201 | All About 100% Correct 201 Simulations

NEW QUESTION 1
A BIG-IP system has the following configuration:
* SNAT is set to Auto Map
* There are two VLANs internal and external
* Default route is pointed to the gateway on external VLAN
* Self P for internal VLAN is 1921.1.2
* Self IP for external VLAN is 192.1.2.2
* Floating IP addresses for internal VLAN is 192.1.1.1
* Floating IP addresses for external VLAN is 192.1.2.1
* The Virtual Server IP address is 192.1.1.100
Which IP address does the BIG-IP system use first when traffic reaches the servers on the internal VLAN?

• A. 192.1.1.100
• B. 192.1.2.2
• C. 192.1.1.1
• D. 192.1.2.1

Answer: C

NEW QUESTION 2
A virtual server is listening at 10.10.1.100:any and has the following iRule associated with it: when CLIENT_ACCEPTED { if {[TCP::local_port] equals 21 } { pool
ftppool } elseif {[TCP::local_port] equals 23 } { pool telnetpool }
If a user connects to 10.10.1.100 and port 22, which pool will receive the request?

• A. ftppool
• B. telnetpool
• C. Non
• D. The request will be dropped.
• E. Unknow
• F. The pool cannot be determined from the information provided.

Answer: D

NEW QUESTION 3
A BIG-IP Administrator plans to resolve a non-critical issue with a BIG-IP device in 2 weeks. What Severity level should be assigned to this type of F5 support ticket?

• A. 4
• B. 2
• C. 3
• D. 1

Answer: A

NEW QUESTION 4
A BIG-IP Administrator plans to upgrade a BIG-IP device to the latest TMOS version.
Which two tools could the administrator leverage to verify known issues for the target versions? (Choose two.)

• A. F5 University
• B. F5 Downloads
• C. F5 End User Diagnostics (EUD)
• D. FSiHealth
• E. F5 Bug Tracker

Answer: DE

Explanation:
F5 University -- F5 learning materials F5 Downloads - iso download page
F5 End User Diagnostics (EUD) -- Hardware detection

NEW QUESTION 5
A new BIG-IP VE is deployed with default settings. The BIG-IP Administrator completes the setup utility in the Configuration Utility. The internal self IP address fails to respond to a ping request. What is a possible cause of this issue?

• A. Port lockdown on internal self IP is set to Allow None
• B. Route is NOT assigned to internal self IP.
• C. Internal interface VLAN is set to untagged
• D. Internal interface VLAN is set to tagged

Answer: D

NEW QUESTION 6
A standard virtual server has been associated with a pool with multiple members. Assuming all other settings are left at their defaults, which statement is always true concerning traffic processed by the virtual server?

• A. The client IP address is unchanged between the client side connection and the serverside connection.
• B. The server IP address is unchanged between the client side connection and the serverside connection.
• C. The TCP ports used in the client side connection are the same as the TCP ports serverside connection.
• D. The IP addresses used in the clientside connection are the same as the IP addresses used in the serverside connection.

Answer: A

NEW QUESTION 7
A BIG-IP Administrator discovers malicious brute-force attempts to access the BIG-IP device on the management interface via SSH. The BIG-IP Administrator needs to restrict SSH access to the
management interface.
Where should this be accomplished?

• A. System > Configuration
• B. Network > Interfaces
• C. Network > Self IPs
• D. System > Platform

Answer: D

NEW QUESTION 8
A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator tries to restore a UCS taken from the previous device, but the restore fails. The following error appears inthe/var/log/itm.
mcpd [****J: •*****»;0; License is not operational (expired or digital signature does not match contents.)
What should the BIG-IP Administrator do to avoid this error?

• A. Use the appropriate tmsh command with the no-license option
• B. Revoke the license prior to restoring
• C. Reactivate the license on the new device using the manual activation method
• D. Remove the license information from the UCS archive

Answer: A

NEW QUESTION 9
What should the 816-IP Administrator provide when opening a new ticket with F5 Support?

• A. bigip.license file
• B. QKViewfile
• C. Device root password
• D. SSL private keys

Answer: B

NEW QUESTION 10
A BIG-IP Administrator needs to determine which pool members in a pool have been manually forced offline and are NOT accepting any new traffic. Which status icon indicates this?
A)
B)
C)
D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: A

NEW QUESTION 11
Refer to the exhibit.
Which two pool members should be chosen for a new connection? (Choose two.)

• A. 172.16.15.9.80
• B. 172.16.15.4.80
• C. 172.10.15.2.80
• D. 172.16.15.1.80
• E. 172.16.15.7.80

Answer: BE

NEW QUESTION 12
On the VCMP system, a BIG-IP host administrator imports a new ISO image into the host's /shared/images folder. The new ISO images that reside on the vCMP host are available for installation on the guest. How should the BIG-IP Administrator install one image from within the guest?

• A. Install the new software on the host and wait for it to automatically be installed on all guests.
• B. Run the following command on guesttmsh install sys software block-device-image image_name volume < volume_name>
• C. Run the following command on guesttmsh install sys software image image_name volume < volume_name>
• D. Run the following command on hosttmsh install sys software block-device-image image_name volume < volume_name>

Answer: D

NEW QUESTION 13
A BIG-IP Administrator is working with a BIG-IP device and discovers that one of the Interfaces on a Trunk is DOWN.
What is the reason for this Interface status?

• A. The switch is NOT connected to the Interface
• B. There is NO transceiver installed on the Interface
• C. There is NO default route configured for this trunk
• D. The media speed of the interface has NOT been set

Answer: A

NEW QUESTION 14
Refer to the exhibit.

Which Pool Members are receiving traffic?

• A. Serv1, serv2,serv3, serv4
• B. serv1, serv3
• C. serv1, serv3, serv4
• D. serv1

Answer: C

NEW QUESTION 15
Which statement is true regarding failover?

• A. Hardware failover is disabled by default.
• B. Hardware failover can be used in conjunction with network failover.
• C. If the hardware failover cable is disconnected, both BIGIP devices will always assume the active role.
• D. By default, hardware fail over detects voltage across the failover cable and monitors traffic across the internal VLAN.

Answer: B

NEW QUESTION 16
A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity. The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?

• A. Round Robin
• B. Dynamic Ratio
• C. Ratio
• D. Least Connection

Answer: C

NEW QUESTION 17
A BIG-IP Administrator needs to modify a virtual server that web offload web traffic compression tasks from the target server.
Which two profiles must the BIG-IP Administrator apply to a virtual server to enable compression? (Choose two)

• A. Server SSL profile
• B. Stream profile
• C. Persistence profile
• D. HITP profile
• E. Compression profile

Answer: DE

NEW QUESTION 18
Refer to the exhibit.

A BIG-IP Administrator creates a new Virtual Server. The end user is unable to access the page. During troubleshooting, the administrator learns that the connection between the BIG-IP system and server is NOT set up correctly.
What should the administrator do to solve this issue?

• A. Disable Address Translation
• B. Set Address Translation to Auto Map, configure a SNAT pool, and have pool members in the same subnet of the servers
• C. Set Address Translation to SNAT and configure a specific translation address
• D. Set Address Translation to SNAT and have self-IP configured in the same subnet of servers

Answer: C

Explanation:
The status of the pool can be seen that the members are all up, indicating that the network from F5 to the server is no problem, so there is no need to configure selfip on the same subnet. The monitor is normal but the access is not normal, you have to consider the problem of snat, you can configure automap or configure snat and specify snat ip.

NEW QUESTION 19
......