400-151 | Cisco 400-151 Dumps 2021

Proper study guides for 400-151 CCIE Data Center Written Exam certified begins with preparation products which designed to deliver the by making you pass the 400-151 test at your first time. Try the free right now.

Check 400-151 free dumps before getting the full version:

NEW QUESTION 1
Refer to the exhibit.
400-151 dumps exhibit
If you inspect a VXLAN packet at point 2, which two options about the outer fields in the VXLAN
header are true? (Choose 2)

  • A. Outer S-MAC = MAC-A ; Outer D-MAC = MAC~B
  • B. Outer S-MAC = MAC-1 ; Outer D-MAC = MAC-4
  • C. Outer S-MAC = MAC-1 ; Outer D-MAC = MAC-2
  • D. Outer S-|P = IP-1; Outer D-IP = IP-4
  • E. Outer S-IP = IP-1; Outer D-IP = IP-2.

Answer: CD

NEW QUESTION 2
Which two parameters must be identical per interface while configuring virtual port channels?
(Choose two)

  • A. network access control
  • B. Bridge Assurance setting
  • C. maximum transmission unit
  • D. Protocol Independent Multicast
  • E. IP Source Guard

Answer: BC

NEW QUESTION 3
Which two statements about geolocation policies in the ACI Fabric are true?

  • A. Geolocation is the identification of the real-world geographic location of a networking device
  • B. Geolocation policies are dynamically configured in ACI using the site address field in the spine and leaf Type-network
  • C. Creating a geolocation policy involves creating a site,floor,room,and row
  • D. Geolocation policies are configured under Fabric > Access Policies
  • E. Geolocation is performed by associating a geographic location with an IP address

Answer: AE

NEW QUESTION 4
Which two statements about VLAN Trunking Protocol are true? (Choose 2)

  • A. VIAN Trunking Protocol is a Layer 2 messaging protocol that maintains VLAN consistency by managing the addition, deletion, and renaming of VLANs within a VLAN Trunking Protocol domain.
  • B. On Cisco Nexus switches, VLAN Trunking Protocol is enabled by default.
  • C. Layer 2 trunk interfaces, Layer 2 port channels, and virtual port channels support VLAN Trunking Protocol functionality.
  • D. VLAN Trunking Protocol is only supported on Layer 2 trunk interfaces.
  • E. VLAN Trunking Protocol is a Layer 2 messaging protocol that maintains the interface VLAN configuring within a VLAN Trunking Protocol domain.

Answer: AC

NEW QUESTION 5
Refer to the exhibit.
400-151 dumps exhibit
After you upgrade Cisco UCS firmware, some of your blades have these error messages. Which description of the problem is true?

  • A. Storage provisioning is not configured
  • B. Some components are deprecated
  • C. vNIC template must be converted to updating
  • D. Service profile requires a connectivity policy

Answer: D

NEW QUESTION 6
Which option lists the cloud deployment model types?

  • A. hybrid,community,mobile,and service
  • B. public,private,mobile,and community
  • C. public,private,hybrid,and community
  • D. hybrid,public,shared,and mobile

Answer: C

NEW QUESTION 7
Which routing protocol is implemented between leaf and spine switches to propagate external routes within the ACl fabric?

  • A. Intermediate System-to-lntermediate System
  • B. Open Shortest Path First
  • C. Border Gateway Protocol
  • D. Multiprotocol Border Gateway Protocol

Answer: D

NEW QUESTION 8
Which two statements about the dynamic load balancer mode in ACI are true? (Choose two)?

  • A. The default DLB mode is “conservative”
  • B. The aggressive DLB mode has a longer flowlet timeout interval
  • C. The aggressive mode flowlettimeaut is a relatively higher value
  • D. DLB adjusts the traffic allocations according to congestion levels
  • E. The aggressive DLB mode has a shorter flowlet timeout interval

Answer: DE

NEW QUESTION 9
Refer to the exhibit.
400-151 dumps exhibit
Which two statements about this output are true? (Choose two)

  • A. Ethanlyzer is a licensed feature
  • B. Output indicate the traffic passing from one module to another (non-SUP)
  • C. Ethanlyzer is available in all CISCO IOS/NX-OS/IOS-XR devices
  • D. Outputs can be filtered using Wireshark filters
  • E. Output are for all traffic going to the SUP
  • F. Output shown are redirected to the logging flash

Answer: DE

NEW QUESTION 10
Where are domains placed when they are initially registered with Cisco UCS Central?

  • A. Registered domains.
  • B. Ungrouped domains.
  • C. Discovered domains
  • D. Acknowledged domains.

Answer: B

NEW QUESTION 11
DRAG DROP
Drag and Drop the key components of LISP from left onto the correct definitions on the right
400-151 dumps exhibit

    Answer:

    Explanation: Ingress tunnel router – it receives packets from site-facing interfaces (internal hosts) and either
    LI SP encapsulates packets to remote LISP sites or the ITR natively forwards packets to non LISPsites. Egress tunnel router – It receives packets from core-facing interfaces (the internet) and either decapsulates LISP packets or delivers them to local EIDs at the site Map server – it receives map- register control packets from ETRs.
    Map resolver – it receives map-requests encapsulated to it from ITRs.
    Routing locators – It is assigned to devices that makeup the global routing system. Endpoint identifiers --- it is assigned to end hosts.
    Note: Looks correct, just double check cisco definitions of Ingress/Egress Tunnel routers.

    NEW QUESTION 12
    Refer to the exhibit.
    400-151 dumps exhibit
    Which two options can be determined by the Cisco UCS environment? (Choose two)

    • A. Three FCoE attached servers are on the FI
    • B. Seven FCoE attached servers are on the FI
    • C. The Cisco UCS is in end-host mode
    • D. The Cisco UCS is in FC switch mode
    • E. Five FCoE attached servers are on the FI

    Answer: AD

    Explanation: Note: The above answer is correct, some portals may confuse and mention 5 servers, but if you see ‘Node Name‘field, it has 3 unique node names with 5 vNICs associated between them.

    NEW QUESTION 13
    Which three configuration can be different between EVPN vPC peers? (Choose three.)

    • A. Using a different secondary IP address
    • B. Consistent NVE1 binding to the same loopback interface
    • C. Consistent VLAN to VN-segment mapping
    • D. Consistent VNI to group mapping
    • E. Using the same primary IP addresses
    • F. Loopback primary IP address

    Answer: AEF

    NEW QUESTION 14
    Which statement about updating the service profile is true?

    • A. Updating service profile templates can have vNIC and vHBA templates that are initial templates.
    • B. Updating service profile templates cannot have vNIC and vHBA templates that are lnitialtemplates
    • C. Changes made to a vNIC templat that is an Updating template are not propagated to the service profile if the service profile template is lnitial.
    • D. Updating service profile templates can only be applied to an existing service profile.
    • E. Changes made to a vNIC template that is an lnitial template are propagated to the service profile if the service profile template is Updating.

    Answer: A

    NEW QUESTION 15
    Which statement about switch policies and leaf profiles in the ACI Fabric is true?

    • A. Switch leaf profiles are configured under Fabric > Fabric Policies
    • B. Leaf and spine profiles can be part of the same switch policy switch profile when the ports on the leafs and spines have similar characteristics
    • C. Manually configuring leaf profiles is not required because they are dynamically configure after new devices come online that are connected to the front panel ports of the leaf
    • D. Leaf profilesare associated to interface selector profiles that identify ports on the leaf
    • E. Each leaf profile in the ACI fabric must have a unique policy that identifies each single leaf

    Answer: D

    NEW QUESTION 16
    Which OSPF feature groups LSAs with similar link-state refresh times to allow OSPFv2 to pack
    multiple LSAs into an OSPFv2 update message?

    • A. LSA compression
    • B. SPF optimization
    • C. LSA throttling
    • D. LSA group pacing

    Answer: D

    NEW QUESTION 17
    You are configuring an L3Out interface for a VRF for which OSPF is configured on an ACI fabric.You notice that the OSPF routing table is rebuilt every 10 seconds. Which reason for this behavior is true?

    • A. OSPF timers are set to rebuild the RIB every 10 seconds
    • B. The loopback interfaces of the L3Out are configured with an IP addresses that is already in use
    • C. Aduplex mismatch is on the link on which L3Out is configured
    • D. This is the normal behavior of the ACI fabric

    Answer: B

    NEW QUESTION 18
    DRAG DROP
    Drag and drop the best five fundamentals that have proven to enable real world loT successes in innovative companies from the left to the right (in no particular order). Not all options are used
    400-151 dumps exhibit

      Answer:

      Explanation: Shift to Service Use the cloud Plan to Scale Automate
      Follow Industry best practices

      100% Valid and Newest Version 400-151 Questions & Answers shared by Surepassexam, Get Full Dumps HERE: https://www.surepassexam.com/400-151-exam-dumps.html (New 276 Q&As)