1Z0-429 | how many questions of 1Z0-429 practice test?
Q31. Which set of steps is the recommended cabling sequence with FS1-2 hardware components?
A. 1. Pilot 1: Install CMA, plug all cables, and route them Power first, Ethernet Last.
2. Pilot 2: Same as above.
3. Controller 1: Install CMA, plug and route cables Power first, Ethernet, SAS Controller
Interconnects, SAS Controller to Strings and Front End Network Connections respectively.
4. Controller 2: Same as above.
5. DEs per string sequence.
B. 1. Controller 1: Install CMA, plug and route cablesPower first, Ethernet, SAS Controller
Interconnects, SAS Controller to Strings, and Front End Network Connections respectively.
2.Controller 2: Same as above.
3.Pilot 1: Install CMA, plug all cables, and route them Power first, Ethernet last.
4.Pilot 2: Same as above.
5. DEs per string sequence.
C. 1. Controller 1: Install CMA, plug and route cables Power first, Ethernet,SASController
Interconnects, SAS Controller to Strings and Front End Network Connections respectively.
2. Controller 2: Same as above.
3. DEs per string sequence.
4. Pilot 1: Install CMA, plug al cablesand route them Power first, Ethernet Last.
5.Pilot 2: Same as above.
D. 1. Pilot 1: Install CMA, plug all cables,and route them Power first, Ethernet last.
2. Pilot 2: Same as above.
3. DEs per string sequence.
4. Controller 1: Install CMA, plug and route cables Power first, Ethernet, SAS Controller
Interconnects, SAS Controller to Strings, and Front End Network Connections respectively.
5. Controller 2: Same as above.
Answer: C
Q32. Which FSCLI command can be used to identify string configuration?
A. topology
B. verify-topology
C. string-list
D. verify string
Answer: B
Reference:
http://docs.oracle.com/cd/E57980_10/E55914_01/E55914_01.pdf
Q33. Which account should be used by the customer support team when working on the FS1-2?
A. Administrator
B. Oracle
C. Primary Administrator
D. Pillar Support
Answer: B
Reference:
http://www.oracle.com/us/products/oracle-fs1-2-ds-2301395.pdf
Q34. After replacing the bad disk drive by using Guided Maintenance, what is the final step to complete the drive replacement?
A. Click Finish in the guided maintenance wizard.
B. No further steps are required.
C. Click Cancel in the guided maintenance wizard.
D. Click Complete in the guided maintenance wizard.
Answer: D
46. Where does the FS1 Data Protection Manager record its events?
A. the system event log
B. the log file on the host
C. the Event Viewer
D. the /var/log/syslog file on the Pilot
Answer: C
Q35. How can you create a new administrator account?
A. To be able to access the Create Administrator Account dialog box, you must first select Administrator Accounts in the navigation bar under Global Settings. Then you have three options: Click the Actions drop-down menu and select Create or right-click on the context panel and select Create, or click CNTL n to open the dialog box.
B. On the Global Settings tab, under Global Settings, select Create from the Actions drop-down menu to open the Create Administrator Account dialog box.
C. On the System tab, under System, select Security from the Actions drop-down menu to open the Create Administrator Account dialog.
D. On the Global Settings tab, under Global Settings select Security from the Actions drop-down menu to open the Create Administrator Account dialog.
E. It is not possible to create a new administrator account. The FS system supports only one default administrator account, named administrator.
Answer: D
Q36. Which four statements are true about MaxRep?
A. The replication license in MaxRep is separate for asynchronousand synchronous.
B. MaxRep supports Application consistent Data Recovery (Windows, Oracle DB). Additional charges apply.
C. MaxRep can replicate data only across FC link.
D. vSnap is mainly used for test, integrity checking, and single file recovery. It is not for use in heavy I/O.
E. MaxRep Rollback is an irreversible process.
Answer: A,C,D,E
Q37. The storage administrator has SAN attached on both hosts A and B clustering tothe FS1 system. These hosts need to be assigned to the same LUNs. Which option simplifies the storage administrator’s task of associating hosts tothe LUNs?
A. Host Group
B. SAN Host
C. FS1 Path Manager
D. Associate Hosts
Answer: C
Q38. To copy a LUN, which step should the storage administrator perform after navigating to SAN > Storage > LUN?
A. Select the LUN to be cloned, click the Actions drop-down menu, and select Clone.
B. Select the LUN to be cloned, click the Actions drop-down menu, and select Copy.
C. Select the LUN to be cloned, click the Actions drop-down menu, and select Create LUN like selected.
D. Select the LUN to be cloned, click the Actions drop-down menu, and select Modify.
Answer: B
Q39. What is the minimum bending radius of fiber optic cable?
A. 2 inches (5.1 cm)
B. 3 inches (7.6 cm)
C. 4 inches (10.2 cm)
D. 5 inches (12.7 cm)
E. 6 inches (15.2 cm)
Answer: E
25. How many SAS HBAs are allowed in the Performance Controller configuration of FS1-2?
A. one
B. two
C. three
D. four
Answer: C
Q40. Identify the FS1 feature that migrates data between storage tiers based on workload.
A. Quality of Service (QoS)
B. System Locality Information Table (SLIT)
C. QoS Plus (Auto-Tiering)
D. Port Masking
Answer: C
Reference:
http://www.oracle.com/us/products/oracle-fs1-2-ds-2301395.pdf