AZ-102 | Microsoft AZ-102 Braindumps 2021

NEW QUESTION 1
HOT SPOT
You need to identify the storage requirements for Contoso.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

Answer:

Explanation:
Box 1: Yes
Contoso is moving the existing product blueprint files to Azure Blob storage.
Use unmanaged standard storage for the hard disks of the virtual machines. We use Page Blobs for these.
Box 2: No
Box 3: No

Case Study: 3
Mix Questions

NEW QUESTION 2
You plan to deploy a site-to-site VPN connection from on-premises network to your Azure environment. The VPN connection will be established to the VNET01-USEA2 virtual network. You need to create the required resources in Azure for the planned site-to-site VPN. The solution must minimize costs.
What should you do from the Azure portal?
NOTE: This task may a very long time to complete. You do NOT need to wait for the deployment to complete this task successfully.

Answer:

Explanation: We create a VPN gateway. Step 1:
On the left side of the portal page, click + and type 'Virtual Network Gateway' in search. In Results, locate and click Virtual network gateway.
Step 2:
At the bottom of the 'Virtual network gateway' page, click Create. This opens the Create virtual network gateway page.
Step 3:
On the Create virtual network gateway page, specify the values for your virtual network gateway. Gateway type: Select VPN. VPN gateways use the virtual network gateway type VPN.
Virtual network: Choose the existing virtual network VNET01-USEA2
Gateway subnet address range: You will only see this setting if you did not previously create a gateway subnet for your virtual network.
Step 4:
Select the default values for the other setting, and click create.

The settings are validated and you'll see the "Deploying Virtual network gateway" tile on the dashboard. Creating a gateway can take up to 45 minutes.
Note: This task may take a very long time to complete. You do NOT need to wait for the deployment to complete this task successfully.
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-site-to-site-resourcemanager- portal
Case Study: 7 Contoso Case Study Overview
Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York.
The Montreal office has 2,000 employees. The Seattle office has 1,000 employees. The New York office has 200 employees.
All the resources used by Contoso are hosted on-premises.
Contoso creates a new Azure subscription. The Azure Active Directory (Azure AD) tenant uses a domain named contoso.onmicrosoft.com. The tenant uses the P1 pricing tier.
Existing Environment
The network contains an Active Directory forest named contoso.com. All domain controllers are configured as DNS servers and host the contoso.com DNS zone.
Contoso has finance, human resources, sales, research, and information technology departments. Each department has an organizational unit (OU) that contains all the accounts of that respective department. All the user accounts have the department attribute set to their respective department.
New users are added frequently. Contoso.com contains a user named User1. All the offices connect by using private links.
Contoso has data centers in the Montreal and Seattle offices. Each data center has a firewall that can be configured as a VPN device.
All infrastructure servers are virtualized. The virtualization environment contains the servers in the following table.

Contoso uses two web applications named App1 and App2. Each instance on each web application requires 1GB of memory.
The Azure subscription contains the resources in the following table.

The network security team implements several network security groups (NSGs). Planned Changes
Contoso plans to implement the following changes:
• Deploy Azure ExpressRoute to the Montreal office.
• Migrate the virtual machines hosted on Server1 and Server2 to Azure.
• Synchronize on-premises Active Directory to Azure Active Directory (Azure AD).
• Migrate App1 and App2 to two Azure web apps named webApp1 and WebApp2..
Technical requirements
Contoso must meet the following technical requirements:
• Ensure that WebApp1 can adjust the number of instances automatically based on the load and can scale up to five instance*.
• Ensure that VM3 can establish outbound connections over TCP port 8080 to the applications servers in the Montreal office.
• Ensure that routing information is exchanged automatically between Azure and the routers in the Montreal office.
• Enable Azure Multi-Factor Authentication (MFA) for the users in the finance department only.
• Ensure that webapp2.azurewebsites.net can be accessed by using the name app2.contoso.com.
• Connect the New Your office to VNet1 over the Internet by using an encrypted connection.
• Create a workflow to send an email message when the settings of VM4 are modified.
• Cre3te a custom Azure role named Role1 that is based on the Reader role.
• Minimize costs whenever possible.

NEW QUESTION 3
You plan to use the Azure Import/Export service to copy files to a storage account.
Which two files should you create before you prepare the drives for the import job? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. an XML manifest file
• B. a driveset CSV file
• C. a dataset CSV file
• D. a PowerShell PS1 file
• E. a JSON configuration file

Answer: BC

Explanation: B: Modify the driveset.csv file in the root folder where the tool resides.
C: Modify the dataset.csv file in the root folder where the tool resides. Depending on whether you want to import a file or folder or both, add entries in the dataset.csv file
References: https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-datato- files

NEW QUESTION 4
You have five Azure virtual machines that run Windows Server 2021.
You have an Azure load balancer named LB1 that provides load balancing se
You need to ensure that visitors are serviced by the same web server for each request. What should you configure?

• A. Floating IP (direct server return) to Disable
• B. Session persistence to Client IP
• C. a health probe
• D. Session persistence to None

Answer: B

Explanation: You can set the sticky session in load balancer rules with setting the session persistence as the client IP.
References:
https://cloudopszone.com/configure-azure-load-balancer-for-sticky-sessions/

NEW QUESTION 5
HOT SPOT
You have an Azure Migrate project that has the following assessment properties: Target location: East US
Storage redundancy: Locally redundant. Comfort factor: 2.0
Performance history: 1 month Percentile utilization: 95th
Pricing tier: Standard Offer: Pay as you go
You discover the following two virtual machines:
A virtual machine named VM1 that runs Windows Server 2021 and has 10 CPU cores at 20 percent utilization
A virtual machine named VM2 that runs Windows Server 2012 and has four CPU cores at 50 percent utilization
How many CPU cores will Azure Migrate recommend for each virtual machine? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation: Box 2: 4
4 *0.50 * 0.95* 2 = 3.8
Note: The number of cores in the machines must be equal to or less than the maximum number of cores (128 cores) supported for an Azure VM.
If performance history is available, Azure Migrate considers the utilized cores for comparison. If a comfort factor is specified in the assessment settings, the number of utilized cores is multiplied by the comfort factor.
If there's no performance history, Azure Migrate uses the allocated cores, without applying the comfort factor.
References:
https://docs.microsoft.com/en-us/azure/migrate/concepts-assessment-calculation

NEW QUESTION 6
HOT SPOT
You have an Azure subscription named Subscription1 that contains a virtual network named VNet1. You add the users in the following table.

Which user can perform each configuration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation: Box 1: User1 and User3 only.
The Owner Role lets you manage everything, including access to resources. The Network Contributor role lets you manage networks, but not access to them. Box 2: User1 and User2 only
The Security Admin role: In Security Center only: Can view security policies, view security states, edit security policies, view alerts and recommendations, dismiss alerts and recommendations.
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles

NEW QUESTION 7
Which blade should you instruct the finance department auditors to use?

• A. Cost analysis
• B. Usage + quotas
• C. External services
• D. Payment methods

Answer: B

Explanation: Subscription costs are based on usage. Microsoft Azure limits are also called quotas.
Scenario: During the testing phase, auditors in the finance department must be able to review all Azure costs from the past week.
Incorrect Answers:
C: External services are published by third party software vendors in the Azure marketplace. References: https://docs.microsoft.com/en-us/azure/azure-subscription-service-limits

NEW QUESTION 8
DRAG DROP
You have an Azure subscription that contains an Azure Service Bus named Bus1.
Your company plans to deploy two Azure web apps named App1 and App2. The web apps will create messages that have the following requirements:
Each message created by App1 must be consumed by only a single consumer Each message created by App2 will be consumed by multiple consumers.
Which resource should you create for each web app? To answer, drag the appropriate resources to the correct web apps. Each resource may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 9
You plan to support many connections to your company's automatically uses up to five instances when CPU utilization on the instances exceeds 70 percent for 10 minutes. When CPU utilization decreases, the solution must automatically reduce the number of instances.
What should you do from the Azure portal?

Answer:

Explanation: Step 1:
Locate the Homepage App Service plan Step 2:
Click Add a rule, and enter the appropriate fields, such as below, and the click Add. Time aggregation: average
Metric Name: Percentage CPU Operator: Greater than Threshold 70
Duration: 10 minutes Operation: Increase count by Instance count: 4

Step 3:
We must add a scale in rule as well. Click Add a rule, and enter the appropriate fields, such as below, then click Add.
Operator: Less than
Threshold 70
Duration: 10 minutes Operation: Decrease count by Instance count: 4 References:
https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-setsautoscale- portal
https://docs.microsoft.com/en-us/azure/monitoring-and-diagnostics/insights-autoscale-bestpractices

NEW QUESTION 10
HOT SPOT
You have an Azure virtual network named VNet1 that connects to your on-premises network by using
a site-to-site VPN. VMet1 contains one subnet named Subnet1.
Subnet1 is associated to a network security group (NSG) named NSG1. Subnet1 contains a basic internal load balancer named ILB1. ILB1 has three Azure virtual machines in the backend pool. You need to collect data about the IP addresses that connects to ILB1. You must be able to run interactive queries from the Azure portal against the collected data.
What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation: Box 1: An Azure Log Analytics workspace
In the Azure portal you can set up a Log Analytics workspace, which is a unique Log Analytics environment with its own data repository, data sources, and solutions
Box 2: ILB1
References:
https://docs.microsoft.com/en-us/azure/log-analytics/log-analytics-quick-create-workspace https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-standard-diagnostics

NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario goals. Some question sets might have more than one correct solution, while others
ion in the series contains a unique solution that might meet the stated not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure web app named Appl. App1 runs in an Azure App Service plan named Plan1. Plan1 is associated to the Free pricing tier.
You discover that App1 stops each day after running continuously for 60 minutes. You need to ensure that App1 can run continuously for the entire day.
Solution: You add a triggered WebJob to App1. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: You need to change to Basic pricing Tier.
Note: The Free Tier provides 60 CPU minutes / day. This explains why App1 is stops. The Basic tier has no such cap.
References:
https://azure.microsoft.com/en-us/pricing/details/app-service/windows/

NEW QUESTION 12
You create a new replication policy in Azure for the physical servers. You successfully complete the following actions:
Create and configure a Recovery Services vault.
Ensure Internet connectivity.
Ensure that the required URLs are reachable.
Ensure that the host server requirements are met.
Ensure that the servers marked for replication comply with the requirements of the Azure virtual machines.
You need to replicate the on-premises servers to Azure.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

Answer:

Explanation: Step 2: Deploy the OVF template Set up the source environment.
Download the OVF template for the configuration server, and import the template in VMware.
Note: Open Virtualization Format (OVF) template is an industry standard software distribution model for virtual machine templates. Starting January 2021, configuration server for the VMware to Azure scenario will be available to all our customers as an OVF template.
Step 3: Associate the configuration server to the replication policy Associate the replication policy with your on-premises configuration server. Step 4: Enable replication
References:
https://docs.microsoft.com/en-us/azure/site-recovery/vmware-azure-set-up-replication

NEW QUESTION 13
You have an Azure DNS zone named adatum.com. You need to delegate a subdomain named research.adatum.com to a different DNS server in Azure. What should you do?

• A. Create an PTR record named research in the adatum.com zone.
• B. Create an NS record named research in the adatum.com zone.
• C. Modify the SOA record of adatum.com.
• D. Create an A record named “.research in the adatum.com zon

Answer: D

Explanation: Configure A records for the domains and sub domains.
References: http://www.stefanjohansson.org/2012/12/how-to-configure-custom-dns-names-formultiple- subdomain-based-azure-web-sites/

NEW QUESTION 14
You need to recommend an identify solution that meets the technical requirements. What should you recommend?

• A. federated single-on (SSO) and Active Directory Federation Services (AD FS)
• B. password hash synchronization and single sign-on (SSO)
• C. cloud-only user accounts
• D. Pass-through Authentication and single sign-on (SSO)

Answer: A

Explanation: Active Directory Federation Services is a feature and web service in the Windows Server Operating System that allows sharing of identity information outside a company’s network.
Scenario: Technical Requirements include:
Prevent user passwords or hashes of passwords from being stored in Azure.
References: https://www.sherweb.com/blog/active-directory-federation-services/

NEW QUESTION 15
You plan to grant the member of a new Azure AD group named crop 75099086 the right to delegate administrative access to any resource in the resource group named 7509086.
You need to create the Azure AD group and then to assign the correct to e to the group. The solution must use the principle of least privilege and minimize the number of role assignments.
What should you do from the Azure portal?

Answer:

Explanation: Step 1:
Click Resource groups from the menu of services to access the Resource Groups blade

Step 2:
Click Add (+) to create a new resource group. The Create Resource Group blade appears. Enter corp7509086 as the Resource group name, and click the Create button.

Step 3: Select Create.
Your group is created and ready for you to add members. Now we need to assign a role to this resource group scope. Step 4:
Choose the newly created Resource group, and Access control (IAM) to see the current list of role assignments at the resource group scope. Click +Add to open the Add permissions pane.

Step 5:
In the Role drop-down list, select a role Delegate administration, and select Assign access to: resource group corp7509086

References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/role-assignments-portal https://www.juniper.net/documentation/en_US/vsrx/topics/task/multi-task/security-vsrx-azuremarketplace- resource-group.html

Case Study: 11
Mix Questions Set E (Security Identities)

NEW QUESTION 16
SIMULATION
Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.






When you are finished performing all the tasks, click the ‘Next’ button.
Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
Overview
The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
To start the lab
You may start the lab by clicking the Next button.
You plan to move backup files and documents from an on-premises Windows file server to Azure Storage. The backup files will be stored as blobs.
You need to create a storage account named corpdata7523690n2. The solution must meet the following requirements:
Ensure that the documents are accessible via drive mappings from Azure virtual machines that run Windows Server 2021.
Provide the highest possible redundancy for the documents. Minimize storage access costs.
What should you do from the Azure portal?

Answer:

Explanation: Step 1: In the Azure portal, click All services. In the list of resources, type Storage Accounts. As you begin typing, the list filters based on your input. Select Storage Accounts.
Step 2: On the Storage Accounts window that appears, choose Add. Step 3: Select the subscription in which to create the storage account.
Step 4: Under the Resource group field, select Create New. Create a new Resource

Step 5: Enter a name for your storage account: corpdata7523690n2
Step 6: For Account kind select: General-purpose v2 accounts (recommended for most scenarios) General-purpose v2 accounts is recommended for most scenarios. . General-purpose v2 accounts deliver the lowest per-gigabyte capacity prices for Azure Storage, as well as industry-competitive transaction prices.
Step 7: For replication select: Read-access geo-redundant storage (RA-GRS)
Read-access geo-redundant storage (RA-GRS) maximizes availability for your storage account. RA-GRS provides read-only access to the data in the secondary location, in addition to geo-replication across
two regions.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-quickstart-create-account https://docs.microsoft.com/en-us/azure/storage/common/storage-account-overview

NEW QUESTION 17
Note: This question is part of a series of Questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these Questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1. Solution: From the RG1 blade, you click Deployments.
Does this meet the goal?

• A. Yes
• B. No

Answer: A