HPE0-S60 | How Many Questions Of HPE0-S60 Practice

NEW QUESTION 1
Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?

• A. HPE OneView offers additional functionalities for HPE Primera like CPG management
• B. HPE OneView offers limited support tor HPE Primera because of the firmware differences
• C. To manage HPE Primera using HPE OneVie
• D. a dedicated license is required
• E. Management procedures and features are the same tor both types of the array

Answer: C

NEW QUESTION 2
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?

• A. If HPE OneView credentials are added in vCenter Server
• B. If an compute nodes are added to the vCenter Server
• C. If the HPE Oneview instance Is integrated with HPE OV4VC.
• D. If vCenter Server is licensed in the HPE Oneview interface

Answer: B

NEW QUESTION 3
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.

• A. HPE Composer Maintenance Console
• B. HPE OneView Update Readiness Checker
• C. HPE OneView Global Dashboard
• D. HPE OneView Firmware Compliance Report

Answer: A

NEW QUESTION 4
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?

• A. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
• B. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
• C. All logical interconnects configured using this logical Interconnect group will report inconsistency
• D. All logical interconnects configured using this logical interconnect group will be automatically updated

Answer: A

NEW QUESTION 5
The proposal consists of.
- 3 HPE Synergy 12000 frames
- 6 HPE Composer 2 modules
- 2 HPE Virtual Connect SE 100 GO F32 Module
- 4 HPE Synergy 50 GO interconnect Link Module
Which statements about this proposed design are true? (Select two.)

• A. The selected interconnect modules do not provide the requested WWN virtualization
• B. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules
• C. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules
• D. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added
• E. Remove 4 HPE Composer 2 modules from the design, as they are not required

Answer: BD

NEW QUESTION 6
Refer to the exhibit.

Which statement about this logical JBOD is true?

• A. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
• B. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
• C. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
• D. This logical JBOD can be presented to the compute nodes in a different frame.

Answer: C

NEW QUESTION 7
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards
They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?

• A. Four compute modules must be moved to the second frame to balance the configuration
• B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
• C. A license for an extended logical enclosure must be added to HPE OneView through GUI
• D. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

Answer: D

NEW QUESTION 8
Refer to the exhibit.

Which statement about this logical interconnect group is true?

• A. The master modules are located in the interconnect bays 2 and 5
• B. For the given downlink speed, the maximum number of frames is reached
• C. Both master modules are located in the same HPE Synergy frame
• D. To use interconnect bay set 3, all compute nodes must be half-height

Answer: C

NEW QUESTION 9
Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61
Which statement about this update process is true?

• A. To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.
• B. The customer can update directly to 6,1, but HPE OneView downtime will be longer.
• C. Before updating to 6,1, customer should increase memory size on the HPE Composer.
• D. The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.

Answer: D

NEW QUESTION 10
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

• A. App Volume Set
• B. Storage Container
• C. Virtual Volume Set
• D. virtual Volume

Answer: C

NEW QUESTION 11
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?

• A. Virtual Distributed Switch
• B. vSphere Standard license
• C. Load balancing cluster
• D. Dedicated VMKernel port

Answer: D

NEW QUESTION 12
Which statement about HPE Superdome nPars is true?

• A. Chassis in the same nPar can have different CPU configuration
• B. Rack Management Controller is required Tor nPar configuration
• C. Chassis in the same nPar can have different memory configuration
• D. nPars are supported only with 3rd Generation Intel Xeon Scalable Processors

Answer: C

NEW QUESTION 13
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView. Put the steps to achieve this goal into the coned order in the answer area on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 14
Click the area within the iLO management interface that will allow you to access workload Advisor.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 15
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

• A. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
• B. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
• C. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
• D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities

Answer: A

NEW QUESTION 16
Which statement about an HPE Oneview support dump is true?

• A. Appliance support dump by default contains a logical enclosure support dump
• B. Support dump is a binary file that can be opened only in a dedicated application
• C. Support dump can be created if HPE Virtual Connect modules are installed in the frame
• D. Preview support dump is available only when creating an appliance support dump

Answer: B

NEW QUESTION 17
Your customer plans to deploy VMware vSAN using D3940 Storage Modules. Which statement about this solution is true?

• A. The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.
• B. To use the storage controller that will access D3940 storage modules, a second CPU must be installed.
• C. For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.
• D. All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured

Answer: A

NEW QUESTION 18
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays
Where should you start the troubleshooting process?

• A. At the iLO interface to verify whether the ILO Advanced license is properly applied
• B. At HPE OneView Interface to verify whether the server is In the maintenance mode
• C. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
• D. At HPE OneView Interface to verify whether the iLO processor is disabled

Answer: A

NEW QUESTION 19
Your customer needs to move an application from an HPE Synergy 480 Gen10 Compute Module to an HPE Synergy 660 Gen 10 Compute Module. The 480 has a switch that has been manually zoned outside of HPE OneView.
What must the customer do before migrating the application?

• A. Migrate the application to a Logical JBOD and connect it to the new server
• B. Copy the server profile and assign the clone to the new hardware
• C. Edit the server profile and change server hardware type
• D. Create a new server profile template and apply to the new hardware

Answer: C

NEW QUESTION 20
Your customer uses HPE OneView to manage their HPE Synergy environment. They plan to use it to manage a new set equipment that includes.
- 20 HPE ProLiant DL365 Gen10 Plus servers
- 20 HPE ProLiant DL380 Gen10 Plus servers
- 5 HPE Primera 650
- 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)

• A. HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView
• B. HPE MSA 2062 Storage Array is not supported in HPE OneView
• C. HPE OneView replaces array management tools for both types of array
• D. HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included
• E. HPE Primera 650 can be managed using HPE OneView.

Answer: AD

NEW QUESTION 21
......