MD-100 | Far Out MD-100 Cram 2021

NEW QUESTION 1

You plan to deploy Windows 10 to 100 secure computers.
You need to select a version of Windows 10 that meets the following requirements:
Uses Microsoft Edge as the default browser
Minimizes the attack surface on the computer
Supports joining Microsoft Azure Active Directory (Azure AD)
Only allows the installation of applications from the Microsoft Store
What is the best version to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.

• A. Windows 10 Pro in S mode
• B. Windows 10 Home in S mode
• C. Windows 10 Pro
• D. Windows 10 Enterprise

Answer: C

Explanation:
References:
https://www.microsoft.com/en-za/windows/compare

NEW QUESTION 2

Your network contains an Active Directory domain named contoso.com. The domain contains named Computer1 that runs Windows 10.
On Computer1, you create an NTFS folder and assign Full control permissions to Everyone. You share the folder as Share1 and assign the permissions shown in the following table.

When accessing Share1, which two actions can be performed by User1 but not by User2? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. Delete a file created by another user.
• B. Set the permissions for a file.
• C. Rename a file created by another user.
• D. Take ownership of file.
• E. Copy a file created by another user to a subfolder.

Answer: BD

Explanation:
References:
https://www.varonis.com/blog/ntfs-permissions-vs-share/

NEW QUESTION 3

A user has a computer that runs Windows 10.
When the user connects the computer to the corporate network, the user cannot access the internal corporate servers. The user can access servers on the Internet.
You run the ipconfig command and receive the following output.

You send a ping request and successfully ping the default gateway, the DNS servers, and the DHCP server. Which configuration on the computer causes the issue?

• A. the DNS servers
• B. the IPv4 address
• C. the subnet mask
• D. the default gateway address

Answer: A

NEW QUESTION 4

You have 20 computers that run Windows 10. The computers are in a workgroup.
You need to create a local user named Admin1 on all the computers. Admin1 must be a member of the Remote Management Users group.
What should you do?

• A. From Windows Configuration Designer, create a provisioning package, and then run the provisioning package on each computer.
• B. Create a script that runs the New-ADUser cmdlet and the Set-AdGroup cmdlet.
• C. Create a Group Policy object (GPO) that contains the Local User Group Policy preference.
• D. Create a script that runs the New-MsolUser cmdlet and the Add-ADComputerServiceAccount cmdlet.

Answer: C

Explanation:
References:
https://blogs.technet.microsoft.com/askpfeplat/2021/11/06/use-group-policy-preferences-to-manage-the-local-ad

NEW QUESTION 5

You have a file named Reg1.reg that contains the following content.

What is the effect of importing the file?

• A. A key named command will be renamed as notepad.exe.
• B. In a key named Notepad, the command value will be set to @="notepad.exe".
• C. In a key named command, the default value will be set to notepad.exe.

Answer: B

NEW QUESTION 6

You have a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com that contain the users shown in the following table.

You have a computer named Computer1 that runs Windows 10.

User1 joins Computer1 to Azure AD by using user1@contoso.com.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 7

You have a computer named Computer1 that runs Windows 10 and is joined to an Active Directory domain named adatum.com.
A user named Admin1 signs in to Computer1 and runs the whoami command as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 8

You need to sign in as LocalAdmin on Computer11. What should you do first?

• A. From the LAPS UI tool, view the administrator account password for the computer object of Computer11.
• B. From Local Security Policy, edit the policy password settings on Computer11.
• C. From the LAPS UI tool, reset the administrator account password for the computer object of Computer11.
• D. From Microsoft Intune, edit the policy password settings on Computer11.

Answer: A

Explanation:
References:
https://technet.microsoft.com/en-us/mt227395.aspx

NEW QUESTION 9

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that runs Windows 10. The computer contains a folder. The folder contains sensitive data.
You need to log which user reads the contents of the folder and modifies and deletes files in the folder.
Solution: From the properties of the folder, you configure the Auditing settings and from Audit Policy in the local Group Policy, you configure Audit object access.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
References:
https://www.netwrix.com/how_to_detect_who_changed_file_or_folder_owner.html

NEW QUESTION 10

You need to implement a solution to configure the contractors’ computers.
What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/windows/configuration/provisioning-packages/provisioning-install-icd

NEW QUESTION 11

You have a computer named Computer1 that runs Windows 10. Computer1 contains a folder named Data on drive C. The Advanced Security Settings for the Data folder are shown in the exhibit. (Click the Exhibit tab.)
You share C:Data as shown in the following table. User1 is a member of the Users group.
Administrators are assigned Full control NTFS permissions to C:Data.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 12

You have a computer that runs Windows 10.
You discover that Windows updates are failing to install on the computer.
You need to generate a log file that contains detailed information about the failures. Which cmdlet should you run?

• A. Get–LogProperties
• B. Get–WindowsErrorReporting
• C. Get–WindowsUpdateLog
• D. Get–WinEvent

Answer: C

Explanation:
References:
https://docs.microsoft.com/en-us/powershell/module/windowsupdate/get-windowsupdatelog?view=win10-ps

NEW QUESTION 13

You have a computer named Computer1 that runs Windows 10.
On Computer1, you create the local users shown in the following table.

Which three user profiles will persist after each user signs out? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. User1
• B. User2
• C. User3
• D. User4
• E. User5

Answer: ADE

NEW QUESTION 14

You need to recommend a solution to monitor update deployments. What should you include in the recommendation?

• A. Windows Server Update (WSUS)
• B. the Update Management solution in Azure Automation
• C. the Update Compliance solution in Azure Log Analytics
• D. the Azure Security Center

Answer: C

Explanation:
References:
https://docs.microsoft.com/en-us/windows/deployment/update/update-compliance-monitor

NEW QUESTION 15

You have a computer named LON-CL1.Adatum.com that runs Windows 10.
From Event Viewer, you create a custom view named View1 that has the following filter:
User: User1
Logged: Any time
Event logs: System
Computer: LON-CL1
Event IDs: 10000 – 11000
Event level: Error, Verbose
You open Event Viewer and discover the event shown in the exhibit. (Click the Exhibit tab.)

The event does not appear in View1.
You need to ensure that the event appears in View1. What should you do?

• A. Add a Task Category setting to the filter.
• B. Add the computer account to the Event Log Readers group.
• C. Create an event subscription.
• D. Modify the Computer setting in the filter.

Answer: A

Explanation:
References:
https://www.techrepublic.com/article/how-to-use-custom-views-in-windows-10s-event-viewer/

NEW QUESTION 16

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021 and a computer named Computer1 that runs Windows 10.
Server1 contains a share named Backup. All users can read and write data in Backup.
On Monday at 13:00, you configure Backup and Restore (Windows 7) on Computer1 to use the following settings:
Backup Destination:\Server1Backup
What do you want to back up?:Local Disk (D:), Include a system image of drives: System Reserved, (C:)
Schedule: Daily at 23:00
You need to identify how many backups will be available on Thursday at 17:00.
What should you identify? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://www.windowscentral.com/how-make-full-backup-windows-10#create_system_image_windows10https:/

NEW QUESTION 17

Your company has a wireless access point that uses WPA2-Enterprise. You need to configure a computer to connect to the wireless access point. What should you do first?

• A. Create a provisioning package in Windows Configuration Designer.
• B. Request a passphrase.
• C. Request and install a certificate.
• D. Create a Connection Manager Administration Kit (CMAK) package.

Answer: B

Explanation:
References:
https://support.microsoft.com/en-za/help/17137/windows-setting-up-wireless-network

NEW QUESTION 18

You have a computer named Computer1 that runs Windows 10.
You need to configure User Account Control (UAC) to prompt administrators for their credentials. Which settings should you modify?

• A. Administrators Properties in Local Users and Groups
• B. User Account Control Settings in Control Panel
• C. Security Options in Local Group Policy Editor
• D. User Rights Assignment in Local Group Policy Editor

Answer: C

Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/identity-protection/user-account-control/user-account-contro

NEW QUESTION 19

You have a computer that runs Windows 10. The computer contains a folder named C:ISOs that is shared in ISOs.
You run several commands on the computer as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 20

Your company has an isolated network used for testing. The network contains 20 computers that run Windows 10. The computers are in a workgroup. During testing, the computers must remain in the workgroup.
You discover that none of the computers are activated.
You need to recommend a solution to activate the computers without connecting the network to the Internet. What should you include in the recommendation?

• A. Volume Activation Management Tool (VAMT)
• B. Key Management Service (KMS)
• C. Active Directory-based activation
• D. the Get-WindowsDeveloperLicense cmdlet

Answer: B

Explanation:
References:
https://docs.microsoft.com/en-us/windows/deployment/volume-activation/activate-using-key-management-servi

NEW QUESTION 21
......