1Z0-879 | The Secret of Oracle 1Z0-879 dumps
Q31. You have a Sun V880 server with twelve disk drives installed. You are trying to document the server hardware configuration and need toYou have a Sun V880 server with twelve disk drives installed. You are trying to document the server? hardware configuration and need to identify and document each disk drive that is installed. In addition, you want to note both the physical device name and the logical device name for each installed disk. Which two commands will display the physical device name along with the corresponding logical device name for each disk installed in the server? (Choose two.)
A. ls -l /dev/dsk
B. Use the dmesg command
C. Use the prtconf command.
D. In the format utility, from the main menu, select show
E. In the format utility, from the main menu, select disk
F. In the format utility, from the main menu, select verify
Answer: A,E
Q32. You want to boot a SPARC-based system and stop system initialization at run level 2. Which two procedures can do this? (Choose two.)
A. Use the reboot -- -2 command to shut down and reboot the system.
B. From the OBP ok prompt, boot the system using the boot -2 command.
C. Set the milestone for this reboot to multi-user.
D. Shut down the system with the init s command, then use the init 2 command to switch to run level 2.
E. From the OBP ok prompt, boot the system to run level s, then use the init command to set the run level to 2.
Answer: C,E
Q33. When displaying the current swap space configuration on your system, the following information is presented:
swapfile dev swap1o b1ocks f ree
/dev/dsk/cOdOsl 102,1 8 1060280 1060280
total: 103072k bytes allocated + 22240k reserved = 125312k used, 779060k available Given the above information, which of the following answers apply to your systemti current swap space configuration?
A. Your system is currently using 103072k bytes of swap space on the disk.
B. Your system is currently using 125312k bytes of swap space on the disk.
C. 22240k is currently not allocated, but claimed by memory mappings.
D. 103072k is currently NOT allocated, but claimed by memory mappings
Answer: C
Q34. You have created a shell script to transfer files to a remote system. At the end of the script, you want to send a message to the sysiog messaging facility stating that the file transfer is complete. Which entry would send the Transfer Complete message to the sysiog messaging facility?
A. echo "Transfer Complete" > syslogd
B. logger "Transfer Complete"
C. log "Transfer Complete"
D. sysiog —1 "Transfer Complete"
Answer: B
Q35. You have an x86-based server with two SATA drives. Each drive has an installation of x86 Solaris and both drives are identical. The system currently boots from the first SATA disk drive, but, after modifying the /etc/vfstab file on the boot drive, the first SATA drive will not boot. You want to boot the system from the second SATA disk drive, but it won boot. want to boot the system from the second SATA disk drive, but it won boot. What do you need to do to get the system booted?
A. Select the second SATA drive in the GRUB menu during bootup; boot to the second drive; once booted to the second drive, mount and copy the /etc/vfstab file to the boot disk.
B. Edit the boot string in the GRUB menu to boot from the second SATA drive; once booted to the second drive, mount and fix the /etc/vfstab file on the boot disk.
C. Install a bootblock onto the second SATA drive; select the second drive during bootup; once booted to the second drive, mount and fix the /etc/vfstab file on the boot disk.
D. Boot from DVD to get into a single user shell; mount and fix the /etc/vfstab file on the boot drive.
Answer: D
Q36. You are configuring a remote server. Your help desk technicians need the ability to do printer administration. Because of sensitive data on this system, you cannot grant the help desk technicians full root access. Which two commands create a role of helpdesk and assign the Printer Administration profile to it, and then add a help desk technician with a userid of roger to that role? (Choose two.)
A. useradd roger -A helpdesk B. usermod -R helpdesk roger C. roleadd -A helpdesk -U roger
D. roleadd -m -d /export/home/helpdesk -P "Printer Administration" helpdesk
E. useradd -A helpdesk -m -d /export/home/helpdesk -P "Printer Administration" roger
Answer: B,D
Q37. A user is unable to access the system deep-six.overthere. The revolve.conf file on the user's system contains the following lines:
# cat /etc/resolv.conf domainname yourdept.yourcompany.com domain yourdept.yourcompany.com nameserver 129.147.62.1 nameserver 129.147.62.14 And nslookup generates the following error message: # nslookup deep-six.overthere Server: 129.147.62.1 Address: 129.147.62.1#53
** server can't find deep-six.overthere: NXDOMAIN
What can be done to resolve this problem while keeping the user's system in the yourdept.yourcompany.com domain?
A. add another name server to resolv.conf
B. add search overthere.yourcompany.com to resolv.conf
C. ask the users to use deep-six.overthere.yourcompany.com
D. change resolv.conf to have domainname overthere.yourcompany.com instead of domainname corp.yourcompany.com
Answer: B,C
Q38. Click the Exhibit button.
The steps that should be used to interactively restore the /etc/inet/hosts file from the second ufsdump file on a tape are shown in the exhibit. In which order should they be executed?
A. 3, 6, 4, 2, 1, 5, 7, 8
B. 3, 4, 5, 6, 2, 1, 7, 8
C. 3, 6, 5, 2, 1, 4, 8, 7
D. 3, 5, 6, 4, 2, 1, 8, 7
Answer: D
Q39. There is a problem on a SPARC-based system that has several permanent, customized device aliases. The system's use of these aliases needs to be temporarily disabled, so that when the problem is cleared, they can be enabled without having to redefine them. Which sequence of OBP commands will temporarily disable the customized device aliases defined on the system?
A. use-nvramrc=falsereset
B. use-nvramrc?=falsereset
C. setenv use-nvramrc? Falsereset
D. setenv use-nvramrc?=falsereset
Answer: C
Q40. What are two requirements to JumpStart systems with Solaris OS using PXE boot? (Choose two.)
A. an FTP server with x86 install images
B. an install server with x86 install images
C. a DHCP server with appropriate vendor options configured
D. a BOOTPARAM server with appropriate vendor options configured
Answer: B,C