7004 | The Secret of Avaya 7004 pdf

Q2. Click the Exhibit button.

Given the customeru2021s programmed database shown in the exhibit and AC 1 = 9, over which RLI will a call placed to 9-1-912-534-2222 complete?

A. RLI 9

B. RLI 4

C. RLI 3

D. RLI 2

E. call will not complete as dialed

Answer: B

Q3. Click the Exhibit button.

Consider the customeru2021s current programming:

NCOS of 2 = FRL of 2

Class of Service on all sets is CTD

With reference to the exhibit, how would you modify Route List Index 1 to permit all station users with an NCOS of 2 to place 1+912 calls?

A. Change FRL on Route List Index 1 to FRL 1

B. Change FRL on Route List Index 1 to FRL 4

C. Change FLI on NPA entry for 1214 to RLI 2

D. Leave all existing programming as is.

Answer: A

Q4. Your customer has a Communication Server 1000 RIs. 7 x system equipped with System Errors and Events Lookup pack 245 that provides the ability to display system messages on screen.

When a system message in received, which procedure should you use to look it up and display it on the screen?

A. Enter the system error number followed by <cr> For example, bug4080<cr>

B. Enter bug followed by the system error code and <cr>. For example, bugerr4080<cr>

C. Enter errcde followed by the system error code and <cr>. For example, errcde bug4080<cr>

D. Enter err followed by the system error code followed by <cr>. For example, err bug4080<cr>

Answer: B

Explanation: Please see the extract below as pulled off of a Rel7.5 CS1000MG: OVL000

>err bug4080

> BUG4080

An out-of-range index has been detected for the "Type of Number" field contained in some ISDN information elements. The field cannot be

correctly encoded or decoded. Severity: Minor

OVL000

Q5. Click the Exhibit button.

You are responsible for maintaining a small Communication Server 1000 RIs. 7 x SA system. The customer decided against using Basic Automatic Route Selection (BARS) for call routing. They are now reporting that the user of extension 2001 is blocked when attempting to dial local call using the COT access code.

Based on the exhibit, what adjustments should be made to the system to allow the user of extension 2001 to dial local calls only by directly accessing the COT Route?

A. Change the Class of Service of extension 2001 to Semi Restricted (SRE) and leave the TGAR setting of two (2) on the COT Route.

B. Change the TGAR of extension 2001 to zero and leave the Class of Service setting of Toll Denied (TLD) on extension 2001.

C. Change the Class of Service of extension 2001 to Conditionally Unrestricted (CUN), leave the TGAR setting of two (2) on the COT Route.

D. Change the TGAR of the COT Route to zero and change the Class of Service setting of extension 2001 to Conditionally Toll Denied (CTD)

Answer: D

Q6. In order to set up the Customer Data Block within Element Manager to support Zone Based Dialing, and assuming Package 420 ZBD Package is installed and active, what needs to be done first?

A. Configure Numbering Zones.

B. Select the Private Dial Plan from the customeru2021s Features page.

C. Select the Public Dial Plan from the customeru2021s Features page.

D. Select the u201cEnable Numbering Zonesu201d option from the customeru2021s Feature page.

Answer: D

Q7. Click the Exhibit button.

A customer has asked if the Communication Server 1000 RIs. 7 x system can provide Exchange users with the ability to selectively drop people that have been added to a conference.

Based on the print-outs, what capabilities are currently available to the user of extension 2006?

A. The user cannot see the conferee display count or selectively disconnect callers.

B. The user can see the conferee display count and can selectively disconnect callers.

C. The user can see the conferee display count but cannot selectively disconnect callers.

D. The user cannot see the conferee display count but selectively disconnect callers.

Answer: B

Q8. A company plans to use Virtual Trunk Interzone traffic. You are programming a bandwidth management zone on a Server 1000 RIs. 7 x Call Server. Which is the recommended bandwidth management strategy, assuming that bandwidth conservation is required?

A. Best Quality (BQ)

B. Bandwidth Conserve (BC)

C. Best Bandwidth (BB)

D. Best Effort (BE)

Answer: A

Q9. Click the Exhibit button.

Consider a companyu2021s dialing plan shown in the exhibit and an example for its requirements:

A station user at the company, with Location Code 221, placed an ESN call, dialing 7-221- 2581. This would be an On-Net call and the NARS programming must remove the LOC code and dial the DN internally.

What programming would remove the location code for a call dialed within the originating Communication Server 1000 to a DN on that same Communication Server 1000?

A. Each site would have its own Location Code programmed as a Home Location Code (HLOC) under Translation Table #1 in their CS 1000.

B. The location codes for each site would be programmed under the LOC programming in Translation Table #2 at all locations.

C. Home NPA Codes (HNPA) for each site would be programmed under Translation Table

#1 at each location in their CS 1000.

D. Each site would have the Location Codes for all sites programmed as Home Location Codes (HLOC) in Translation Table #1 of their CS 1000.

Answer: A

Q10. A customer has deployed a Communication Server (CS) 1000 RIs. 7 x system at their site. They have asked you if the CS 1000 has a feature that can extend and ring calls to other locations. You have decided that Personal Call Assistant (PCA) will meet the customeru2021s requirements and verified that the system is equipped with Package 398, and that it has sufficient ISM parameters. Which step must be performed first when implementing PCA?

A. Locate or configure a Superloop for PCA

B. Enable the PCA feature for the customer

C. Configure Flexible feature codes for PCA control

D. Configure the telephone parameters to support PCA

Answer: B

Q11. Due to Directory Number conflicts in the Communication Server 1000 network, the customer wants to route calls by Home Location Codes (HLOC) and Location Codes (LOCs).

Consider the following Home Location Codes.

HLOC for system A = 329 HLOC for system B = 429

What LOC should be provisioned for system A?

A. LOC for System A = 3

B. LOC for System A = 49

C. LOC for System A = 329

D. LOC for System A = 429

Answer: D