76940X | What Guaranteed 76940X Free Demo Is

NEW QUESTION 1
A customer requires additional Avaya Aura® applications to be added to the ACP 4200. This has been reviewed and approved by Avaya's ACP Product Management team. It has been determined that a new computer server is required to meet the expanded resource requirement.
Which three parts of the Lifecycle Workbook need to be updated to provide for the new requirements? (Choose three.)

• A. Contact Info
• B. ACP 4200 Solution RMU Elevation
• C. Serial Numbers
• D. Network Data
• E. QA Checklist

Answer: ABC

NEW QUESTION 2
A customer reports that several VMs have become Unreachable or Invalid in vCenter. What would you check or try first to solve this problem?

• A. From the Host, stop and start the monitoring agent.
• B. On the Host, from vCenter, try to re-scan the Datastores.
• C. Place the host in maintenance mode.
• D. Shut the host down and restart it.

Answer: D

NEW QUESTION 3
A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. The system has two pairs of ServerTech PDUs.
Which statement about the PDU firmware file describes the upgrade process that the engineer needs to follow?

• A. It will need to be uploaded to all 4 PDUs.
• B. It will need to be uploaded to each PDU Management Web Interface.
• C. It will need to be uploaded to one PD
• D. This PDU will then distribute the file to the remaining 3 PDUs.
• E. It will need to be uploaded to Orchestrato
• F. Orchestrator will then distribute the file to the 4 PDUs.

Answer: C

NEW QUESTION 4
A support engineer logs into Avaya Orchestrator and clicks on the Service Availability icon for the Power Supply of a G450 device.
What information is the engineer looking for?

• A. The current state of the power supply (OK, Warning, Unknown or Critical).
• B. The amount power (in Watts) that the power supply is using.
• C. A percentage breakdown of the state of the power supply (OK, Warning, Unknown or Critical) over a period of time.
• D. A list of other services that are available for the G450 device.

Answer: A

NEW QUESTION 5
A maintenance window has been scheduled to allow for the upgrade of the firmware of one of the VSP switches in the ACP.
What can be done to avoid receiving unnecessary notifications during this period?

• A. Disable Syslog messages on the VSP switch before performing the upgrade.
• B. Disable SNMP trap notification on the VSP switch before performing the upgrade.
• C. Use the Acknowledgments feature in the Orchestrator to acknowledge any notifications immediately.
• D. Use the Schedule Downtime feature in Orchestrator to schedule period of expected service interruption.

Answer: A

NEW QUESTION 6
Which equipment is standard in a new ACP 4200 4.0?

• A. IP 7254
• B. VSP 4850
• C. IP 8284
• D. VSP 7024

Answer: B

NEW QUESTION 7
A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. When upgrading the HPE server firmware, the support engineer uses the iLO web interface’s remote console to run the update tool. After several minutes, the engineer notices that the remote console does not show any display, and in the lower left- hand corner it displays “No Video”.
Which statement describes the action that the engineer would take?

• A. Using the iLO web interface, disable the server’s screen saver function.
• B. Using the iLO web interface, power on the server using the Power On: Momentary Press button.
• C. Using the iLO web interface, reboot the server using the Power Cycle: Server Reboot option.
• D. Use the remote control when it reappears after the server automatically reboots.

Answer: B

NEW QUESTION 8
A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. The engineer is upgrading the ESXi hosts to VMware ESXi 6.5.
Which two statements about this upgrade process are true? (Choose two.)

• A. ESXi hosts are upgraded all at the same time.
• B. ESXi hosts are upgraded one after another.
• C. One baseline group must be created using vSphere Update Manager to be used for all ESXi hosts.
• D. Separate baseline groups must be created using vSphere Update Manager for each individual ESXi host.

Answer: AC

NEW QUESTION 9
A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0, and is upgrading the Extreme Network VSP switches to release 7.1.
Which two applications available on the on the MSC would the engineer typically use for the upgrade process? (Choose two.)

• A. Avaya Orchestrator
• B. PuTTY
• C. WinSCP
• D. Enterprise Device Manager

Answer: AD

NEW QUESTION 10
A support engineer is assigned to provide maintenance services for an ACP 4200 4.0 system.
Which type of organization could the engineer expect to be assigned to?

• A. Small Business services
• B. Service Providers
• C. Large Enterprises
• D. Large Enterprises & Service Providers

Answer: C

NEW QUESTION 11
A support engineer logs into the System Manager (SMGR) application on an ACP 4.0 system with the intention of checking VPFM warning messages for the VSP switch. The engineer is unable to see the VPFM link in SMGR.
What could be causing this Problem?

• A. The VPFM link was removed from SMGR as part of the upgrade of the system to ACP 4.0.
• B. The engineer's SMGR account has insufficient access privileges to launch VPFM.
• C. The VPFM link has been renamed as Orchestrator in ACP 4.0.
• D. The engineer should connect to VPFM directly and not through SMGR.

Answer: B

NEW QUESTION 12
As an engineer working with the ACP 4200, you see that the backup plan in place for the virtual machines relies heavily on VMware snapshots.
Which statement describes Avaya's position on using VMware snapshots for a backup solution?

• A. VMware snapshots are the most robust backup solution for the ACP 4200.
• B. VMware snapshots should never be used as a backup and recovery method.
• C. VMware snapshots should be stored off site to ensure business continuity.
• D. VMware snapshots should be stored on the ACP 4200 they are backing up.

Answer: B

NEW QUESTION 13
An ESXi Host server has been replaced due to a fault.
To provide for this replacement, which portion of the Lifecycle Workbook needs to be updated?

• A. Power Cord Wiring
• B. Serial Numbers
• C. Network Data
• D. Switch Wiring

Answer: B

NEW QUESTION 14
A support engineer is planning to migrate to Avaya Orchestrator from POS Applications. What are three tasks required as part of setting up Orchestrator? (Choose three.)

• A. Add to Storage Array.
• B. Add to System Manager.
• C. Change the Web interface’s orchestratoradmin password.
• D. Change the CLI’s root and aoadmin password.
• E. Activate the License.

Answer: BCE

NEW QUESTION 15
Which key consideration is critical when upgrading an application in your ACP 4200 system?

• A. Ensuring that the application server is able to contact http://support.avaya.com
• B. Validating the customer lifecycle workbook information and updating any undocumented changes that were made
• C. Ensuring that you have the latest VSP software installed
• D. Checking the IP Template for the application information and updating it with any changes made to the application

Answer: C

NEW QUESTION 16
Before a switch that has failed can be replaced with a new switch, what needs to be done?

• A. The replacement switch needs to have its configs defaulted.
• B. The remaining switch that is not being replaced needs to have its configs reset to defaults.
• C. The switch can be replaced without any preparation.
• D. The switch needs to have the appropriate backup restored on it.

Answer: A

NEW QUESTION 17
......