300-075 | Update 300-075 Exam Study Guides With New Update Exam Questions


P.S. High value 300-075 torrent are available on Google Drive, GET MORE: https://drive.google.com/open?id=1wjr6WINeoF1GfJJTEUwbsPxy_oz_OK6s


New Cisco 300-075 Exam Dumps Collection (Question 12 - Question 21)

Q12. A CUCM cluster has been set up with one to one (1:1) call processing redundancy. What two occurrences will seen when the primary subscriber fails? (Choose two)

A. The secondary subscriber will start its CallManager service

B. 40 SCCP phones per second will be able to register to the secondary subscriber.

C. The secondary subscriber will start its TFTP service

D. 125 SCCP phones per second will be able to register to the secondary subscriber.

E. 40 SIP phones per second will be able to register to the secondary subscriber.

F. 125 SIP phones per second will be able to register to the secondary subscriber

Answer: D,E

Q13. Which three statements about configuring an encrypted trunk between Cisco TelePresence Video Communication Server and Cisco Unified Communications Manager are true? (Choose three.)

A. The root CA of the VCS server certificate must be loaded in Cisco Unified Communications Manager.

B. A SIP trunk security profile must be configured with Incoming Transport Type set to TCP+UDP.

C. The Cisco Unified Communications Manager trunk configuration must have the destination port set to 5061.

D. A SIP trunk security profile must be configured with Device Security Mode set to TLS.

E. A SIP trunk security profile must be configured with the X.509 Subject Name from the VCS certificate.

F. The Cisco Unified Communications Manager zone configured in VCS must have SIP authentication trust mode set to On.

G. The Cisco Unified Communications Manager zone configured in VCS must have TLS verify mode set to Off.

Answer: A,C,E

Q14. Which two options should be used to create a secure traversal zone between the Expressway-C and Expressway-E? (Choose two.)

A. Expressway-C and Expressway-E must trust each other's server certificate.

B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.

C. A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.

D. Enable username and password authentication verification on Expressway-E.

E. Create a set of username and password on each of the Expressway-C and Expressway- E to authenticate the neighboring peer.

Answer: A,C

Q15. Which statement about setting up FindMe in Cisco TelePresence Video Communication Server is true?

A. Users are allowed to delete or change the address of their principal devices.

B. Endpoints should register with an alias that is the same as an existing FindMe ID.

C. If VCS is using Cisco TMS provisioning, users manage their FindMe accounts via VCS.

D. A VCS cluster name must be configured.

Answer: D

Q16. Scenario:

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.

The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.

DP:

Locations:

CSS:

SRST:

SRST-BR2-Config:

BR2 Config:

SRSTPSTNCall:

After configuring the CFUR for the directory number that is applied to BR2 phone (+442288224001), the calls fail from the PSTN. Which two of the following configurations if applied to the router, would remedy this situation? (Choose two.)

A. dial-peer voice 1 pots

incoming called-number 228822u2026 direct-inward-dial

port 0/0/0:15

B. dial-peer voice 1 pots

incoming called-number 228822u2026 direct-inward-dial

port 0/0/0:13

C. voice translation-rule 1 rule 1/228821....S//+44&/ exit

!

voice translation-profile pstn-in translate called 1

!

voice-port 0/0/0:15

translation-profile incoming pstn-in

D. voice translation-rule 1 rule 1/228822....S//+44&/ exit

!

voice translation-profile pstn-in translate called 1

!

voice-port 0/0/0:15

translation-profile incoming pstn-in

E. The router does not need to be configured.

Answer: A,D

Q17. What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence endpoints?

A. CS3 (24)

B. EF (46)

C. AF41 (34)

D. CS4 (32)

Answer: D

Q18. The administrator at company X is trying to set up Extension Mobility and has done these steps:

- Set up end users accounts for the users who need to roam.

- Set up a device profile for the type of phones users will be allowed to log in Users have reported to the administrators that they are unable to log in to the phones designated for Extension Mobility. Which two options are the two Reasons for this issue? (Choose two)

A. The user must ensure that their main endpoint is online and registered, otherwise they cannot log in elsewhere

B. Extension Mobility has not been enabled under Enterprise Parameters.

C. The username must be numeric only and must match the DN.

D. The user device profile is not associated to the correct end user.

E. The Extension Mobility service has not been enabled under the Cisco Unified Serviceability Page.

Answer: D,E

Q19. Which two items must you configure in Cisco Unified Communications Manager to deploy Cisco SAF? (Choose two)

A. an MWI

B. voicemail ports

C. a security profile

D. a forwarder

E. a remote destination profile

Answer: C,D

Q20. Scenario:

There are two call control systems in this item.

The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.

The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows

DP:

Locations:

CSS:

SRST:

SRST-BR2-Config:

BR2 Config:

SRSTPSTNCall:

Which device configuration option will allow an administrator to control bandwidth between calls placed between branches?

A. Media Resource Group List

B. Device Pool

C. Location

D. AAR Group

E. Regions

Answer: C

Q21. Which two options for a Device Mobility-enabled IP phone are true? (Choose two.)

A. The phone configuration is not modified.

B. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied.

C. The user-specific settings determine which location-specific settings are downloaded from the Cisco Unified Communications Manager device pool.

D. If the DMGs are the same, the Device Mobility-related settings are also applied.

Answer: B,D

P.S. Easily pass 300-075 Exam with Dumpscollection High value Dumps & pdf vce, Try Free: http://www.dumpscollection.net/dumps/300-075/ (245 New Questions)