1Z0-879 | Most up-to-date Oracle 1Z0-879 braindumps
Q171. You must add additional network ports to your SPARC-based workstation. You have a Quad Fast Ethernet card. The system is currently powered off for scheduled maintenance.
Which steps make the card accessible by the operating system?
A. remove the system cover; install the qfe card in an available SBus slot; power on the system; log in to the system as root; verify the card is working by running the rup command
B. remove the system cover; install the qfe card in an available PCI slot; power on the system; log in to the system as root; verify the card is working by running the ping command
C. remove the system cover; install the qfe card in an available PCI slot; power on the system; when you see the banner displayed, press the Stop-a key combination; execute the boot -rv PROM command at the ok prompt and look for references to qfe in the boot messages
D. remove the system cover; install the qfe card in an available PCI slot; power on the system; log in to the system as a general user; verify the card is working by running the rup command
Answer: C
Q172. Which two commands list the profiles assigned to user fred? (Choose two)
A. profiles fred
B. profiles -1 fred
C. profiles —list fred
D. grep —w fred /etc/security/prof_attr
E. grep —w fred /etc/securfity/po1icy.conf
Answer: A,B
Q173. Given:
# svcadm milestone -d svc:/milestone/multi-user:default
Which two services do NOT start automatically? (Choose two.)
A. the /etc/rc2_d/S99dtlogin service
B. the /etc/rc2_d/S10lu service
C. the /etc/rc3_d/S84appserv service
D. the /etc/rc2_d/S90wbem service
E. the /etc/rc3_d/S90samba service
Answer: C,E
Q174. Given:
# metadb flags first blk block count a u 16 8192 /dev/dsk/c1t0d0s3 a u 16 8192 /dev/dsk/c1t1d0s6 a u 8208 8192 /dev/dsk/c1t1d0s6 a u 16 8192 /dev/dsk/c1t2d0s6 a u 8208 8192 /dev/dsk/c1t2d0s6 a u 16 8192 /dev/dsk/c1t3d0s6 a u 8208 8192 /dev/dsk/c1t3d0s6 # metastat -c d100 s 77GB c1t1d0s6 c1t2d0s6 c1t3d0s6
Which statement is true about this configuration?
A. The d100 metadevice is a three-way RAID-0 striped volume. B. The d100 metadevice is a seven-way RAID-0 striped volume. C. The d100 metadevice is a three-way RAID-1 mirrored volume. D. The d100 metadevice is a seven-way RAID-1 mirrored volume.
Answer: A
Q175. Which two commands list all the authorizations assigned to the user john? (Choose two)
A. auths john
B. roles john
C. profile john
D. more /etc/user attr
Answer: A,D
Q176. A user's workstation is configured to mount /archive from a remote system through
NFS using the following entry in /etc/vfstab:
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
speedy:/archive - /archive nfs - yes -
To improve performance, a second NFS server, named pokey, is being added to serve out the identical file system.
You notice that the workstation is attempting to mount /archive read-write. The /archive file system contains old archived data and should not be modified. You decide that the user's workstation should mount /archive read-only instead.
Which two changes must you make to allow the workstation to use the NFS server pokey and speedy and to correct the read-write/read-only mounting issue? (Choose two.)
A. change the mount options field to ro
B. change the mount options field to ro=speedy,pokey
C. change the device to mount field to speedy,pokey:/archive
D. change the device to mount field to read pokey:/archive/speedy
Answer: A,C
Q177. On a system using only local files for host name resolution the sysiogd daemon configuration file contains
mai1.debug ifdef('LOGHOST' , /var/adm/auth1og, @1oghost)
is indicated if the mail-related log messages are written to the /var/adm/authlog file?
A. The loghost is unreachable over the network.
B. The loghost entry is not in the /etc/inet/hostsfile.
C. The system has an /etc/inet/hosts alias of loghost.
D. The LOGHOST variable is evaluated as false by the m4 macro processor.
Answer: C
382. Which RBAC command helps you find the attributes commands that would be executed for a particular user?
A. auths B. profiles C. auths -1
D. pfexec —v
E. profiles —1
Answer: E
Q178. In preparation of an outsourcing operation, the current NIS domain needs to be split in two.
Which statement is true about creating a second NIS domain on the same server as the existing domain?
A. You can create a second NIS domain which is served by the same ypserv daemon.
B. This cannot be done because you can only run one NIS domain on the system at a time.
C. You can create a second NIS domain on the same server as the existing domain only if you create a new zone and run the NIS server in that zone.
D. You can create a second NIS domain on the same server as the existing domain as long as the second NIS domain is a subdomain of the master domain.
Answer: A
Q179. You are configuring a system on a public network. Because of the risk of other systems snooping network traffic and obtaining login and password information that is sent in clear text, you want to force users who access this system remotely to use ssh instead of telnet. To do this, you want to disable in.telnetd. Which two commands accomplish this? (Choose two.)
A. inetadm -d svc:/network/telnet
B. inetd delete svc:/network/telnet
C. svcadm disable svc:/network/telnet
D. inetadm delete svc:/network/telnet
E. svcadm destroy svc:/network/telnet
F. grep -v in.telnetd /etc/inetd.conf > /etc/inetd.conf
Answer: A,C
Q180. You need to create a Flash Archive of a master server. You want to set the following characteristics of the archive:
The archive will be stored as /export/flash/flash_archive, but do not include the /export/flash directory in the archive
The archive description will be root_archive.
The archive must be compressed
The archive will be rooted at the root (/) directory admin is the author of the archive
Do not include Sizing information flash_root is the name of the Flash archive
Based on the above information, which command will you use to create the Flash Archive?
A. flar create -n flash_root -C -R / -d root_archive
B. flar create -f flash_root -c -R / -d root_archive
C. flar create -c -R / -x /export/flash
D. flar create -n flash_root -c -R / -e root_archive
Answer: D