400-151 | Verified 400-151 Free Practice Questions 2021

NEW QUESTION 1
Refer to Exhibit:

Which option is the minimum number of vNICS required by the service profile to connect to all available Vlans

• A. 6
• B. 7
• C. 3
• D. 1

Answer: C

NEW QUESTION 2
Which two statements about import and export route control in an ACI fabric are true? (Choosetwo)

• A. Prefixes learned from OSPF/EIGRP L3Outs are never permitted inbound by default
• B. Prefixes learned from BGP L3outs cannot be filtered inbound
• C. Prefixes permitted inbound are redistributed into MP-BGP at the ingress leaf
• D. Export route control controls if the prefixes are redistributed from MP-BGP to the egress leaf
• E. By default import route control is always enabled while export route control is always disabled

Answer: CD

NEW QUESTION 3
Which three of the following are key components to provide network connectivity to an IoT Solution?
(Choose three)

• A. Voice
• B. Service Provider
• C. Wireless
• D. Routing
• E. Firewalling
• F. Switching

Answer: BCE

NEW QUESTION 4
Which definition of Intelligent Service Card Manager is true?

• A. part of the RISE service that is responsible for establishing initial connectivity with remote appliances (for exampl
• B. Citrix NetScaler)
• C. management software to manage Cisco Nexus devices
• D. management software to manage provisioning of RISE services on a Cisco Nexus switch
• E. part of the RISE service that resides on a Cisco Nexus switch that is responsible for handling tasks related to receiving Route Health Injection massages from appliances and programming those routes in the universal routing information base
• F. part of the RISE service that resides on an appliance (for example, Citrix NetScaler) that is responsible for sending Route Health Injection massages to a Cisco Nexus switch

Answer: A

NEW QUESTION 5
Which three editing optional of Cisco UCS Director workflow are valid? (Choose three)

• A. Rename a workflow
• B. Reorder inputs
• C. Change an input from mandatory to optional
• D. change priority of a workflow
• E. Edit tasks in the workflow
• F. Delete inputs

Answer: ABF

NEW QUESTION 6
An IoT Solution is more likely to generate a lot of analytics and data. Which of the following enables this information to be analysed and managed through integration with 3rd party devices and applications?

• A. ASR
• B. API
• C. Prime Infrastructure
• D. IP67

Answer: B

NEW QUESTION 7
How do you manually configure a vNIC MAC address?

• A. Modify the adapter policy
• B. Use the set identity dynamic-mac command
• C. Modify the dynamic vNIC connection policy
• D. Use the mac-address-table static command

Answer: B

NEW QUESTION 8
Which multicast destination MAC address is assigned to LACP?

• A. 01:80:c2:00:00:02
• B. 01:80:c2:00:00:01
• C. 01:80:c2:00:00:03
• D. 01:80:c2:00:00:04

Answer: A

NEW QUESTION 9
DRAG DROP
Refer to the exhibit.

Drag and drop the objects on the left to their correct descriptions on the right

Answer:

Explanation: A goes to C B goes to A C goes to B
Layer 4 to Layer 7 service policies contain the following:
* Services-Contains metadata (or all the functions provided by a device such as SSL offloading and load-balancing. This MO contains the connector names, encapsulation type, such as VLAN and VXLAN, and any interface labels.
* Device Script-Represents a device script handler that contains meta information about the related attributes of the script handler including its name, package name, and version.
* Function Profile Group Container-Objects that contain the functions available to the service device type. Function
profiles contain all the configurable parameters supported by the device organized into folders.

NEW QUESTION 10
The local service profiles in Cisco UCS Manager refer to global ID pools, but the IDs are not allocated.Which two tasks must be completed when checking Cisco UCS Central and/or Cisco UCS Manager? (Choose two)

• A. Verify that the registered Cisco UCS domain is not in a lost visibility or suspended state
• B. Make sure that the local pools contain enough IDs
• C. Make sure that the global pools contain enough IDs
• D. Ensure that global pools with the same name exist with available IDs
• E. Ensure that local pools with the same name exist with available IDs

Answer: AC

NEW QUESTION 11
Refer to the exhibit.

Which two characteristics can you tell about the device connected on e1/1 from the output from the Cisco UCS CLI? (Choose two)

• A. The device supports Ethernet only
• B. This device supports FCoE
• C. The device is a B-Senries server
• D. The device is a C-Series server
• E. This device supports PoE

Answer: BD

NEW QUESTION 12
Which application is used to manage a Cisco vPath deployment?

• A. UCS Director
• B. Virtual Supervisor Module
• C. Application Policy Infrastucture Controller
• D. Prime Network Services Controller

Answer: D

Explanation: https://blogs.cisco.com/datacenter/application-centric-infrastructure-aci-application-networkprofiles-for-security-and-network-services

NEW QUESTION 13
Which three virtual services are supported by Cisco Nexus 1000v Series Switch using the vPath? (Choose three)

• A. Cisco Virtual Security Gateway
• B. Cisco UCS telemetry features
• C. Cisco IMC serial over LAN
• D. virtual APIC appliance
• E. Cisco ASA for 1000v
• F. Cisco Wide Area Network Application Services

Answer: AEF

Explanation: https://www.cisco.com/en/US/docs/switches/datacenter/vsg/sw/4_2_1_VSG_1_4_1/vpath_vservices/reference/guide/vpath_vservices_overview.html

NEW QUESTION 14
On which two criteria can an endpoint be classified statically into an application EPG? (Choose two)

• A. guest operating system
• B. VLAN
• C. VM name
• D. physical leaf port
• E. DNS host name

Answer: BD

NEW QUESTION 15
The OS team has requested that you expand the receive queues of an existing server. Which action accomplishes this change?

• A. Reconfigure the default vNIC behavior
• B. Reconfigure the vNIC to the requested queue size
• C. Configure and apply a custom LAN connectivity policy
• D. Configure and apply a custom adapter policy

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapter_0101 01.html

NEW QUESTION 16
In an ACI fabric, which three types of interface are supported on border leaf switches to connect to
an external router? (Choose three)

• A. sub interface with 802 1Q tagging
• B. 1GbE Interface
• C. any interfaces that supports VXLAN encapsulation
• D. Layer 3 interface
• E. 10GbE interface
• F. switch virtual interface

Answer: ADF

Explanation: Using More than two Border leaf Switches
Border leaf switches support three types of interfaces to connect to an external router:
• Layer 3 (routed) interface
• Sub interface with IEEE 802.1Q tagging
• Switched Virtual Interface (SVI)

NEW QUESTION 17
Which three LSA types are valid for OSPFv2? (Choose three)

• A. Router LSA: an LSA sent by every route
• B. This LSA includes the state and the cost of all links and a list of all OSPFv2 neighbors on the link
• C. AS Internal LSA: an LSA generated by the ASB
• D. AS Internal LSAs are flooded only within the autonomous system
• E. Backbone Summary: an LSA sent by the backbone router to all the OSPF areas
• F. DR Summary LSA: an LSA sent by the DR router to all the others on network
• G. Default LSA: an LSA generated by the ASB
• H. These LSAs are used to propagate default route into OSPF
• I. Network LSA: an LSA sent by the D
• J. This LSA lists all routers in the multi-access network
• K. Opaque LSA: an LSA used to extend OSPF

Answer: AFG

NEW QUESTION 18
Refer to the exhibit.

How many virtual adapters (vNIC and vHBA) can be added to this host?

• A. 128
• B. 130
• C. 256
• D. 258

Answer: C