N10-006 | Actual N10-006 Exam Questions and Answers 2021

NEW QUESTION 1
A technician has prolonged contact with a thermal compound. Which of the following resources should be consulted?

• A. HCL
• B. MSDS
• C. SLA
• D. HVAC

Answer: B

Explanation: MSDS stands forMaterial Safety Data Sheet. An MSDS is a health and safety document that contains information on the potential hazards of working with a chemical product and how to work safely with the chemical product.
In this question, the thermal compound is a chemical product so the MSDS will provide information about the effects of prolonged contact with the thermal compound.

NEW QUESTION 2
A network technician wants to baseline traffic flows on a specific network. Which of the following will provide the GREATEST level of detail?

• A. Network flow information
• B. SNMP traps
• C. Debug level syslog
• D. Protocol analyzer

Answer: D

NEW QUESTION 3
A technician is dispatched to investigate sporadic network outages. After looking at the event logs of the network equipment, the technician finds that all of the equipment is restarting at the same time every day. Which of the following can the technician deploy to correct this issue?

• A. Grounding bar
• B. Rack monitoring
• C. UPS
• D. Air flow management
• E. Surge protector

Answer: C

NEW QUESTION 4
A contractor was hired to troubleshoot congestion issues on the network. After a few of the switches have been reconfigured/upgraded by the contractor, congestion worsens and collisions increase. Which of the following is the BEST action to alleviate the situation?

• A. Allow the contractor to reset switches to factory defaults
• B. Check the cabling on all switches for improper crossover use
• C. Document the changes thatwere made
• D. Downgrade firmware and restore backup configuration

Answer: D

NEW QUESTION 5
A network administrator need to install a border device on the network that will help ensure FTP commands are not being sent in traffic communicating on port 25. Which of the following devices will allow for deep packet inspection?

• A. Layer 7 firewall
• B. Web proxy
• C. Layer 3 switch
• D. Protocol analyzer

Answer: B

Explanation: http://www.infosectoday.com/Articles/Deep_Packet_Inspection_Technologies.htm

NEW QUESTION 6
A PC technician has installed a new network printer that was preconfigured with the correct static IP address, subnet mask, and default gateway. The printer was installed with a new cable and appears to have link activity, but the printer will not respond to any network communication attempts. Which of the following is MOST likely the cause of the problem?

• A. Damaged cable
• B. Duplex mismatch
• C. Incorrect VLAN assignment
• D. Speed mismatch

Answer: C

Explanation: If a port is accidentally assigned to the wrong VLAN in a switch, it’s as if that client was magicallytransported to another place in the network. This would explain the inability to communication with the printer, as it is on a different VLAN.

NEW QUESTION 7
Which of the following refers to a network that spans several buildings that are within walking distance of each other?

• A. CAN
• B. WAN
• C. PAN
• D. MAN

Answer: A

Explanation: CAN stands for Campus Area Network or Corporate Area Network. Universities or colleges often implement CANs to link the buildings in a network. The range of CAN is 1KMto 5KM. If multiple buildings have the same domain and they are connected with a network, then it will be considered as a CAN.

NEW QUESTION 8
A network technician is assisting the company with developing a new business continuity plan. Which of the following would be an appropriate suggestion to add to the plan?

• A. Build redundant links between core devices
• B. Physically secure all network equipment
• C. Maintain up-to-date configuration backups
• D. Perform reoccurring vulnerability scans

Answer: A

Explanation: The business continuity plan focuses on the tasks carried out by an organization to ensure that critical business functions continue to operate during and after a disaster.
By keeping redundant links between core devices critical business services can be kept running if one link is unavailable during a disaster.

NEW QUESTION 9
A new OC3 experiencing intermittent connectivity and loss of signal alarms. A network administrator finds all the cables are properly connected. There is excess cable between the patch panel and the network node. The cables were forced into their storage compartments about the rack. Which of the following is MOST likely cause of the connectivity issue and alarms?

• A. The OC2 was improperly provisioned.
• B. The cable was improperly crimped.
• C. The bend radius of the cable has been exceeded.
• D. The new OC3 cable is experiencing EMI.

Answer: C

NEW QUESTION 10
When querying a DNS server for an AAAA record, which of the following is an appropriate response?

• A. 192.168.2.1
• B. 00:f3:82:99:a2:b8
• C. 61.23.168.192.in-addr.arpa
• D. 3ffe:1900:4545:3:200:f8ff:fe21:67cf

Answer: D

NEW QUESTION 11
CORRECT TEXT
You have been tasked with testing a CAT5e cable. A summary of the test results can be found on the screen.
Step 1: Select the tool that was used to create the cable test results.
Step 2: Interpret the test results and select the option that explains the results. After you are done with your analysis, click the 'Submit Cable Test Analysis' button.

Answer:

Explanation:
A Cable Certifier provides “Pass” or “Fail” information in accordance with industry standards but can also show detailed information when a “Fail” occurs. This includesshorts, the wire pairs involved and the distance to the short. When a short is identified, at the full length of the cable it means the cable has not been crimped correctly.

NEW QUESTION 12
A home user is pairing a bluetooth gaming controller with the game console. Which of the following is implemented between the console and the controller?

• A. LAN
• B. PAN
• C. WAN
• D. MAN

Answer: B

NEW QUESTION 13
Which of the following protocols must be implemented in order for two switches to share VLAN information?

• A. VTP
• B. MPLS
• C. STP
• D. PPTP

Answer: A

Explanation: The VLAN Trunking Protocol (VTP) allows a VLAN created on one switch to be propagated to other switches in a group of switches (that is, a VTP domain).

NEW QUESTION 14
An Amplitude Modulation (AM) radio station may have a detrimental effect on which of the following services?

• A. DOCSIS
• B. Frame relay
• C. SONET
• D. Metro-Ethernet

Answer: A

NEW QUESTION 15
DRAG DROP
Your company recently purchased a new building down the street from the existing office.
For each of the tasks below, select the appropriate antenna type and encryption object for all wireless access point (AP).
1. Create an encrypted wireless connection between the two buildings that BEST controls signal propagation, while maximizing security.
2. Restrict the wireless signal generated by the access points (AP's) inside Building 1, so that it minimizes broadcast beyond the building.
3. Maximize wireless coverage inside Building 1.
4. Building 1's internal wireless network is for visitors only and must not require any special configuration on the visitor's device to connect.

Answer:

Explanation:

NEW QUESTION 16
A technician, Joe, has been tasked with assigning two IP addresses to WAN interfaces on connected routers. In order to conserve address space, which of the following subnet masks should Joe use for this subnet?

• A. /24
• B. /32
• C. /28
• D. /29
• E. /30

Answer: E

Explanation: An IPv4 addressconsists of 32 bits. The first x number of bits in the address is the network address and the remaining bits are used for the host addresses. The subnet mask defines how many bits form the network address and from that, we can calculate how many bits are used for the host addresses.
In this question, the /30 subnet mask dictates that the first 30 bits of the IP address are used for network addressing and the remaining 2 bits are used for host addressing. The formula to calculate the number of hosts in a subnet is 2n - 2. The "n" in the host's formula represents the number of bits used for host addressing. If we apply the formula (22 – 2), a/30 subnet mask will provide 2 IP addresses.

NEW QUESTION 17
Which of the following is a proprietary routing protocol?

• A. RIP
• B. EIGRP
• C. OSPF
• D. BGP

Answer: B