300-360 | Printable 300-360 Study Guides 2021

It is more faster and easier to pass the by using . Immediate access to the and find the same core area with professionally verified answers, then PASS your exam with a high score now.

Cisco 300-360 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
What document must be kept current when a customer is conducting network maintenance?

  • A. readiness report
  • B. survey report
  • C. installation report
  • D. technical report

Answer: C

NEW QUESTION 2
A customer is preparing to deploy a wireless network in a stadium and is identifying coverage area requirement for the patrons in suite areas.
Which two attributes are relevant to determining these coverage requirements? (Choose two.)

  • A. hours’ d operon
  • B. encryption type
  • C. authentication type
  • D. number of uses
  • E. device types

Answer: CE

NEW QUESTION 3
Refer to the exhibit.
300-360 dumps exhibit
An engineer has determined that Cisco 7925 phones are roaming between 2.4 6Hz and 5 6Hz radios on the same access points, which results in poor audio performance Which action must the engineer take to mitigate this issue?

  • A. Enable TPCv2 to normalize the RF environment.
  • B. Configure EDCA parameters for Voice Optimized.
  • C. Configure the Cisco 7925 phone to only use 5 6Hz.
  • D. Enable Band Select on the WLAN

Answer: B

NEW QUESTION 4
You must create a simple implementation of QoS on a WIAN. The implementation must allow clients to prioritize traffic into these four classes:
voice video best effort
background
Which option do you enable?

  • A. NBAR2
  • B. NetFlow v9
  • C. WMM
  • D. Cisco AVC

Answer: C

Explanation: WMM Classification
WMM uses the 802.1P classification scheme (part of the IEEE 802.1D MAC Bridges standard). This classification scheme has eight priorities that WMM maps to four access categories with WMM designations:
AC_BK--Background AC_BE--Best effort AC_VI--Video AC_VO--Voice

NEW QUESTION 5
The wireless team must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco 7925 phones. Which two WLC settings accomplish this goal? (Choose two.)

  • A. Configure AVC profiles on the SSID
  • B. Configure mobility groups between WLCs
  • C. Use AVC to tag traffic voice traffic as best effort
  • D. Use Cisco Centralized Key Management for authentication
  • E. Configure AP groups between WLCs

Answer: BD

NEW QUESTION 6
IEEE 802.llk-2008 is an amendment to IEEE 80211- 2007 standard for radio resource management. A wireless engineer is designing a wireless network to support real time applications over wireless. Which IEEE protocol must the engineer enable on the WLC so that neighbor list radio management packets are sent to the wireless devices?

  • A. 802.1 1r
  • B. 802.1 1w
  • C. 802.1 1i
  • D. 802.1 1k

Answer: D

Explanation: You can optimize roaming for non-802.11k clients by generating a prediction neighbor list for each client without sending an 802.11k neighbor list request. When prediction based roaming enables a WLAN, after each successful client association/re-association, the same neighbor list optimization applies on the non-802.11k client to generate and store the neighbor list in the mobile station software data structure. Clients at different locations have different lists because the client probes are seen with different RSSI values by the different neighbors as the clients usually probe before any association or re-association. This list is created with the most updated probe data and predicts the next AP that the client is likely to roam to.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enter prise_Mobility_8-1_Deployment_Guide/Chapter-11.html

NEW QUESTION 7
When implementing video teleconferencing over a wireless network, which three attributes should be considered when cell planning? (Choose three.)

  • A. latency
  • B. jitter
  • C. throughput
  • D. packet loss
  • E. client association
  • F. number of users on the network

Answer: ABD

NEW QUESTION 8
You must perform a Layer1 survey by using Metageek Chanalyzer on the current operating mode is configured for Cisco CleanAir AP?

  • A. Local
  • B. SE-connect
  • C. Monitor
  • D. Sniffer

Answer: A

NEW QUESTION 9
A customer is deploying a Greenfield 802.11ac network on a floor that will support approximately 300 wireless devices. Which setting needs to be changed on Prime Infrastructure Planning Tool in order to predict the amount of access points the customer needs to service the new floor?

  • A. Data Coverage Support Margin
  • B. Demand Settings
  • C. Add AP Field
  • D. 802.11n Protocol Support

Answer: C

NEW QUESTION 10
A customer has deployed an N+N redundant wireless infrastructure. In this deployment, the access points have been salt and peppered between controllers. What configuration would be necessary to cut down on the use of mobility tunnels for voice clients?

  • A. mobility anchor
  • B. KIS based CAC
  • C. media session snooping
  • D. re-anchor roamed voice clients

Answer: D

NEW QUESTION 11
An engineer has added an access point to a deployment after a post-installation site survey. The engineer then notices that there has been an increase in co-channel interference and retransmissions. Which two features can help mitigate the issue? (Choose two.)

  • A. Coverage Hole Detection
  • B. Transmit Power Control
  • C. Enhanced Distributed Channel Access
  • D. Cisco Compatible Extensions
  • E. Dynamic Channel Assignment

Answer: CE

NEW QUESTION 12
Which three factors must you consider before you deploy APs to a wireless network located in a warehouse? (Choose three.)

  • A. conveyor belts
  • B. employee schedules
  • C. ceiling height
  • D. variable inventory quantities
  • E. types of walls
  • F. deliveries

Answer: BCE

NEW QUESTION 13
What is the result if a client radio is incapable of supporting all the 5 GHz channels you have deployed in the controller or APs?

  • A. You may only be able to deploy 20 MHz-wide channels.
  • B. This may result in the client having to roam more frequently to find a channel it supports.
  • C. This may result in coverage holes in the network.
  • D. You may only be able to deploy 40 MHz-wide channels.

Answer: C

NEW QUESTION 14
An engineer is configuring a new VoWLAN and wants only IEEE 802.11g/n to be supported. Which two data rates should be configured? (Choose two.)

  • A. 18 Mbps and higher should be supported.
  • B. Lower than 24 Mbps should be supported.
  • C. Lower than 24 Mbps should be supported.
  • D. 1, 2, 5.5, and 11 Mbps should be disabled.
  • E. 11 Mbps should be mandatory.
  • F. 6 and 9 Mbps should be supported
  • G. 12 Mbps should be mandatory.

Answer: AG

NEW QUESTION 15
During a post-deployment survey, the wireless engineer notices that offices in surrounding suites also have wireless networks and the 2.4 Ghz band is highly utilized Which configuration must the engineer make on the wireless network using this new information?

  • A. Disable 802.11 b/g data rates.
  • B. Enable Band Sect in the WLC
  • C. Disable RRM in the WLC.
  • D. Enable rogue access point containment.

Answer: D

Explanation: Monitoring Rogue Access Point Alarms
Rogue access point radios are unauthorized access points detected by one or more Cisco lightweight access points. This page displays rogue access point alarms based on the severity you clicked in the Alarm Monitor.

NEW QUESTION 16
When should a Layer I site survey be performed?

  • A. briefly during the predictive site survey
  • B. briefly during the passive site survey
  • C. for an extended period of time during the predeployment site survey and during the post-deployment site survey
  • D. for an extended period of time during the predeployment site survey only

Answer: C

P.S. Easily pass 300-360 Exam with 168 Q&As Surepassexam Dumps & pdf Version, Welcome to Download the Newest Surepassexam 300-360 Dumps: https://www.surepassexam.com/300-360-exam-dumps.html (168 New Questions)