400-101 | Most up-to-date Cisco 400-101 exam question


P.S. High value 400-101 preparation labs are available on Google Drive, GET MORE: https://drive.google.com/open?id=1IW-FBjIGklMU6wt1CVbJF66pb-8K-oca


New Cisco 400-101 Exam Dumps Collection (Question 10 - Question 19)

Q10. Refer to the exhibit.

If the route to 10.1.1.1 is removed from the R2 routing table, which server becomes the master NTP server?

A. R2

B. the NTP server at 10.3.3.3

C. the NTP server at 10.4.4.4

D. the NTP server with the lowest stratum number

Answer: D

Explanation:

NTP uses a concept called u201cstratumu201d that defines how many NTP hops away a device is from an authoritative time source. For example, a device with stratum 1 is a very accurate device and might have an atomic clock attached to it. Another NTP server that is using this stratum 1 server to sync its own time would be a stratum 2 device because itu2021s one NTP hop further away from the source. When you configure multiple NTP servers, the client will prefer the NTP server with the lowest stratum value.

Reference: https://networklessons.com/network-services/cisco-network-time-protocol-ntp/

Q11. Ping and Traceroute extended options are very useful. What is the difference between using the Record option with the ping command vs. the traceroute command?

A. The record option is not supported with the ping command

B. The record option is not supported with the traceroute command

C. When leveraged with the ping command, the Record option of this command not only informs you of the hops that the echo request (ping) went through to get the destination, but is also informs you of the hops it visited on the return path

D. When leveraged with the traceroute command, the Record option of this command not only informs you of the hops that the echo request (ping) went through to get the destination, but is also informs you of the hops it visited on the return path

Answer: C

Q12. Which technology uses MPLS to provide 1Pv6 connectivity o customers in the core network

without the need for dual stack?

A. 6to4

B. NAT64

C. NAT

D. SPE

Answer: D

Q13. Refer to the exhibit.

Which tag will be applied to 172.16.50.0/24 route?

A. 10

B. 20

C. 11

D. 40

Answer: A

Q14. What are two major requirements for configuring an extended VLAN with VTPv2 (Choose two)

A. VLAN pruning must be enabled

B. The device must be operating in VTP transparent mode

C. The configuration must be made in global configuration mode

D. The VLAN must be configured in VLAN database mode

E. The reduced MAC address feature must be disabled

Answer: B,C

Q15. Which two statements about QoS and marking are true? (Choose two)

A. The set-discard-class command can be configured for ATM and MPLS protocols

B. It can use a table map to mark traffic

C. It requires Cisco Express forwarding to be enabled on the sending interface and the receiving interface

D. It is supported on tunnel interfaces

E. It is supported on Fast EthernetChannel and ATM SVC interfaces

Answer: A,D

Q16. Which statement is true when using a VLAN ID from the extended VLAN range (1006- 4094)?

A. STP is disabled by default on extended-range VLANs.

B. VLANs in the extended VLAN range can only be used as private

C. VLANs in the extended VLAN range cannot be pruned

D. VLANs in the extended VLAN range can be used within either client or server mode

Answer: C

Q17. An NSSA area has two ABRs connected to Area 0. Which statement is true?

A. Both ABRs translate Type-7 LSAs to Type-5 LSAs

B. No LSA translation is needed

C. Both ABRs forward Type-5 LSAs from the NSSA area to backbone are.

D. The ABR with the highest router ID translates Type-7 LSAs to Type-5 LSAs

Answer: D

Q18. Which two statements about the host address 172 150 100 10/18 are true?(Choose two)

A. The network address is 172.150 0 0

B. The network address is 172.150.64.0

C. The network address is 172 150 100 0

D. The broadcast address is 172.150.127.255

E. The broadcast address is 172 150 255 255 F The broadcast address is 172.150.100 255

Answer: B,D

Q19. Refer to the exhibit. An Ipv6 tunnel is configured between site A and site B. Which feature does the tunnel support?

A. single policy

B. transport mode

C. site-to-site tunnel mode

D. OSPFv2

Answer: C

100% Renewal Cisco 400-101 Questions & Answers shared by Certifytools, Get HERE: https://www.certifytools.com/400-101-exam.html (New 911 Q&As)