70-745 | What Virtual 70-745 Prep Is

NEW QUESTION 1

You need to configure the network settings for the SLB in the test environment.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. Create a logical network that uses the Private VLAN networks option.
• B. Create a logical network that uses the One connected network option.
• C. Create a private VIP and IP address pool that uses the IP range 10.10.90.2 - 10.10.90.254. Create a publicVIP and IP address pool that uses the IP range 10.10.20.2 – 10.10.20.254.
• D. Create a private VIP and IP address pool that uses the IP range 10.40.90.2 - 10.40.90.254. Create a publicVIP and IP address pool that uses the IP range 10.40.20.2 – 10.40.20.254.

Answer: AD

NEW QUESTION 2

You manage Microsoft System Center Virtual Machine Manager (SCVMM). You need to block specific packets on the virtual switch.
Which two types of virtual switch extensions can you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

• A. capturing extensions
• B. forwarding extensions
• C. monitoring extensions
• D. filtering extensions

Answer: BD

Explanation:

References:
https://docs.microsoft.com/en-us/windows-hardware/drivers/network/overview-of-the-hyper-v-extensible-switch

NEW QUESTION 3

You must upgrade all Hyper-V clusters that support an upgrade. Which 2 clusters can you upgrade?

• A. Atl-cluster
• B. Det-cluster
• C. Tor-cluster
• D. Dal-cluster

Answer: BD

Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/hyper-v-rolling-upgrade?view=sc-vmm-1807

NEW QUESTION 4

You are configuring network adapters within a Microsoft system center virtual machine (SCVMM) network fabric. You deploy switch extensions.
The switch must filter packets and choose the appropriate destination port. You need to select a virtual switch extension to include in the logical switch. Which type of virtual extension switch should you include?

• A. Forwarding
• B. Monitoring
• C. Capturing
• D. filtering

Answer: A

NEW QUESTION 5

You administer a Microsoft System Center Virtual Machine Manager (SCVMM) infrastructure. You have a Microsoft Azure subscription.
You must design a backup strategy that meets the following requirements:
*Back up the SCVMM hosts, virtual machines (VMs), and workloads.
*Use a protection agent to perform the backups.
*Automate the backup process.
You need to recommend a backup solution. What should you recommend?

• A. Windows PowerShell script that runs Disk2VHD
• B. Microsoft Hyper-V Replica
• C. WBAdmin.exe
• D. System Center Data Protection Manager

Answer: D

NEW QUESTION 6

You use Microsoft System Center Virtual Machine Manager (SCVMM) to manage your company's virtual infrastructure.
You need to install a host server that can run the full version of the .NET framework.
Solution: Install a host server that runs Windows Server 2021 R2 Server Core. Add the Desktop Experience feature.
Does the solution meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/administration/server-core/what-is-server-core

NEW QUESTION 7

You need to configure the highly available SCVMM test instance. Which three actions should you perform in sequence?

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 8

You are the system administrator for a manufacturing company. You implement a new solution for your windows server.
The file system drivers for all servers offloaded data Transfers (ODX). You need to configure the servers.
Which four actions should you perform in sequence? Rearrange in correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
We can use the FLTMC command to list filter drivers and their supported features. If the value of the support Features registry key equals 3, then ODX is supported.
The Get-ItemProperty cmdlet gets the properties of the specified items.
References:
https://blogs.technet.microsoft.com/askcore/2014/06/26/is-offloaded-data-transfers-odx-working/ https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.management/get-itemproperty?view=

NEW QUESTION 9

You manage Microsoft System Center Virtual Machine Manager (SCVMM). You plan to implement software load balancer (SLB) on Microsoft Hyper-V host servers by using an SLB Multiplexer (MUX).
You identify the following requirements: Redirect all inbound traffic to the MUX.
Ensure that all outbound network traffic bypasses the MUX. You need to configure the environment.
Which components should you implement? To answer, drag the appropriate components to the correct traffic directions. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://technet.microsoft.com/en-US/library/mt632286.aspx

NEW QUESTION 10

You plan to deploy a new virtual machine (VM) that uses the following components:
Windows server 2021
Microsoft system center virtual machine manager (SCVMM)
Nano Server
You create a Microsoft Hyper-V clustered environment and install SCVMM on a server named server1.
You need to create Nano based server image by using an SCVMM template. The image must contain the SCVMM agent.
Which 3 actions should you perform in sequence? Rearrange the answer in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Install the VMM packages offline on an existing Nano Server
If you didn't add the VMM packages when you created the Nano Server VHD, you can install them later, as follows:
1. Copy the VHD/VHDX to a location on a Windows Server 2021 machine. For example: C:MyNano.vhd.
2. Use PowerShell to install and import the NanoServerPackage provider of the PackageManagement (OneGet) PowerShell module:
Install-PackageProvider NanoServerPackage Import-PackageProvider NanoServerPackage
3. After the provider is installed, you can search and install the VMM packages (VMM agent and Hyper-V),
on the VHD using these cmdlets, where C:MyNano.vhd
is the location of thNe ano Server based VHD.
Find-NanoServerPackage
Install-NanoServerPackage -Name Microsoft-NanoServer-SCVMM-Package -culture en-US
-ToVhd "C:MyNano.vhd"
Install-NanoServerPackage -Name Microsoft-NanoServer-SCVMM-Compute-Package
-culture en-US -ToVhd "C:MyNano.vhd
References:
https://docs.microsoft.com/en-us/system-center/vmm/hyper-v-nano?view=sc-vmm-2021

NEW QUESTION 11

You administer Microsoft system center Virtual machine manager (SCVMM). You create a virtual network adapter that connects a virtual machine (VM) named VM1 to a virtual switch called SW1.
You need to configure the maximum and minimum bandwidths for the virtual network adapter. Which object should you create in SCVMM?

• A. Virtual port profile
• B. Uplink port profile
• C. Port classification
• D. Logical switch

Answer: A

Explanation:
You apply virtual network adapter port profiles to virtual network adapters. These profiles define specific capabilities, such as bandwidth limitations, and priority.
References:
https://docs.microsoft.com/en-us/system-center/vmm/network-port-profile?view=sc-vmm-1807

NEW QUESTION 12

You need to integrate WSUS with the SCVMM production instance. Which four actions should you perform in sequence?

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
The required process is as follows:
Add a WSUS server to the VMM fabric
Create and assign update baselines
Scan for update compliance
References:
https://docs.microsoft.com/en-us/system-center/vmm/update-server?view=sc-vmm-1807

NEW QUESTION 13

You manage Microsoft System Center Virtual Machine Manager (SCVMM).
You need to ensure that all virtual machines (VMs) are fault tolerant. You must set storage tier sizes.
Which three Windows PowerShell cmdlets should you run? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. Optimize-Volume
• B. Enable-ClusterS2D
• C. Set-ClusterParameter
• D. New-Cluster
• E. New-Volume

Answer: BDE

Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/storage-spaces-direct-overview https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/create-volumes

NEW QUESTION 14

You need to create the VM network for the development environment.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://technet.microsoft.com/en-us/library/gg610588(v=sc.12).aspx

NEW QUESTION 15

An organization has three physical locations that are configured as separate Active Directory Services (AD DS) sites.
You need to deploy Microsoft System center Operations Manager. The Operations Manager agents must be able to access a management server even if one management server or AD DS is unavailable.
What should you do?

• A. Deploy a secondary management server in each AD DS site
• B. Deploy a management server in each AD DS and add the management servers to the all management servers resource pool
• C. Deploy a root management server in each AD DS site
• D. Create a resource pool for each AD Ds sit
• E. Deploy a management server in each AD DS site and then add the management server to the site resource pool.

Answer: A

Explanation:
Configuration of agent assignment is managed by an Operations Manager administrator using the Agent
Assignment and Failover Wizard to assign computers to a primary management server and secondary management server.

NEW QUESTION 16

You manage Microsoft system center virtual machine manager (SCVMM). You need to enable data deduplication for the SCVMM library server. Which action should you perform for each configuration options?
To answer drag the appropriate action to the correct condition.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
MinimumFileAgeDays refers to the number of days after the file is created before the file is considered to be in-policy for optimization. You may want to modify this if you want Data Deduplication to be more aggressive.
Data Deduplication jobs are scheduled via Windows Task Scheduler and can be viewed and edited there under the path MicrosoftWindowsDeduplication. Data Deduplication includes several cmdlets that make scheduling easy. The most common reason for changing when Data Deduplication jobs run is to ensure that jobs run during off hours.
ExcludeFileType is for file types that are excluded from optimization. ExcludeFolder specifies folder paths that should not be considered for optimization. References:
https://docs.microsoft.com/en-us/windows-server/storage/data-deduplication/advanced-settings

NEW QUESTION 17

company has an Active Directory Domain Services (AD DS) domain named corp.contoso.com.
You must install Microsoft System Center Virtual Machine Manager (SCVMM) and implement distributed key management (DKM). You must follow the principle of least privilege. Keys must be stored in a container named VMMKeys.
You need to ensure that you can store the cryptographic keys in AD DS.
How should you configure the environment? To answer, select the appropriate options in the dialog box in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://technet.microsoft.com/en-us/library/gg697604(v=sc.12).aspx

NEW QUESTION 18

You use Microsoft System Center Virtual Machine Manager (SCVMM) to manage your company's virtual infrastructure.
You need to install a host server that can run the full version of the .NET framework. Solution: Install the host server using the Desktop Experience installation option. Does the solution meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/administration/server-core/what-is-server-core

NEW QUESTION 19

You manage Microsoft system virtual Machine Manager (SCVMM). You need to secure network traffic.
Which two protocols can you secure by using port access control lists (ACLs)? Each correct answer presents a complete solution.

• A. SCTP
• B. DTP
• C. DCCP
• D. UDP
• E. TCP

Answer: DE

Explanation:
General guidelines for what an access control list consist of are as follows:
Access control list name (depending on the router it could be numeric or combination of letters and numbers)
A sequence number or term name for each entry A statement of permission or denial for that entry
A network protocol and associated function or ports
- Examples include IP, IPX, ICMP, TCP, UDP, NETBIOS and many others
Destination and Source targets
- These are typically addresses and can be defined as a single discrete address, a range or subnet, or all addresses Additional flags or identifiers
These additional statements request additional functions when a match is found for the statement. These flags vary for each protocol but a common flag added to statements is the log feature that records any match to the statement into the router log
References:
https://www.pluralsight.com/blog/it-ops/access-control-list-concepts

NEW QUESTION 20

You deploy Microsoft System Center Virtual Machine Manager (SCVMM) and System Center Operations Manager (SCOM). You integrate SCVMM with SCOM.
You need to view the reports for SCVMM.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

• A. Launch the SCOM console.
• B. Launch the SCVMM console.
• C. Run the Windows PowerShell cmdlet Get-SCOMMonitor.
• D. Run the Windows PowerShell cmdlet Get-SCOMReportingSetting.
• E. View the Reporting server website for SCOM.

Answer: AE

Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/monitor?view=sc-vmm-1801

NEW QUESTION 21

You plan to deploy Windows Server Gateway (WSG) with Microsoft System Center Virtual Machine Manager (SCVMM).
You need to configure the send and receive buffers for the Hyper-V hosts.
Solution: You run the Windows PowerShell cmdlet Set-NetAdapterAdvancedProperty. Does the solution meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
You can use the following Windows PowerShell command to set the Send Buffers size:
Set-NetAdapterAdvancedProperty "NIC1" –DisplayName "Transmit Buffers" –DisplayValue 3000
You can use the following Windows PowerShell command to set the Receive Buffers size:
Set-NetAdapterAdvancedProperty "NIC1" –DisplayName "Receive Buffers" –DisplayValue 3000
References:
https://docs.microsoft.com/en-us/windows-server/administration/performance-tuning/subsystem/software-define

NEW QUESTION 22
......