1Z0-489 | A Review Of Pinpoint 1Z0-489 examcollection


Q11. Which three statements are correct about the front and rear panels on SPARC M5-32 servers? 

A. The Component LED on the front panel and rear panel is the same, and you can monitor the front and rear components from both sides of the machine. 

B. You can find the Service Key on the rear panel. 

C. You can find the Power/Standby button on the front panel. 

D. The rear panel is primarily for showing status, not the control button or key on the rear panel. 

E. The front panel and rear panel are the same; you can monitor or control the server through either one. 

Answer: A,C,E 

Q12. Which three virtualization options or technologies are included in the SPARC M5-32 server? 

A. Hyper-V hypersior 

B. Physical domain (PDomain or PDom) 

C. LDom (that is, Oracle VM for SPARC) 

D. Oracle Solaris Zones (for OS virtualization) 

E. Oracle VMware 

Answer: C,D,E 

Reference: 

http://www.oracle.com/technetwork/server-storage/sun-sparc-enterprise/documentation/o13-056-m5-domaining-1991544.pdf 

Q13. Which three statements are correct about installing DIMMS? 

A. Be sure that you are properly grounded before inserting the DIMM(s) in the socket(s). 

B. If a DIMM slot LED is lit, press the Fault Remind button to turn off the LED. 

C. When replacing a faulty CMU, you do not need to keep DIMMs in the same locations on thereplacement CMU, because the server has an intelligent load-balance feature. 

D. When you press the DIMM Fault Remind button, the slot for a faulty DIMM is lit. 

E. If a DIMM slot LED is lit, the fault is cleared only by the reset command In JLOM. 

Answer: B,C,D 

Q14. When SunVTS has completed its testing, where do you find the log files? 

A. /var/logs 

B. /var/sunvts/logs 

C. /var/adm/sunvts/messages 

D. /var/sunvts/messages 

Answer:

Reference: 

https://docs.oracle.com/cd/E19469-01/819-4363-12/sunvts_diag_x4540.html 

Q15. Where do you perform the completion of ASR activation? 

A. MOS 

B. ASR Client 

C. ASR Manager 

D. SP 

Answer:

Reference: 

https://docs.oracle.com/cd/E37710_01/install.41/e18475/ch2_asr_manager.htm 

Q16. You enter the following command from the service processor; start /HOSTO/console.What does this accomplish? 

A. Log in to the domain as user root via the console. 

B. Log In to the host as user root from another system. 

C. Confirm that the boot disk configuration is as expected. 

D. Connect to the console from the ACTIVE SP. 

Answer:

Reference: 

https://docs.oracle.com/cd/E19720-01/820-1188-12/core_ilom_appa.html 

Q17. You need to power down HOST 1 to add additional memory to a CMU. Which command do you execute? 

A. power -off /HOST1 

B. set keyswitch off /HOSTI 

C. power /HOST1 off 

D. stop /HOSTI 

Answer:

Reference: 

http://docs.oracle.com/cd/E24355_01/html/E41214/z4000f4d1453042.html 

Q18. You have just closed a deal with a customer and are now ready to move into the installation phase of me sales and delivery cycle. For which two reasons is using the Enterprise Installation Standards (EIS) documentation suite important in performing your customer installation? 

A. ensures all decisions about what the customer wants are clarified well before the installation starts 

B. supports the goal of consistent, high-quality installations 

C. provides a way to document what team performs what service 

D. enables the customer to easily see what has been defined and make changes as needed 

Answer: B,C 

Reference: 

https://docs.oracle.com/cd/E19203-01/820-1188-12/core_ilom_overview.html 

Q19. A “cold” system is placed into a computer center (cooling air/normally approximately 20° C168" F). With power on, the chip/layer temperature rapidly becomes close to room temperature, because the overall system is not being cooled due to the fact that the "cooling" air is warmer than the "cold" system. In such a scenario, the "warming up" period is probably complete within only 1-2 hours. 

What are two possible outcomes of this scenario? 

A. inability to power-on the system after it is acclimatized 

B. long-term damage (hair-cracks) on the computer boards 

C. intermittent equipment failure 

D. lack of network connectivity after it is booted 

Answer: B,D 

Reference: 

https://docs.oracle.com/cd/E19658-01/820-6175-12/install_pwr_on.html 

Q20. You need to run a snapshot to collect SP data. Which two options you can dump the snapshot to? 

A. HTTP 

B. SFTP 

C. HTTPS 

D. FTP 

Answer: B,D 

Reference: 

https://docs.oracle.com/cd/E20815_01/html/E20894/gjfxt.html