70-743 | Microsoft 70-743 Braindumps 2021

NEW QUESTION 1
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand-alone Hyper- V host named Server1 at a secondary location.
A virtual machine named VM1 runs on Cluster1.
You configure a Hyper-V Replica of VM1 to Server1. You need to perform a Test Failover of VM1.
Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management snap-in
• D. the configurehyperv.exe command
• E. the Disk Management snap-in
• F. the Failover Cluster Manager snap-in
• G. the Hyper-V Manager snap-in
• H. the Server Manager app

Answer: G

NEW QUESTION 2
Your network contains an Active Directory domain named contoso.com that contains a domain controller named DC1. All DNS servers for the network run BIND 10.
Your perimeter network contains a DHCP server named DHCP1 that runs Windows Server 2021. DHCP1 is a member of a workgroup named WORKGROUP. DHCP1 provides IP address leases to guests accessing the Wi-Fi network.
Several engineers access the network remotely by using a VPN connection to remote access server that runs Windows Server 2021. All of the VPN connections use certificate-based authentication and are subjects to access policies in Network Policy Server (NPS). Certificates are issued by an enterprise certification authority
(CA) named CA1.
All Windows computers on the network are activated by using Key Management Service (KMS). Onpremises users use Remote Desktop Services (RDS).
You plan to deploy IP Address Management (IPAM) to the network. Which action can you perform on the network by using IPAM?

• A. Audit authentication events from DC1.
• B. Create DHCP reservations on DHCP1.
• C. Audit certificate enrollment requests on CA1.
• D. Manage activations on the KMS serve

Answer: A

NEW QUESTION 3
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server1.
You need to manually start discovery of servers that IPAM can manage in contoso.com.
Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Answer:

Explanation: Step 1: Invoke-IpamServerProvisioning Choose a provisioning method
The Invoke-IpamGpoProvisioning cmdlet creates and links three group policies specified in the Domain parameter for provisioningrequired access settingson the server roles managed by the computer running the IP Address Management (IPAM) server.
Step 2: Add-IpamDiscoveryDomain Configure the scope of discovery
The Add-IpamDiscoveryDomain cmdlet adds an Active Directory discovery domain for an IP AddressManagement (IPAM) server. A discovery domain is a domain that IPAM searches to find infrastructure servers. An IPAM server uses the list of discovery domains to determine what type of servers to add. By default, IPAM discovers all domain controllers, Dynamic Host Configuration Protocol (DHCP) servers, and Domain Name System (DNS) servers.
Step 3: Start-ScheduledTask Start server discovery
To begin discovering servers on the network, click Start server discovery to launch the IPAM ServerDiscovery task or use the Start-ScheduledTask command.

NEW QUESTION 4
You have a server named Server1 that runs Windows Server 2021. The disks on Server1 are configured as shown in the following table:

Windows Server 2021 is installed in C:Windows.
On which two volumes can you enable data deduplication? Each correct answer presents a complete solution.

• A. C:
• B. D:
• C. E:
• D. F:
• E. G:

Answer: CE

Explanation: Volumes that are candidates for deduplication must conform to the following requirements: References:
https://technet.microsoft.com/en-us/library/hh831700(v=ws.11).aspx

NEW QUESTION 5
You deploy two servers that run Windows Server 2021. You install the Failovers Clustering feature on both servers. You need to create a workgroup cluster.
What should you do?

• A. Create matching local administrative accounts on both of the server
• B. Assign the same primary DNS suffix to both of the server
• C. Run the New-Cluster cmdlet and specify an administrative access point of None.
• D. Configure both of the server to be in a workgroup named Workgrou
• E. Configure the Cluster Service to log on as Network Servic
• F. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
• G. Create matching local administrative accounts on both of the server
• H. Assign the same primary DNS suffix to both of the server
• I. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
• J. Configure both of the server to be in a workgroup named Workgrou
• K. Configure the Cluster Service to log on as Network Servic
• L. Run the New-Cluster cmdlet and specify an administrative access point of None.

Answer: D

NEW QUESTION 6
Your network contains three Hyper-V hosts. You add all of the hosts to a cluster.
You need to create highly available storage spaces that connect to directly attached storage on the hosts.
Which cmdlet should you use?

• A. Update-ClusterVirtualMachineConfiguration
• B. Enable-ClusterStorageSpacesDirect
• C. Set-StoragePool
• D. Add-ClusterDisk

Answer: B

Explanation: The Enable-ClusterStorageSpacesDirect cmdlet enables highly available Storage Spaces that use directly attached storage Storage Spaces Direct (S2D) on a cluster.

NEW QUESTION 7
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two servers named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 have the Hyper-V server role installed.
An iSCSI SAN connects to the network.
You create a LUN on the SAN and configure both servers to connect to the iSCSI target.
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage.
You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.
Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management snap-in
• D. the configurehyperv.exe command
• E. the Disk Management snap-in
• F. the Failover Cluster Manager snap-in
• G. the Hyper-V Manager snap-in
• H. the Server Manager app

Answer: F

Explanation: References:
https://technet.microsoft.com/en-us/library/jj612868(v=ws.11).aspx https://technet.microsoft.com/en-us/library/jj863389.aspx
To implement certain scenarios for clustered virtual machines, the virtual machine storage and virtual hard disk file should be configured as Cluster Shared Volumes (CSV). To configure a disk in clustered storage as a CSV volume, you can use Failover Cluster Manager or the Windows PowerShellAdd-ClusterSharedVolume cmdlet. For detailed planning considerations and steps to create CSV, see Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster.

NEW QUESTION 8
HOT SPOT
You have a Hyper-V host named Server1 that runs Windows Server 2021.
You deploy a virtual machine named VM1 to Server1. VM1 runs Windows Server 2021. You need to ensure that you can install the Hyper-V server role on VM1.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 9
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. IPAM is configured to use the Group Policy based provisioning method. The prefix for the IPAM Group Policy objects (GPOs) is IP.
From Group Policy Management, you manually rename the IPAM GPOs to have a prefix of IPAM. You need to modify the GPO prefix used by IPAM.
What should you do?

• A. Click Configure server discovery in Server Manager.
• B. Run the Set-IpamConfiguration cmdlet.
• C. Run the Invoke-IpamGpoProvisioning cmdlet.
• D. Click Provision the IPAM server in Server Manage

Answer: B

Explanation: The Set-IpamConfiguration cmdlet modifies the configuration for the computer that runs the IPAM server.
The -GpoPrefix<String> parameter specifies the unique Group Policy object (GPO) prefix name that IPAM uses to create the group policy objects. Use this parameter only when the value of the ProvisioningMethod parameter is set to Automatic.
References:
https://technet.microsoft.com/en-us/library/jj590816.aspx

NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
You have a server named Server1 that runs Windows Server 2021. Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.
Solution: You create a performance counter data collector. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 11
DRAG DROP
You are preparing an image of Windows Server 2021.
The image is missing the driver foe a network adapter that is required in your environment. You need to ensure that the image contains the network adapter driver.
Which three cmdlets should you use in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them m the correct order.

Answer:

Explanation:

NEW QUESTION 12
You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2021.
You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2.
You need to configure Server1 to use Server2 as a RADIUS server. What should you do?

• A. From the Connection Manager Administration Kit, create a Connection Manager profile.
• B. From Routing and Remote Access, configure the authentication provider.
• C. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.
• D. From Server Manager, create an Access Polic

Answer: D

Explanation: http://www.nyazit.com/configure-network-policy-server-2021/

NEW QUESTION 13
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2021 and a two-node scale-out file server cluster named Cluster1.
A virtual machine named VM1 runs on Server1. You need to migrate the storage on VM1 to Cluster1. Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management snap-in
• D. the configurehyperv.exe command
• E. the Disk Management snap-in
• F. the Failover Cluster Manager snap-in
• G. the Hyper-V Manager snap-in
• H. the Server Manager app

Answer: G

NEW QUESTION 14
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Each server has an operating system disk and four data disks. All of the disks are locally attached SATA disks.
Each disk is a basic disk, is initialized as an MBR disk, and has a single NTFS volume.
You plan to implement Storage Spaces Direct by using the data disks on Server1 and Server2. You need to prepare the data disks for the Storage Spaces Direct implementation.
What should you do?

• A. Format the volumes on the data disks as exFAT.
• B. Initialize the data disks as GPT disks and create a ReFS volume on each disk.
• C. Convert the data disks to dynamic disks.
• D. Delete the volumes from the data disk

Answer: D

NEW QUESTION 15
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2021. You plan to deploy several shielded virtual machines on Server1.
You deploy a Host Guardian on a new server.
You need to ensure that Server1 can host shielded virtual machines. What should you do first?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessor cmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: G

Explanation: Installing Host Guardian Service (HGS) Role
On a machine running Windows Server 2021, install the Host Guardian Service role using Server Manager or Windows PowerShell.
From the command line issue the following command:
Install-WindowsFeature HostGuardianServiceRole –IncludeManagementTools References:
https://blogs.technet.microsoft.com/datacentersecurity/2021/03/16/windows-server-2021-andhost- guardian-service-for-shielded-vms/

NEW QUESTION 16
You have 2000 devices, One hundred of the devices are mobile devices that have physical addresses beginning with 98-5F.
You have a DHCP server named Server1.
You need to ensure that the mobile devices register their host name by using a DNS suffix of mobile.contoso.com

• A. From the properties of Scopte1, Modify the Conflict detection attempts setting.
• B. From the properties of Scope1, Configure Name Protection.
• C. From the Properties of IPV4, configure the bindings.
• D. From IPV4, create a new filter.
• E. From the properties of Scope1, create an exclusion range.
• F. From IPv4, run the DHCP Policy Configuration Wizard.
• G. From Control Panel, modify the properties of Ethernet.
• H. From Scope1, create a reservation

Answer: F

NEW QUESTION 17
HOT SPOT
You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2021. Server1 and Server2 are nodes in a failover cluster named FC1. Server3 and Server4 are nodes in a failover cluster named FC2.
You add the cluster roles show in the following table.

You add a file share named Share1 to FS1. You add a file share named Share2 to FS2.
Which UNC paths can you use to access each share? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 18
You have a DHCP server named Server1.
Server1 has an IPv4 scope that contains 100 addresses for a subnet named Subnet! Subnet1 provides guest access to the Internet. There are never more than 20 client computers on Subnet1 simultaneously; however, the computers that connect to Subnet 1 are rarely the same computers. You discover that some client computers are unable to access the network. The computers that have the issue have IP addresses in the range of 169.254.0.0/16.
You need to ensure that all of the computers can connect successfully to the network to access the Internet.
What should you do?

• A. Create a new scope that uses IP addresses in the range of 169.254.0.0/16.
• B. Modify the scope options.
• C. Modify the lease duration.
• D. Configure Network Access Protection (NAP) integration on the existing scop

Answer: D

NEW QUESTION 19
HOT SPOT
You have a RADIUS server named RADIUS1. RADIUS1 is configured to use an IP address of 172.23.100.101.
You add a wireless access point (wap) named WAP-Secure to your network. You configure WAPSecure to use an IP address of 10.0.100.101.
You need to ensure that WAP-Secure can authenticate to RADIUS1 by using a shared secret key. What command should you run? To answer, select the appropriate options in answer area.

Answer:

Explanation: