HPE0-S56 | HPE0-S56 Vce 2021

NEW QUESTION 1
Match the industry trend with its use case.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Efficiently user server, storage, and networking resources – Virtualization
Externalize the infrastructure and eliminate data center capital expenditures – Cloud computing
Share a common resource or execute a common application across multiple servers for high availability and/or load balancing – Clustering
Deploy workloads at cloud-like speed on an HPE factory-integrated infrastructure – Converged system

NEW QUESTION 2
A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.
How should the customer configure their network?

• A. Isolate the management network from production traffic
• B. Isolate the SAN on a public network and use a virtual private network (VPN) for secure data
• C. Configure IRF on the switches
• D. Configure in-band management to manage the switches through gigabit Ethernet ports

Answer: A

NEW QUESTION 3
You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?

• A. at the top of the rack with the cables running between the RETMA rails
• B. horizontally on extension bars mounted directly to the frame for improved clearance
• C. in the bottom bay of the rack with the outlets facing the front
• D. vertically, side by side on both sides of the rack with the outlets facing the center

Answer: D

NEW QUESTION 4
A customer plans to use HPE ProLiant servers for an application that requires low latency for all components. Which workload profile should the customer use?

• A. Mission Critical
• B. Virtualization – Max Performance
• C. I/O Throughput
• D. Transactional Application Processing

Answer: A

NEW QUESTION 5
A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Server model – HPE Proliant DL380 Gen10 Storage model – HPE MSA 2040

NEW QUESTION 6
A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost. Which HPE solution meets this customer’s requirements?

• A. HPE Nimble Storage
• B. HPE SimpliVity
• C. HPE MSA
• D. HPE StoreVirtual VSA

Answer: C

NEW QUESTION 7
You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)

• A. Room temperature must not exceed 35 °C (95 °F)
• B. Rack tie kit should be installed on the rack for proper airflow
• C. UPSs should be installed at the top of the rack for top mounted power feed
• D. There must be at least a 10 cm (4 in) clearance space at the front and back of the components within the racks
• E. Rack doors must be unlocked for easy component removal and maintenance

Answer: AD

NEW QUESTION 8
You are troubleshooting server issues and need to troubleshoot when online and offline. Which HPE tool should you use?

• A. Integrated Management Log
• B. Insight Diagnostics
• C. Insight Remote Support
• D. Active Health System

Answer: B

NEW QUESTION 9
You are configuring a FlexFabric switch for a customer environment. The customer has requested specific SFP+ transceivers, power options, and cables.
Which HPE tool enables you to select and configure a switch according to precise specifications?

• A. Single Point of Connectivity Knowledge (SPOCK)
• B. Networking Online Configurator
• C. One Config Simple (OCS)
• D. Switch Selector

Answer: C

NEW QUESTION 10
Why is RAID 6 the best option for a large RAID set for archive storage on large-capacity drives?

• A. to reduce risk during volume rebuild
• B. to increase write performance on the volume
• C. to maximize capacity of the volume
• D. to reduce drive wear

Answer: A

NEW QUESTION 11
You are installing a data center switch.
Which methods are recommended to configure the switch? (Choose two.)

• A. Use out-of-band management with a dedicated management connection
• B. Use in-band management with an IP address and subnet mask that is reachable on the management network
• C. Use out-of-band management and keep the default settings
• D. Use in-band management and configure the AUX0 interface for scheme authentication

Answer: AB

NEW QUESTION 12
A customer needs Layer 2 switches that provide basic functionality. In the future, this customer might need to use the switches’ CLI to configure VLAN and STP features.
Which category of the switches does meet the customer’s needs?

• A. unmanaged
• B. managed
• C. VLAN-based
• D. software distributed switch

Answer: B

NEW QUESTION 13
A customer needs to virtualize their storage across physical servers and storage environments. Which HPE solution meets the customer’s needs?

• A. Nimble CS3000
• B. StoreVirtual 4335
• C. StoreVirtual VSA
• D. MSA 2050

Answer: C

NEW QUESTION 14
You are installing additional components to a server.
Which HPE resource provides Quickspecs that verify the compatibility of the server hardware with the server?

• A. iQuote Universal
• B. Smart Selling tool
• C. Product Bulletin
• D. SPOCK

Answer: C

NEW QUESTION 15
A customer needs to enable HPE Proactive Care and automated case creation for server hardware failures in their OneView environment.
Which step do you need to complete in OneView to accomplish these tasks?

• A. Enable remote support from the Settings page.
• B. Apply the OneView Advanced monitoring license.
• C. Add the hosts to the managed devices group.
• D. Configure proactive scan reports.

Answer: A

NEW QUESTION 16
A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer’s requirements?

• A. Nimble CS1000
• B. Nimble SFA
• C. Nimble AF1000
• D. Nimble AF5000

Answer: B

NEW QUESTION 17
A customer is standardized on high-density, rack-mounted servers. They have an application that requires 3 six-drive RAID6 groups and redundant 10 Gb NICs.
What is the highest-density server that meets these customer requirements?

• A. DL580 Gen10
• B. DL360 Gen10
• C. DL380 Gen10
• D. BL460c Gen10

Answer: C

NEW QUESTION 18
A customer has an existing environment that contains a mixture of network vendors. The customer wants to manage all devices using a single interface.
What should the customer use to manage the devices?

• A. Central Management Console
• B. Intelligent Management Center
• C. Aruba Central
• D. OneView

Answer: B

NEW QUESTION 19
A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years.
Which HPE ProLiant server solution meets the customer’s requirements?

• A. HPE ProLiant DL560 Gen10 with LFF SAS drives
• B. HPE ProLiant DL380 Gen10 with LFF SAS drives
• C. HPE ProLiant ML110 with SFF SAS drives
• D. HPE ProLiant DL560 Gen9 with SFF SAS drives

Answer: B

NEW QUESTION 20
A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality.
Which HPE product family will meet this customer’s needs?

• A. Arista
• B. Altoline
• C. Aruba
• D. FlexFabric

Answer: D

NEW QUESTION 21
You are installing a HPE MSA storage system and need to connect the power cooling module (PCM). What should you do to ensure power redundancy?

• A. Ensure that a physical service processor is properly connected to each PCM
• B. Verify that each cooling fan is cabled to a separate controller
• C. Connect each PCM within a shelf to a different power distribution unit (PDU)
• D. Connect redundant power cords from the PCM controller to independent power supplies

Answer: C

NEW QUESTION 22
......