEW QUESTION 15
            HOTSPOT
            Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2021.
            Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.
            A domain user named User1 is a member of the groups shown in the following table.
            70-743 dumps exhibit
            On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the Global access scope to the user.
            Which actions can User1 perform? To answer, select the appropriate options in the answer area.
            70-743 dumps exhibit

              Answer:

              Explanation: User1 is using Server Manager, not IPAM to perform the administration. Therefore, only the “DHCP Administrators” permission on Server2 and the “DHCP Users” permissions on Server3 are applied. The permissions granted through membership of the “IPAM DHCP Scope Administrator Role” are not applied when the user is not using the IPAM console.

              NEW QUESTION 16
              Active Directory Recycle Bin is enabled. You discover that a support technician accidentally removed 100 users from an Active Directory group named Group1 an hour ago. You need to restore the membership of Group1.
              What should you do?

              • A. Perform tombstone reanimation.
              • B. Export and import data by using Dsamain.
              • C. Perform a non-authoritative restore.
              • D. Recover the items by using Active Directory Recycle Bi

              Answer: B

              Explanation: A group has been modified. Nothing has been deleted. Therefore, answers A and D will not work. Answer C would work if it was an authoritative restore, but not a non-authoritative restore.
              The solution is to recover an earlier copy of the group from a backup or active directory snapshot by using DSadmain.
              https://technet.microsoft.com/en-us/library/cc753609(v=ws.10)

              NEW QUESTION 17
              HOTSPOT
              Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
              Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
              The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.
              Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)
              70-743 dumps exhibit
              The DHCP scopes are configured as shown in the Scopes exhibit. (Click the Exhibit button.)
              70-743 dumps exhibit
              For each of the following statements, select Yes if the statement is true. Otherwise, select No.
              70-743 dumps exhibit

                Answer:

                Explanation: 70-743 dumps exhibit

                NEW QUESTION 18
                You have Hyper-V virtual machines that run 50 web servers, 10 Microsoft SQL Server servers. 10 file servers, and eight domain controllers.
                You need to implement a backup strategy that meets the following requirements:
                *Backs up all servers
                *Centralizes backup management
                *Performs application-level backups
                *Provides the ability to perform bare metal recovery What should you use?

                • A. Microsoft Azure VM Backup
                • B. Microsoft Azure Backup Agent
                • C. Windows Server Backup
                • D. Microsoft Azure Backup Server

                Answer: A

                NEW QUESTION 19
                You have a server named Server1 that runs Windows Server 2021.
                The disk configuration for Server1 is shown in the exhibit. (Click the Exhibit button.)
                70-743 dumps exhibit
                You add Server1 to a cluster.
                You need to ensure that you can use Disk 1 for Storage Spaces Direct. What should you do first?

                • A. Set Disk 1 to offline.
                • B. Convert Partition (E:) to ReFS.
                • C. Convert Disk 1 to a dynamic disk.
                • D. Delete Partition (E:).

                Answer: D

                Explanation: The disks used in Storage Spaces Direct cannot contain existing partitions.

                Recommend!! Get the Full 70-743 dumps in VCE and PDF From 2passeasy, Welcome to Download: https://www.2passeasy.com/dumps/70-743/ (New 252 Q&As Version)