1Y0-240 | Breathing 1Y0-240 Exam Dumps 2021

NEW QUESTION 1
Scenario: A Citrix Administrator would like to grant access to a Junior Administrator on the NetScaler. The administrator would like to grant full access to everything except the following:
Which pre-existing command policy would meet the needs of the scenario?

• A. Superuser
• B. Network
• C. Operator
• D. Sysadmin

Answer: A

NEW QUESTION 2
Scenario: A Citrix Administrator manages an environment that has multiple websites running through a NetScaler MPX 5550. The NetScaler meets the needs of the environment throughout the year, except in December, when the capacity doubles. The administrator needs to handle this increased web traffic with a temporary, cost-effective solution.
Which action should the administrator recommend in order to handle the increased web traffic?

• A. Purchase a license to upgrade the MPX 5550 to a MPX 5650.
• B. Purchase a BurstPack License.
• C. Purchase Universal License.
• D. Purchase NetScaler Gateway Platform License.

Answer: B

NEW QUESTION 3
A Citrix Administrator needs to match the host name ‘www.example.com’ in all HTTP requests.
Which expression, when used, meets this requirement?

• A. HTTP.REQ.HOSTNAME.EQ(“www.example.com”)
• B. HTTP.REQ.HOSTNAME.(“example.com”)
• C. HTTP.RES.HOSTNAME.CONTAINS(“www.example.com”)
• D. HTTP.RES.HOSTNAME.EQ(“www.example.com”)

Answer: A

NEW QUESTION 4
Scenario: A Citrix Administrator has configured an Authentication, Authorization, and Auditing (AAA) action policy to allow users access through the NetScaler. The administrator bound the policy to a specific virtual server.
Which policy expression will allow all users access through the virtual server?

• A. ns_disallow
• B. ns_false
• C. ns_allow
• D. ns_true

Answer: C

NEW QUESTION 5
Which type of NetScaler monitor can a Citrix Administrator use to check the authentication service of the Active Directory Domain Controller?

• A. The TCP monitor with the LDAP Base DN parameters configured in the Special Parameters.
• B. A custom LDAP monitor with the LDAP Script Name, Base DN, Bind DN, Filter, Attribute and Password parameters configured in the Special Parameters.
• C. The Ping monitor with the Active Directory Domain Controller in the Special Parameters.
• D. The RADIUS monitor with the Base DN, Bind DN, Filter, Attribute and Password parameters configured in the Special Parameters.

Answer: B

NEW QUESTION 6
Scenario: A Citrix Administrator created an SSL virtual server using only the following commands:
add lb vserver sslvserver SSL 10.102.29.133 444 add service sslsvc1 192.168.0.14 SSL 443
add service sslsvc2 192.168.0.15 SSL 443 bind lb vserver sslvserver sslsvc1
bind lb vserver sslvserver sslsvc2
set ssl vserver sslvserver –ssl3 disabled
The SSL virtual server is currently in a DOWN state.
What could be the reason the SSL virtual server is in a down state?

• A. SSLv3 is disabled.
• B. The SSL Certificate is NOT bound to the virtual server.
• C. The SSL services are NOT on the 10.102.29.X network
• D. The virtual server SSL port is NOT set to port 443.

Answer: C

NEW QUESTION 7
Scenario: A Citrix Administrator has configured the following Access Control List (ACL) to block traffic from the IP address 10.102.29.5.
add simpleacl rule1 DENY –srcIP 10.102.29.5
A week later, the administrator found that the ACL is no longer present on the NetScaler. What could be the reason for this?

• A. The administrator did NOT run the apply ACL command.
• B. The NetScaler has been restarted without saving the configurations.
• C. The Simple ACLs remain active for only 600 seconds.
• D. The Simple ACLs remain active for only 60 seconds.

Answer: A

NEW QUESTION 8
Scenario: A Citrix Administrator is troubleshooting a NetScaler issue. The administrator
goes to the command line and from the Shell, tails the ns.log to view the log in real time to find the issue. After a few minutes, the administrator noticed that the logs stopped scrolling and the issue was missed.
How can troubleshooting continue using the ns.log?

• A. The ns.log needs to be downloaded to the client machine for full viewing.
• B. The ns.log service has stopped and needs to be restarted.
• C. The ns.log is still runnin
• D. Press ‘Enter’ and the ns.log will resume.
• E. The ns.log has reached its 100 KB limi
• F. Press ‘CTRL+C’ to stop it from running and issue the command “tail-f ns.log” to resume.

Answer: A

NEW QUESTION 9
A user needs to resolve the domain training.citrix.com, and the information is NOT available in resolver cache and Local Domain Name Server (DNS).
Where will the request be forwarded next?

• A. Root server
• B. Authoritative Name server
• C. Top-level Domain server
• D. Second-level Domain server

Answer: A

NEW QUESTION 10
What is a recommended practice for managing a NetScaler high availability (HA) pair to ensure that management changes are always made on the Primary NetScaler?

• A. Connect to both NetScalers to see which one is the Primary.
• B. Enable Management Access to a SNIP.
• C. Enable Management Access on the Cluster IP (CLIP) address.
• D. Connect to the shared HA NSIP.

Answer: D

NEW QUESTION 11
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following consideration apply in the environment:
The administrator can use persistence based on the ___ setting to resolve this issue. (Choose the correct option to complete the sentence.)

• A. Subnet IP
• B. HTTP Cookies
• C. Proximity
• D. SSL Session IDs

Answer: A

NEW QUESTION 12
Which three statements are true when comparing a Simple Access Control List (ACL) to an Extended ACL? (Choose three.)

• A. Simple ACLs can be modified.
• B. Extended ACLs have priorities.
• C. Simple ACLs apply first.
• D. Extended ACLs apply first.
• E. Simple ACLs are based on the Source IP address only.
• F. Simple ACLs can bridge traffic.
• G. Simple ACLs can be based on the Source and Destination IP address.

Answer: BCE

NEW QUESTION 13
Which NetScaler mode is commonly referred to as ‘inline mode’?

• A. One-Arm Mode
• B. MAC-based Forwarding
• C. Two-Arm Mode
• D. Use Source IP (USIP)

Answer: C

NEW QUESTION 14
Which mode does a Citrix Administrator need to configure in order to allow the NetScaler to forward any packets that are NOT destined for an IP address that is NOT configured on NetScaler?

• A. USIP
• B. Layer 3 Mode
• C. Layer 2 Mode
• D. MBF

Answer: A

NEW QUESTION 15
What is the first thing a Citrix Administrator should create when creating a Server Certificate for NetScaler to secure traffic?

• A. A Certificate key-pair
• B. A Private Key
• C. A Certificate Signing Request
• D. A Certificate Revocation list

Answer: A

NEW QUESTION 16
Which VLAN(S) will be bound to an interface, if VLAN 20 is bound to the interface as tagged in an environment where NetScaler is configured with the default settings?

• A. VLAN 20 untagged only
• B. VLAN 1 tagged, VLAN 20 tagged
• C. VLAN 1 untagged, VLAN 20 tagged
• D. VLAN 20 tagged only

Answer: D

NEW QUESTION 17
A Citrix Administrator needs to configure a rate limiting policy for the DNS requests to a threshold of 1000 DNS requests per second.
Which set of commands does the administrator need to run to correctly configure the rate limiting policy?

• A. add stream selector DNSSelector1 client.udp.dns.domainadd ns limitIdentifier DNSLimitIdentifier1 –threshold 5 –timeSlice 1000 –selectorName DNSSelector1add dns policy DNSLimitPolicy1 “sys.check_limit(”DNSLimitIdentifier1”)” –preferredLocation “North America.US.TX.Dallas..”bind dns global DNSLimitPolicy1 5
• B. add stream selector DNSSelector1 client.udp.dns.domainadd ns limitIdentifier DNSLimitIdentifier1 –threshold 5 –timeSlice 1000 –selectorName DNSSelector1add dns policy DNSLimitPolicy1 “sys.check_limit(”DNSLimitIdentifier1”)” –preferredLocation “North America.US.TX.Dallas..”
• C. add stream selector DNSSelector1 client.udp.dns.domainadd ns limitIdentifier DNSLimitIdentifier1 –threshold 1000 –timeSlice 1000 –selectorName DNSSelector1add dns policy DNSLimitPolicy1 “sys.check_limit(”DNSLimitIdentifier1”)” –preferredLocation “North America.US.TX.Dallas..”
• D. add stream selector DNSSelector1 client.udp.dns.domainadd ns limitIdentifier DNSLimitIdentifier1 –threshold 1000 –timeSlice 1000 –selectorName DNSSelector1add dns policy DNSLimitPolicy1 “sys.check_limit(”DNSLimitIdentifier1”)” –preferredLocation “North America.US.TX.Dallas..”bind dns global DNSLimitPolicy1 5

Answer: C