DES-6322 | Latest Specialist - Implementation Engineer-VxRail Exam DES-6322 Brain Dumps

Your success in EMC DES-6322 is our sole target and we develop all our DES-6322 braindumps in a way that facilitates the attainment of this target. Not only is our DES-6322 study material the best you can find, it is also the most detailed and the most updated. DES-6322 Practice Exams for EMC DES-6322 are written to the highest standards of technical accuracy.

Free DES-6322 Demo Online For EMC Certifitcation:

NEW QUESTION 1
A VxRail 7.0.100 environment is managed by the internal vCenter Server. The customer asks the implementation engineer to deploy a new VxRail cluster using the existing vCenter Server.
What should the response of the engineer?

  • A. Not supported for internal vCenter Server
  • B. Not supported on VxRail software 7.0.100
  • C. Supported by neither the internal vCenter Server nor external vCenter Server
  • D. Only supported on VxRail software 4.7.xxx

Answer: D

NEW QUESTION 2
An implementation engineer is working with a customer to prepare an external vCenter Server for a new VxRail deployment with the VxRail-deployed VDS. What vCenter objects must exist for a successful VxRail deployment?

  • A. Cluster and VxRail Management user only
  • B. Datacenter Cluster, and VxRail Management user
  • C. Datacenter and Cluster only
  • D. Datacenter and VxRail Management user only

Answer: D

NEW QUESTION 3
What guideline should be followed when planning bandwidth between sites hosting VM objects and the witness nodes?

  • A. 1500 MTU on the VSAN vmkernel interface
  • B. 5 ms with a recommended minimum bandwidth of 10Gbps
  • C. 2 Mbps for every 1000 objects on the vSAN
  • D. 500 ms roundtrip (< 250 ms one way)

Answer: C

NEW QUESTION 4
A customer has decided that they will be using the Spanning Tree protocol in their Dell EMC ToR switches How should the switch ports used for VxRail be configured to achieve a successful deployment?

  • A. Set the port type to edge
  • B. Enable link aggregation for all ports
  • C. Set the port mode to access
  • D. Enable MLD snooping and querier

Answer: A

NEW QUESTION 5
For which typical activity would the Full data migration setting be used when placing a VxRail host into maintenance mode?

  • A. Temporary maintenance
  • B. Rebooting a single ESXi host
  • C. Shutting down an entire cluster
  • D. Permanently removing host from cluster

Answer: A

NEW QUESTION 6
Match each component of the VxRail HCI System Software to its description.
DES-6322 dumps exhibit


Solution:
DES-6322 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 7
What is validated by running the Proactive Network Performance test in vCenter on a VxRail cluster?

  • A. Latency and bandwidth measurement to the witness host
  • B. Network configuration and performance for vSAN
  • C. Network performance for virtual machines
  • D. Latency measurement between DCs for Stretched Clusters

Answer: A

NEW QUESTION 8
For which VxRail models must the iDRAC NIC Selection be set to Dedicated?

  • A. D, G, P, S, and V Series
  • B. E, P, S, and V Series only
  • C. D, E, P, S, and V Series
  • D. D, E, and G Series

Answer: D

NEW QUESTION 9
What is a consideration when implementing a custom VDS on a VxRail cluster?

  • A. Used by multiple clusters managed by a single vCenter instance
  • B. Supported with external and internal vCenter Servers
  • C. Supports only four NIC uplinks
  • D. Supports only two NIC uplinks

Answer: B

NEW QUESTION 10
An implementation engineer logs in to the vSphere Client of a recently deployed VxRail cluster. They want to review the firmware versions on the VxRail nodes.
Which view should they use to gather this information?

  • A. Hosts and Clusters > VxRail Host > Configure > VxRail > iDRAC Configuration
  • B. Host and Clusters > VxRail Host > Monitor > VxRail > Physical View
  • C. Hosts and Clusters > VxRail Cluster > Monitor > VxRail > Appliances
  • D. Hosts and Clusters > VxRail Cluster > Configure > VxRail > System

Answer: A

NEW QUESTION 11
A VxRail cluster 4.7.xxx environment is managed by the internal vCenter Server. An implementation engineer plans to deploy a new VxRail cluster using the existing vCenter Server instance, then use the customer-supplied VDS to manage both VxRail clusters.
What must be done?

  • A. Migrate the internal vCenter Server to an external vCenter Server, then merge the PSC
  • B. Upgrade the VxRail version from 4.7.xxx to 7.0.000
  • C. Migrate the internal vCenter Server to an external vCenter Server, then upgrade the VxRail 4.7.xxx to 7.0.100
  • D. Upgrade the internal vCenter Server to version 7.0

Answer: B

NEW QUESTION 12
An implementation engineer places a VxRail node into maintenance mode using the Ensure accessibility setting What is the engineer likely planning to do?

  • A. Extensive maintenance
  • B. Temporary maintenance
  • C. Permanent removal of host from cluster
  • D. Shutdown of an entire cluster

Answer: A

NEW QUESTION 13
What is a characteristic of the VxRail S Series node?

  • A. Form factor of 2U4N
  • B. Large form factor drives
  • C. Dense Flash disks
  • D. Form factor of 1U1N

Answer: D

NEW QUESTION 14
How should an administrator manually validate the DNS readiness of a customer network?

  • A. Run a traceroute to the DNS server
  • B. Generate a Network PEQ
  • C. Ping the default gateway of the management VLAN
  • D. Run nslookup on server FQDN and IP

Answer: A

NEW QUESTION 15
An implementation engineer is expanding an existing VxRail E Series cluster with an additional node The version of the node is not at the current cluster level and is not compatible
What action must be performed before adding the node?

  • A. Order node with correct image
  • B. RASR Factory Reset
  • C. RASR Factory Image Upgrade
  • D. Compute node expansion

Answer: A

NEW QUESTION 16
What code is returned when a VxRail API request is executed successfully?

  • A. 200
  • B. 207
  • C. 400
  • D. 500

Answer: A

NEW QUESTION 17
According to Dell best practices, which VxRail series can be deployed in either datacenters or remote locations?

  • A. D Series
  • B. V Series
  • C. G Series
  • D. E Series

Answer: D

NEW QUESTION 18
An implementation engineer is expanding an existing VxRail S Series cluster with an additional node. The version of the node is not at the current cluster level but is compatible.
What procedure would result in the quickest node addition?

  • A. RASR Factory Image Upgrade
  • B. Factory Reset
  • C. VxRail Node Imaging Management
  • D. Compute node expansion

Answer: D

NEW QUESTION 19
After implementation, the implementation engineer observes errors from both VxRail Manager and vCenter Server. Dell EMC support has requested a log bundle containing only the required log files. Using the simulator, create and download a log bundle for Dell EMC support.
When you have finished, continue to the next question.
DES-6322 dumps exhibit
DES-6322 dumps exhibit
DES-6322 dumps exhibit
DES-6322 dumps exhibit
DES-6322 dumps exhibit
DES-6322 dumps exhibit


Solution:
Pending
Send your suggestions for this question.

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 20
A 2-node VxRail duster Is being deployed. Due to a preparation mistake, the host section fe missing. Use the VxRail simulator to fully deploy the cluster using the JSON file.
Node Names:
vcluster-esxO 15-vrack
vcluster-esxO 16-vrack
Starting IP
Address: 192.168.10.15
Rack Name: Virtual Rack
Rack Position: 15-16
Passwords: Passwordl23
!
ESXI Management
User: esxmgmt
When you have finished, continue to the next question.
DES-6322 dumps exhibit
DES-6322 dumps exhibit
DES-6322 dumps exhibit
DES-6322 dumps exhibit
DES-6322 dumps exhibit


Solution:
Pending
Send your suggestions for this question.

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 21
......

100% Valid and Newest Version DES-6322 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/DES-6322/ (New 105 Q&As)