NS0-161 | What Printable NS0-161 Prep Is

Want to know Actualtests NS0-161 Exam practice test features? Want to lear more about Network-Appliance NetApp Certified Data Administrator - ONTAP certification experience? Study Breathing Network-Appliance NS0-161 answers to Regenerate NS0-161 questions at Actualtests. Gat a success with an absolute guarantee to pass Network-Appliance NS0-161 (NetApp Certified Data Administrator - ONTAP) test on your first attempt.

Check NS0-161 free dumps before getting the full version:

NEW QUESTION 1
You are asked to create a new SVM to serve SMB data using Active Directory authentication.
Which two requirements must be satisfied prior to serving data? (Choose two.)

  • A. DNS must be enabled and configured correctly.
  • B. The CIFS license must be installed on the storage system.
  • C. An intercluster LIF must be created for serving SMB data.
  • D. An administrative user must be created for the SMB SVM.

Answer: AC

NEW QUESTION 2
Click the Exhibit button.
NS0-161 dumps exhibit
A customer has zoned switches to a host, but the host cannot see the LUNs.
Referring to the exhibit, what needs to be done to make the LUNs visible to the host? (Choose the best answer.)

  • A. Zoning should be changed to use the 20:06:d0:39:ea:05:03:a3 and 20:08:d0:39:ea:05:03:a3 WWPNs.
  • B. Ports on time-a700 nodes 1 and 2 should have the fc_nvme protocol removed.
  • C. Zoning should be changed to use the 50:0a:09:81:80:d2:c3:b8 and 50:0a:09:81:42:c2:b9 WWPNs.
  • D. The customer should remove the switches and directly connect the host to the controller ports.

Answer: D

NEW QUESTION 3
Click the Exhibit button.
NS0-161 dumps exhibit
You have a 2-node cluster cabled as shown in the exhibit. You want to convert the cluster to a switched cluster. Which two statements are true in this scenario? (Choose two.)

  • A. The conversion is disruptive.
  • B. The conversion is non-disruptive.
  • C. After the conversion, traffic to the intercluster LIFs will flow through the cluster switch.
  • D. After the conversion, traffic to the cluster LIFs will flow through the cluster switch.

Answer: BD

NEW QUESTION 4
You want to create a new SVM for serving NFS data using the Storage Virtual Machine (SVM) Setup wizard.
In this scenario, which object is created automatically during the setup process? (Choose the best answer.)

  • A. a data volume named after the SVM with the suffix _nfs_vol1
  • B. a data aggregate named after the SVM with the suffix _nfs_aggr1
  • C. a data LIF named after the SVM with the suffix _nfs_lif
  • D. an export policy named after the SVM with the suffix _nfs_exp1

Answer: C

Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.exp-nfs-vaai%2FGUID-363E3FA6-DE29-4578-9F45-4D23A6E1E53F.html

NEW QUESTION 5
Which three steps are required to serve NFS exports from your ONTAP system? (Choose three.)

  • A. You must create an export policy rule.
  • B. You must license CIFS.
  • C. You must create an SMB share.
  • D. You must license NFS.
  • E. You must have provisioned a volume to export.

Answer: ABD

Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.exp-nfsv3-cg%2FGUID-A9424109-8286-4053-BBA9-3E542A73080A.html

NEW QUESTION 6
Click the Exhibit button.
NS0-161 dumps exhibit
A customer has an issue with performance on an NVMe solution. The SVM is using all four ports shown in the exhibit. In this scenario, how would the customer improve the host performance? (Choose the best answer.)

  • A. Change the SFP+ in the controllers from 32 Gbps to 64 Gbps.
  • B. Move all of the network interfaces to port 2a.
  • C. Move some of the network interfaces from 2a to 2c and 2d.
  • D. Remove support of the FC protocol and only use NVMe.

Answer: A

NEW QUESTION 7
You currently have an 8-node cluster and want to perform a rolling upgrade to a newer version of ONTAP to solve security issues reported in the Active IQ Web site. In this scenario, which two steps should you validate before you perform the upgrade? (Choose two.)

  • A. Run Active IQ Config Advisor.
  • B. Validate Nodes with Hardware Universe.
  • C. Validate Nodes with Active IQ Unified Manager.
  • D. Run Upgrade Advisor Report.

Answer: AD

NEW QUESTION 8
Click the Exhibit button.
NS0-161 dumps exhibit
Referring to the exhibit, which LIF role is required to copy to cloud with this NetApp Data Availability Services (NDAS) solution? (Choose the best answer.)

  • A. node management
  • B. cluster
  • C. data
  • D. intercluster

Answer: D

NEW QUESTION 9
You are asked to separate replication and data traffic into their own individual VLANs. You created two new VLANs and need to create logical interfaces (LIFs). In this scenario, what must you do before creating the LIFs? (Choose the best answer.)

  • A. Create a firewall policy.
  • B. Create an interface group.
  • C. Create a network subnet.
  • D. Create a broadcast domain.

Answer: B

NEW QUESTION 10
Click the Exhibit button.
NS0-161 dumps exhibit
You have an ONTAP cluster that is running a FlexGroup that is serving SMB data out to various users. One of the users receives an error when trying to modify an existing file. What is the cause of the problem? (Choose the best answer.)

  • A. The FlexGroup is full
  • B. The constituent is full
  • C. The FlexGroup is offline
  • D. The aggregate is full

Answer: B

NEW QUESTION 11
Which two protocols does ALUA support on an ONTAP cluster? (Choose two.)

  • A. iSCSI
  • B. NVMe
  • C. FCP
  • D. NFS

Answer: AD

Explanation:
Reference: https://library.netapp.com/ecmdocs/ECMP1204463/html/GUID-D7570D36-76FF-4923-8ECC-525AF435C2D6.html

NEW QUESTION 12
You are asked to delete an SVM that was used for CIFS.
Which two steps must be completed prior to completing this task? (Choose two.)

  • A. Delete all LIFs from all SVMs.
  • B. Stop the SVM.
  • C. Delete all data volumes in the SVM.
  • D. Delete the CIFS license.

Answer: BC

Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.onc-sm-help-900%2FGUID-1286A6CD-2981-444F-97F6-65D65A00D758.html

NEW QUESTION 13
Click the Exhibit button.
NS0-161 dumps exhibit
You are configuring a NetApp cluster to communicate on VLAN 1. However, the new LIF is unable to communicate with any host in the VLAN. The network administrator has configured the switch port as an access (untagged) port on VLAN 1 and says that the VLAN is non-routed.
Referring to the exhibit, what would you do to troubleshoot this problem? (Choose the best answer.)

  • A. Verify that there is not IP address conflict on the network.
  • B. Reconfigure the LIF to be on port e0c.
  • C. Add a default gateway.
  • D. Verify that the network cabling is working properly.

Answer: B

NEW QUESTION 14
You have a FlexClone parent volume with several child volumes.
In this scenario, which statement is true when you move the FlexClone parent volume to another aggregate? (Choose the best answer.)

  • A. All FlexClone child volumes are also moved.
  • B. All FlexClone child volumes are split and are no longer FlexClone volumes.
  • C. The volumes move operation fails.
  • D. A temporary FlexClone parent remains on the original aggregate.

Answer: D

NEW QUESTION 15
You are asked to deploy a two-node ONTAP Select system. The physical hardware is located in two different locations. You must ensure high availability and automated switchover. Which two steps would you take to satisfy this requirement? (Choose two.)

  • A. Ensure that the ONTAP Select Deploy VM resides at a third location other than the two datacenters.
  • B. Use ONTAP Select Deploy to install the nodes on the physical hardware.
  • C. Ensure that the SyncMirror license is installed on the cluster.
  • D. Use Active IQ Unified Manager to provide a quorum for the two nodes.

Answer: BD

NEW QUESTION 16
What is the default RAID policy for aggregates created with 10 TB disk drives? (Choose the best answer.)

  • A. RAID4
  • B. RAID-DP
  • C. RAID0
  • D. RAID-TEC

Answer: D

Explanation:
Reference: https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-psmg/GUID-2808F15F-6057-4E43-9407-5B3CA274E6C5.html

NEW QUESTION 17
You are the administrator of your company’s ONTAP 9.7 storage system. Your system hosted CIFS shares in your Active Directory environment for several years without any problems. Suddenly users report to you that they can no longer access their CIFS shares.
What is the reason for this problem? (Choose the best answer.)

  • A. The CIFS standard license expired.
  • B. The user account used to join your SMB server to your Active Directory expired.
  • C. The WINS servers are unreachable.
  • D. The NTP servers are unreachable.

Answer: D

NEW QUESTION 18
Click the Exhibit button.
NS0-161 dumps exhibit
Your ONTAP 9.7 cluster failed a security audit on the management control plane. Your network security team asked you to allow only cluster1 and SVM1 management on the 192.168.1.0/24 subnet. In this scenario, where do you apply the default-management service policy shown in the exhibit? (Choose the best answer.)

  • A. LIF
  • B. DNS
  • C. port
  • D. firewall

Answer: A

NEW QUESTION 19
You want to improve the write performance of NL-SAS volumes serving data on your ONTAP. You also want to keep the performance consistent during a possible controller failover. In this scenario, which feature do you use? (Choose the best answer.)

  • A. Flash Cache
  • B. Flash Pool
  • C. FlexCache
  • D. FabricPool

Answer: A

NEW QUESTION 20
Click the Exhibit button.
NS0-161 dumps exhibit
You configured LACP between a 2-node AFF 220 system and two Ethernet switches using multichassis Ether-channel for redundancy. You sent the network connection diagram in the exhibit to your network team to cable and configure the switch. You noticed partial connectivity on the AFF A220 for the interface groups.
Referring to the exhibit, which two statements are correct? (Choose two.)

  • A. ONTAP does not have a multichassis Ether-channel feature.
  • B. The network team forgot to verify the port channel members.
  • C. 10 GbE ports are not supported with the AFF A220.
  • D. The storage cabling to the switches is incorrect.

Answer: AC

NEW QUESTION 21
What are three firewall policies? (Choose three.)

  • A. cluster
  • B. node
  • C. data
  • D. mgmt
  • E. intercluster

Answer: ACE

Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID-09329781-2E57-49E5-B052-EC4D6FEBB41B.html

NEW QUESTION 22
How many global namespaces are there in a 4-node ONTAP cluster that has a single SVM? (Choose the best answer.)

  • A. 1
  • B. 4
  • C. 8
  • D. 2

Answer: A

Explanation:
Reference: https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-concepts/GUID-78701FC2-2910-41FA-AEF4-9E6245030189.html

NEW QUESTION 23
What are three types of licenses available for ONTAP? (Choose three.)

  • A. standard
  • B. evaluation
  • C. system
  • D. site
  • E. field

Answer: ABD

Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.onc-sm-help-930%2FGUID-28C78952-A5CC-40BE-9F30-7057B4045CB6.html

NEW QUESTION 24
Click the Exhibit button.
NS0-161 dumps exhibit
You have a mission-critical SQL application that uses a single SMB 3.1.1 share to host its database. The storage node that is hosting the SMB share sql01_ca for the SQL database experiences a hardware failure and fails over to the surviving node.
Referring to the exhibit, what is the state of the SMB share for the SQL database during the failover? (Choose the best answer.)

  • A. The SMB share will be available, but all data is corrupted.
  • B. The SMB share will be unavailable until node failback.
  • C. The SMB share will be available, and all data is accessible.
  • D. The SMB share is unavailable due to its stateful nature.

Answer: A

NEW QUESTION 25
......

P.S. Thedumpscentre.com now are offering 100% pass ensure NS0-161 dumps! All NS0-161 exam questions have been updated with correct answers: https://www.thedumpscentre.com/NS0-161-dumps/ (60 New Questions)