1Z0-879 | A Review Of Refined 1Z0-879 dumps


Q341. Which method can be used to boot a zone? 

A. The zone administrator runs zlogin <zone> boot. 

B. The zone administrator runs zlogin -C <zone> boot. 

C. The zone administrator logs into the zone and runs boot. 

D. The global zone administrator runs zoneadm -z <zone> boot. 

Answer:

Q342. The disk slice /dev/dsk/c2t2d0s3, which has the /opt/software file system mounted, is starting to report errors that indicate it might crash soon. It is imperative that the file system is unmounted and the disk taken offline quickly. A check indicates that a number of people are accessing this file system. 

Which command forcibly unmounts this file system? 

A. umount -f /opt/software 

B. unmount -f /dev/dsk/c2t2d0s3 

C. umount /dev/dsk/c2t2d0s3 

D. unmount /opt/software 

Answer:

Q343. A user contacts the help desk to report that a script run by the user's department is reporting an error. The script checks for who is logged in. Your first action is to make sure that the file that the who command reads for its output, is present. 

Which file does the who command read to obtain its output? 

A. /var/adm/users 

B. /var/adm/utmpx 

C. /var/adm/utmp 

D. /var/adm/wtmpx 

Answer:

Q344. A Solaris 10 OS is configured to log to the /var/adm/messages file using syslog. Which two statements are correct? (Choose two.) 

A. The logadm utility automatically rotates the /var/adm/messages file. 

B. The tail -f /var/adm/messages command can be used to monitor the /var/adm/messages file in real time. 

C. The syslog facility automatically trims the /var/adm/messages file, deleting messages that are more than twenty-four hours old. 

D. The /var/adm/messages file is a DBF formatted binary file. The Solaris Management Console Log Viewer GUI is the only way to monitor the /var/adm/messages file in realtime. 

E. The /var/adm/messages file only contains the severity of the message. The facility of the message must be interpreted using the process name and ID contained in the message. 

Answer: A,B 

Q345. You have just configured the network interface on systemA.  The following information is displayed pertaining to the network interface on systemA: 

What is most likely the problem? 

A. The interface is not plumbed. 

B. The interface is not configured. 

C. The interface does not have valid routes configured. 

D. The interface is not marked as UP 

Answer:

Q346. If your system uses a large number of mirrors, make sure that you have an adequate number of state databases. If you create too few state database replicas, performance could be negatively impacted. What is the recommended number of state database replicas for mirrored volumes? 

A. At least two state database replicas per RAID-1 volume. 

B. At least three state database replicas per RAID-1 volume. 

C. One state database replicas per RAID-1 volume. 

D. At least five state database replicas per RAID-1 volume. 

Answer:

Q347. Which two statements are true about the relationship between NIS master servers and NIS slave servers? (Choose two.) 

A. Only one master server can be configured, but it can support multiple slave servers and clients. 

B. Load balancing capabilities within NIS can be achieved by configuring at least one slave server on each subnet. 

C. Clients cannot bind across subnets, therefore you must provide a slave server on each subnet bound to a master server. 

D. There can be an unlimited number of slave servers and clients on a subnet, but there must be a master server on each subnet. 

Answer: A,B 

Q348. This file contains an entry that is used to configure a corresponding interface. The following is an example entry in the file: systemA 

Without this file, the Solaris startup script will not configure the e1000g0 network interface and as a result, the kernel will not talk to the interface. Which file is it? 

A. /etc/nodename 

B. /etc/inet/hosts 

C. /etc/inet/ipnodes 

D. /etc/hostname.e1000g0 

Answer:

Q349. You want to allow the NFS server saturn to share the /var/tmp directory read-only with clients pluto and mars. You also want to allow pluto to have root access to this directory. 

Which line should you add to the /etc/dfs/dfstab file for saturn? 

A. share -F nfs -o ro,root=pluto /var/tmp 

B. share -F nfs root_access pluto /var/tmp 

C. share -F nfs -o,ro=mars:pluto,root=pluto /var/tmp 

D. share -F nfs -o,root=pluto,ro=mars,pluto /var/tmp 

E. share -F nfs ro,root=pluto /var/tmp client=mars:pluto 

Answer:

Q350. Which two commands list all the authorizations assigned to user john? (Choose two.) 

A. auths john 

B. su john -c auths 

C. grep -w john /etc/user_attr 

D. grep john /etc/security/auth_attr 

E. grep -w john /etc/security/auth_attr 

Answer: A,B