1Z0-879 | Practical Oracle 1Z0-879 exam dumps


Q101. Which command is used to return information about registered RPC services on a specified <host>? 

A. svcs -p <host> B. inetadm <host> C. rpcinfo -p <host> 

D. View the /etc/services file on <host> 

Answer:

Q102. Given these settings on your x86-based server: You connected a console to the serial port (COM1) and you want to setup your server so that it uses the console that you connected.  Which describes how to make the system recognize the console for bootup and not the VGA monitor and keyboard? 

A. Set the console property to ttya as follows: kernel /platform/i86pc/multiboot -B console=ttya 

B. The x86 platform does not support booting from a serial port. 

C. Select to boot from the Solaris Serial Console ttya in the GRUB menu. 

D. Change the PROM settings so that kbd-type=serial, ttya-mode matches the port settings for the new console, and console=ttya 

E. No changes to the PROM are required. Shutdown the system and disconnect the VGA monitor and keyboard before booting. The system console will default to the serial port. 

Answer:

Q103. To configure a system as a DNS client during system installation, which three items, will be requested? (Choose three). 

A. domain name for this client 

B. IP address of the primary DNS server 

C. node name for the primary DNS server 

D. user name to use for node name queries 

E. domains in which to search for node names 

F. password to access the primary DNS server 

Answer: A,B,E 

Q104. You need to do a restore of a damaged /usr file system on your x86-based server running Solaris 10 OS. Which procedure do you complete to get into single user mode on your system to perform the restore? 

A. Boot from the DCA and select Hard Disk as your boot device. 

B. Boot from the hard disk into single user mode. 

C. Boot from the CD-ROM or DVD, and when prompted at the Current Boot Paremeters menu, type b -s. 

D. Boot from the CD-ROM or DVD, and when prompted at the ok prompt, type boot -s. 

Answer:

Q105. Given this line in the /etc/syslog. conf file: 

*.debug @loghost 

Which messages are forwarded to loghost? 

A. all messages 

B. all messages of severity debug 

C. all messages NOT matched by other lines D. all messages of severity debug NOT matched by other lines 

Answer:

Q106. When will Solaris Volume Manager software volumes continue to function normally in the event of the corruption of one copy of its state database? 

A. when the master copy of the state database is NOT corrupted 

B. when the copy of the state database on the boot disk is available 

C. when more than half of the copies of the state database are available 

D. when NOT more than a single copy of the state database is corrupted 

Answer:

Q107. You have been requested to supply a list of the Solaris software cluster groups for a project. Which command produces the required information? 

A. cat /etc/cluster 

B. cat /var/sadm/install_data 

C. grep METACLUSTER /etc/release 

D. cat /var/sadm/system/admin/CLUSTER 

E. grep METACLUSTER /var/sadm/system/admin/.clustertoc 

Answer:

103. You have been requested to supply a list of the Solaris software cluster groups for a project. Which command produces the required information? 

A. cat /etc/cluster 

B. cat /var/sadm/install_data 

C. grep METACLUSTER /etc/release 

D. cat /var/sadm/system/admin/CLUSTER 

E. grep METACLUSTER /var/sadm/system/admin/.clustertoc 

Answer:

Q108. The administrator of the dbzone zone has requested a dedicated file system on which to install a database. The administrator requests that this be mounted as /database within the zone. 

The host system has a metadevice d120 that has been allocated for dedicated use for this purpose. 

The dbzone zone is currently NOT booted. 

# zonecfg —z dbzone 

zonecfg:dbzone > add fs 

zonecf g:dbzone:f s > 

Which four commands are necessary to complete the administrator's request? (Choose four.) 

A. set type=ufs 

B. set special=rw 

C. set dir=/database 

D. set raw=/dev/md/rdsk/dl20 

E. set special=/dev/md/dsk/dl20 

F. add inherit—pkg—dir dir=/database 

G. set zonedir=/export/dbzone/database 

Answer: A,C,D,E 

Q109. Your server has been crashing intermittently for unknown reasons. Youtfie been told to start saving the information from the crash in the /var/crash directory (c0tid0s4) so that a technician can analyze the problem. Your crash dump configuration file has the following entries: 

Dump content: all pages Dump device: /dev/dsk/c0d0s1 (swap) Savecore directory: /var/crash/ Savecore enabled: no 

After the most recent crash, you went into the /var/crash directory to look for the dump file and the directory was empty. What would you need to do to get the system to store the system crash dumps in the /var/crash directory? 

A. coreadm -p /dev/dsk/c0d0s4 

B. coreadm —y 

C. dumpadm —s /dev/dsk/c0d0s4 

D. dumpadm -y 

Answer:

Q110. One of the primary benefits of zones is the ability to share common executables and data from the global zone with local zones. 

What model is this? 

A. Thin Zone Model 

B. Slim Zone Model 

C. Whole Root Model 

D. Skinny Zone Model 

E. Sparse Root Model 

F. Light Weight Root Model 

Answer: