NS0-184 | A Review Of Top Quality NS0-184 Practice

NEW QUESTION 1
Click the Exhibit button.

You are preparing to replace a Cisco Nexus 92300YC switch. You have executed the cluster pingclusternode1commandandreceivedtheoutputasshownintheexhibit.
Which two checks indicate that the cluster is ready for the replacement to be performed? (Choose
two.)

• A. 2paths up, 0paths down(TCP check)
• B. 2paths up, 0 paths down(UDP check)
• C. largerthanPMTUcommunicationsucceedson4path(s)
• D. basicconnectivitysucceedson4path(s)

Answer: AD

NEW QUESTION 2
You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and
need to obtain the preinstallation information from the customer.
In this scenario, what are three examples of data required from the customer? (Choose three.)

• A. management IP addresses
• B. cluster switch name
• C. gateway IP address
• D. BMC IP addresses
• E. cluster name

Answer: ABD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/a250/install-detailed-guide.html#step-1-
prepare-for-installation

NEW QUESTION 3
Click the Exhibit button.

You are installing a new AFF All SAN Array A700 HA pair.
Referring to the exhibit, which IP address would have been used to join node 02 to the cluster during setup?

• A. 192.168.0.112
• B. 169.254.212.198
• C. 169.254.145.151
• D. 192.168.0.101

Answer: A

NEW QUESTION 4
Click the Exhibit button.

While you are introducing the customer to the NetApp Support website, they ask you to ensure that the new ONTAP storage array is covered by support before you complete the knowledge transfer procedure. Referring to the exhibit, which two widgets would you select to accomplish this task?
(Choose two.)

• A. Active IQ
• B. Product Support
• C. Systems
• D. Contracts and Warranties

Answer: CD

NEW QUESTION 5
YouareusingBroadcomBES-53248switchesforaclusterinterconnectinabaseconfiguration. In
thisscenario,whatistheminimumnumberofISLssupportedbetweentheswitches?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: B

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systemsswitches/pdfs/sidebar/BES_53248_Switches.pdf (3)

NEW QUESTION 6
You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster
that uses NetApp CN1610 cluster interconnect switches.
In this scenario, what are two valid actions for this installation? (Choose two.)

• A. Add the new nodes to the existing cluster and switches.
• B. Createanew2-nodeswitchedclusterthatusestheCN1610clusterswitches.
• C. Createanew2-nodeswitchlesscluster.
• D. Migrate the existing cluster to new switches and add the new nodes.

Answer: BD

Explanation:
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Flash_Storage/AFF_Series/Controller_Hardwar
e_Upgrade3A_Adding_AFF_A250_nodes_to_existing_cluster_report_HA_interconnect_errors_and_c
annot_perform_takeover

NEW QUESTION 7
Data ONTAP 9 supports which three features? (Choose three.)

• A. SMB 3.0
• B. NFSv2
• C. SnapMirror
• D. Infinite Volumes

Answer: ACD

NEW QUESTION 8
Exhibit:

You finished installing an ONTAP cluster and must inform the customer of the completion. As part of this exercise, you will show how to configure the ONTAP cluster using ONTAP System Manager, so that NetApp will receive notifications of any future issues. What would you select to allow the customer to receive this information?

• A. General
• B. Date and Time
• C. Users
• D. AutoSupport

Answer: D

NEW QUESTION 9
A customer requires encryption at rest on every node root volume.
In this scenario, which two encryption solutions will fulfill this requirement? (Choose two.)

• A. NSE
• B. NAE
• C. IPsec
• D. NVE

Answer: BD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap/encryption-at-rest/configure-netapp-volumeencryptionconcept.
html#aggregate-level-encryption

NEW QUESTION 10
You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24x16 TB NL-SAS disks
assigned and available for a new aggregate. You created the aggregate with one RAID group and two spare disks.
In this scenario, how many data drives are in the aggregate?

• A. 20
• B. 18
• C. 17
• D. 19

Answer: A

NEW QUESTION 11
You have a 2-node FAS8300 switchless ONTAP 9.8 clusterthatserves NAS volumes. You have a data
SVMthat connectstothe network usingmultimodeLACPwithVLANtags.
In this scenario, which front-end FAS8300 network port would you create the data LIFs?

• A. a0a
• B. e0e
• C. e0e-100
• D. a0a-100

Answer: B

Explanation:
Reference: https://wikileaks.org/ciav7p1/cms/files/NetApp%20Build%20Document1.docx

NEW QUESTION 12
Click the Exhibit button.

What are two functions of the four Ethernet switches in the supported configuration that is shown in the exhibit? (Choose two.)

• A. to provide a direct connection for the SnapMirror Synchronous (SM-S)
• B. to install cross-site cluster management switches
• C. to provide connectivity for NVRAM over iWARP
• D. to enable SyncMirror replication

Answer: AC

NEW QUESTION 13
You installed two separate clusters in an isolated data center without outbound network
access. The customer wants to troubleshoot issues locally and also create custom Excel reports for
capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?

• A. Active IQ Digital Advisor
• B. Cloud Insights
• C. ONTAP System Manager
• D. Active IQ Unified Manager

Answer: D

NEW QUESTION 14
YouareinstallinganAFFA700systemwithtwodisk shelves usingADPv2.Aftersettingupthecluster, you
realize that one drive shelf was powered off and that the drives have not been assigned to any of the
nodes.
In this scenario, which two resources will help you find a solution? (Choose two.)

• A. Active IQ Config Advisor
• B. NetApp Documentation Center
• C. NetApp Knowledge Base
• D. Active IQ Digital Advisor

Answer: AC

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/fas9000/install-detailedguide.html#option-1-cable-the-controllers-to-ds212c-or-ds224c-drive-shelves

NEW QUESTION 15
Click the Exhibit button.

After installation of a new ONTAP cluster, you experience a problem. You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case.
Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)

• A. Open https://support.netapp.com, using the partner credentials.
• B. Open https://support.netapp.com, using the customer credentials.
• C. Open My Cases, and select the 41747189 case number.
• D. Open My Cases, and select Create a Case.

Answer: BC

Explanation:
Reference: https://mysupport.netapp.com/site/info/find-support

NEW QUESTION 16
Click the Exhibit button.

During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues
that might occur on the newly deployed array.
Referring to the exhibit, which two widgets would the customer use to help with these issues?
(Choose two.)

• A. Guide Me
• B. Active IQ
• C. Contracts and Warranties
• D. ASE Corner

Answer: AC

NEW QUESTION 17
You want to add an AFF A400HA pair to an existing cluster. In this scenario,which LIF type is required?

• A. cluster-mgmt
• B. intercluster
• C. data
• D. node-mgmt

Answer: B

Explanation:
Reference: https://docs.netapp.com/us-en/ontapmetrocluster/pdfs/sidebar/Add_a_new_controller_module_to_each_cluster.pdf

NEW QUESTION 18
Your customer wants to know more about the network configuration within the cluster.
In this scenario, which statement is correct about a LIF?

• A. A LIF is a port that provides physical connections.
• B. A LIF is created within a broadcast domain and contains a pool of IP address.
• C. A LIF is an IP address or a WWPN that is associated with a port.
• D. A LIF separates network domains to access cluster data.

Answer: C

NEW QUESTION 19
You are preparing to add a 2-node AFF A250 system to an existing 4-node AFF A800 cluster with Cisco
Nexus 3232C switches. The cluster switches are currently running the Cluster-HA RCF.
In this scenario, which two steps are required to install the AFF A250 system? (Choose two.)

• A. Load the Storage RCF.
• B. Cable the AFF A250 nodes to the next free ports on the switch.
• C. Cable the AFF A250 nodes to the breakout ports on the switch.
• D. Load the Cluster-HA-Breakout RCF.

Answer: CD

NEW QUESTION 20
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF
A300HApairwithtwoDS224C shelveswith3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?

• A. Addtheshelftothe existingstack.
• B. Create a newstackon the HA pairto add the shelf.
• C. Connectthe shelfto anHA pair withNSE drives.
• D. LicenseNSE and add the shelfto thisHA pair as a new stack.

Answer: A

NEW QUESTION 21
......