1Z0-879 | The Update Guide To 1Z0-879 examcollection
Q181. After creating a zone using the following:
zonecfg -z newzone
zonecfg:newzone> create
zonecfg:newzone> set zonepath=/export/zone/newzone
zonecfg:newzone> add net
zonecfg:newzone:net> set address=192.168.0.2
zonecfg:newzone:net> set physical=bge0
zonecfg:newzone:net> end
Which command should you run next?
A. zoneadm -z newzone boot
B. zoneadm -z newzone ready
C. zonecfg -z newzone check
D. zoneadm -z newzone install
Answer: D
Q182. Given the line from a name service configuration file:
ethers: nis [UNAVAIL=return] files
Which two statements correctly describe the behavior of the name service switch? (Choose two.)
A. If the NIS server does NOT respond, the search for the ethers entry will end without looking in the local file.
B. If NIS does respond, but does NOT find the appropriate entry in its ethers map, the search will end without looking in the local file.
C. If NIS does respond, but does NOT find the appropriate entry in its ethers map, the search will continue by looking for it in the local file.
D. If the NIS server does NOT respond, the search for the ethers entry will continue by looking for it in the local file.
Answer: A,C
Q183. Given:
dhcp-100 -> dhcp-105 FTP R port=32990 220 dhcp-100 ... dhcp-105 -> dhcp-100 FTP C port=32990
dhcp-105 -> dhcp-100 FTP C port=32990 USER root\r\n dhcp-100 -> dhcp-105 FTP R port=32990
dhcp-100 -> dhcp-105 FTP R port=32990 331 Password require dhcp-105 -> dhcp-100 FTP C port=32990
dhcp-105 -> dhcp-100 FTP C port=32990 PASS root\r\n dhcp-100 -> dhcp-105 FTP R port=32990
dhcp-100 -> dhcp-105 FTP R port=32990 530 Login incorrect. dhcp-105 -> dhcp-100 FTP C port=32990 SYST\r\n
Which two statements are true? (Choose two.)
A. The password for root on dhcp-105 is root.
B. A user on dhcp-100 cannot log in to dhcp-105.
C. A user on dhcp-100 successfully logged in to dhcp-105.
D. A user on dhcp-105 is trying to connect using ftp to dhcp-100.
E. A user on dhcp-105 is trying to log in to dhcp-100 with root id.
Answer: D,E
Q184. Given the following entry from the default /etc/syslog.conf file:
If loghost is defined as a remote system, which two statements are true? (Choose two)
A. The mail. info messages are ignored.
B. The user .err messages are sent to loghost.
C. The mail .debug messages are logged to the /var/iog/syslogfile on the loghost.
D. The mail .crit messages are logged in the /var/adm/messages file and are sent to loghost.
E. The mail .emerg messages are logged to the /var/adm/messagesfile, and all logged in users are notified.
Answer: D,E
Q185. The print server on the network has one print spooler defined, called printer1. You have a requirement to modify the shell script that actually sends the jobs associated with printer1 to the printer.
Which file should you modify?
A. /etc/printers.conf
B. /var/spool/lp/requests/printer1
C. /etc/lp/interfaces/printer1
D. /usr/lib/lp/postscript/postprint
Answer: C
Q186. You have received notice that all servers must be setup Secure by Default. During the installation of the Solaris OS, you made the selection to "disable network services", making the system Secure by Default. Which network services will be enabled for remote clients when the system is running at the multi-user-server milestone?
A. ftpd
B. sshd
C. statd
D. lockd
E. syslogd
Answer: B
Q187. When displaying the current crash dump configuration on your server, the following information is presented:
Dump content: all pages Dump device: /dev/dsk/c0d0s7 Savecore directory: /var/crash/unknown Savecore enabled: no
Given the above information, which of the following answers describe your system current configuration?
A. The dump content is set to all of the kernel memory pages only.
B. The dump device is set to partition c0d0s7 and the next time the server crashes, the dump content will be sent to c0d0s7
C. The savecore command will run automatically on reboot.
D. The savecore command will NOT run automatically on reboot.
Answer: D
Q188. There is a project that requires a large number of systems to be re-installed on the network. Each installation needs to be hands off and tailored to the task for which the system is intended. Which installation method allows for the specific tailoring of these installs?
A. Solaris Live Upgrade software
B. Solaris OS installed from a tape device
C. an install from a single Solaris Flash archive
D. Custom JumpStart Installation
Answer: D
A junior administrator is troubleshooting a user's workstation. The workstation will NOT boot from its Solaris 10 OS disk. After booting the system from CD-ROM, the junior administrator sends you an email that includes the following text that was retrieved from the workstation console:
* /dev/rdsk/c0t0d0s2 partition map *
* Dimensions:
* 512 bytes/sector
* 63 sectors/track
* 16 tracks/cylinder
* 1008 sectors/cylinder
* 17662 cylinders
* 17660 accessible cylinders *
* Flags:
* 1: unmountable
* 10: read-only *
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory 0 2 00 1049328 9024488 10073815 / 1 3 01 0 1049328 1049327 2 5 00 0 17801280 17801279 4 7 01 10073816 5627354 15701168 /var 5 8 00 15701169 2100110 17801279 /home
A. Slice 0 is classified as unmountable.
B. Slice 4 is classified as unmountable.
C. This output was produced by the following command: prtvtoc /dev/rdsk/c0t0d0s2.
D. This output was produced by the partition command in the format utility.
E. This output was produced by the following command: cat /etc/mnttab.
Which two statements are true? (Choose two.)
Answer: B,C
Q189. You created a backup using a file system snapshot. Now that the backup is done, you can delete the snapshot and remove the backing store file. If you forget which backing store file is in use, which command can provide you with this information?
A. /usr/sbin/df
B. /usr/sbin/mount
C. /usr/sbin/fssnap
D. /usr/lib/fs/ufs/fssnap
Answer: D
Q190. You recently performed a standardization project that ensures all SPARC-based systems boot from the same device aliases. The boot device order needs to be changed from vxdisk net to rootdisk net.
Which OBP command removes the old vxdisk alias?
A. nvunalias vxdisk
B. setenv alias vxdisk
C. nvunalias rootdisk
D. unset vxdisk
E. unalias vxdisk
Answer: A