1Z0-489 | The Latest Guide To 1Z0-489 exam
Q41. Use of the Enterprise Installation Standards (EIS) methodology provides a way to
A. Create a framework for tracking improperly installed systems
B. Produce consistent, high-quality installations
C. Produce systems optimized for Oracle software departments
D. Create a framework for tracking properly installed systems
Answer: C
Q42. Using the SP ILOM commands to list properties, which command would you use to find out the mapping for all CMU boards in physical Domain 1 to the CPUs?
A. show /Servers/Pdomains/Pdomain.l/System/Processors -level 3 location
B. show / Servers/Pdomains/Pdomain_l/DCUs -level 3 location
C. show /Servers/Pdomains/Pdomain_l/SP/Processors -level 2 location f
D. show /System/Processors/C PUs -level 2 location
Answer: A
Reference:
https://docs.oracle.com/cd/E24355_01/pdf/E41218.pdf
Q43. You power –on PDomain0 and notice that it does not go through POST, Examine the following output:
In order for this to go through post, which property needs to be changed?
A. level
B. mode
C. power_on_level
D. error_reset_level
Answer: C
Q44. Which three options are memory population rules of the SPARC M5-32 server when mixing DIMMs?
A. Populate each CMU with DIMMs of the same size or rank.
B. Mix different DIMM sizes on different CMU boards in the same DCU.
C. DIMMs in the same position (0, 1, 2, or 3) within a CMU must be homogeneous (that is, the sametype, same dram capacity, and same rank).
D. Mixing of different DIMM sizes is allowed, as long as homogeneous types are populated per CPUsocket.
E. When mixing DIMMs, large-sized DIMMs need to be put in position 0, 1, 2, or 3.
Answer: B,C,E
Q45. During a site visit to a customer who has three SPARC M5-32 platforms, which two actions would you take to confirm each platform serial number?
A. Visually check for the chassis serial number label at the front lower left – hand side.
B. Using the SP on each platform to access the ILOM, run show /system serial_ number.
C. Visually check for the chassis serial number label at the front upper right-hand side.
D. Using the SP on each platform to access the ILOM, run show /systemsystem_ identification.
E. Visually check for the chassis serial number label at the rear, towards the top, in the middle.
Answer: B,D
Reference:
https://docs.oracle.com/cd/E19203-01/820-1188-12/core_ilom_overview.html
Q46. You run the following command:
-> sec /HOSTO/bootmode script=”setenv auto-boot? False"
You notice on subsequent resets that Solaris boots in the domain. What are three possible
reasons for this?
A. This is a one-time setting.
B. The default setting for auto-boot? is True.
C. Keyswitch is set to Normal.
D. auto-boot? returns to its default setting at the next reset.
E. Keyswitch is set to Locked.
Answer: A,B,E
Reference:
http://docs.oracle.com/cd/E22985_01/html/E22986/z40004eb1395746.html
Q47. You need to record a system’s serial number. What command do you run to see it?
A. show /System model
B. show /SP network
C. show /System serial_number
D. show /SP hostname
E. show /System part number
Answer: C